On the bench: Frankenstein Coleman Handy Gas Plant

Подписаться 1,3 тыс.

50% 1

What do you get when you mix a tank and generator from a 413 stove with a Handy Gas Plant? Well, you get a 35,000 BTU beast that you can easily transport. Best of both worlds? Worst of each? Watch and find out!
Gotta give proper credit to where it's due!! Gavercronos on CCF came up with this crazy idea and I just ran with it. Now I just have to come up with a bit more durable (no wood! Hah!) mounting method.
9:19 Show me the fire!

Опубликовано:

29 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@justinchampion5468 Год назад

Thank you for showing us the mutant! - I was always fascinated by the gas plants and even the hollow wire lighting systems, but alas they're almost unobtanium around here. I love seeing parts of your collection, and I hope you continue making content on these neat old fuel burners.

@gasunderpressure9131 Год назад

You are welcome! It's so well behaved now after running it a while; it's really a joy to use. Glad you're enjoying the vids, there's lots more to share!

@georgepeller1730 Год назад

You missed your calling. With that golden voice you should have been a radio announcer

@gasunderpressure9131 Год назад

You are too kind! Thanks!

@texaswoc3461 5 месяцев назад

Thanks! I’ve been looking at gas plants. Your vids are really helpful

@mikemorgan5015 Год назад

Nice little setup! I mounted a 457 burner in a 413 case. Just the burner itself, no grate or heat shield, of course. It stays out by my gas grill. Beastly cooking power. I've been talking about cutting a section out of the case for a smaller footprint, but like a lot of projects, I haven't gotten round to that one.

@gasunderpressure9131 Год назад

Hmmmmm! That sounds interesting. I think I may have a spare 413 lying about...time for another project!

@jasonwildebrandt2034 Год назад

Super cool, I like it. Great way to keep them going

@AndrewsBill1 Год назад

I piddle around with these HGP's and have been studying a means to adapt a 20 ld LP tank to feed a 457 burner. Would a solid brass needle valve work in place of the main fuel cutoff valve on these devices ? I was thinking of running the needle valve in series with the generator to meter the fuel flow. Any thoughts on this matter ?

@gasunderpressure9131 Год назад

You can use a propane converter from a stove with a 1lb bottle like this: i.imgur.com/Mx8RB13.jpg and then you can attach a bulk hose to that. It ran pretty solid on the 1lb bottle. Not sure how the gas tip from the 457 would work in there, might be way too big?

@AndrewsBill1 Год назад

Gas, do you still have the tank fuel valve off the old tank ?

@gasunderpressure9131 Год назад

No, because this was just a spare head I had from swapping out the 457 for the 460 head.