No video :(

OneUp Components Dropper Post V2

Подписаться 4,4 тыс.

Просмотров 38 тыс.

50% 1

A look at the 210mm OneUp Components Dropper Post V2 with the 2.1 actuator.
Get yours here: Post - tidd.ly/a7913d82 Remote - tidd.ly/c0009d84
V3 - tidd.ly/3PmwHqN V3 Remote - tidd.ly/3vbck9m
DROPPER POST V2 SERVICE - CLEAN - can.oneupcompo...
DROPPER POST V2 SERVICE - REBUILD - can.oneupcompo...
www.oneupcomponents.com/
SPECS:
Drop 120mm, 150mm, 180mm, 210mm and 240mm adjustable*.
Diameter 30.9, 31.6, 34.9
Routing Internal only
Remote Compatibility:
SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV - 12 speed XTR M9100 only (M8100 and M7100 use 22.2mm clamp)
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
22.2mm Bar Clamp - All other groups including 12 speed XT M8100 , SLX M7100 and all 10 speed Shimano
Cable clamping remote only (post requires cable stop to be assembled at base of post)
Travel Reducing Shim Reduces travel by up to 20mm.
Weight
Post Only
(30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
(31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
(34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g
Remote Only
Remote with 22.2mm Bar Clamp - 46g
Remote with SRAM Matchmaker X / I-spec-EV - 43g
Remote with Shimano I-spec-EV - 43g
Remote with Shimano I-spec II - 41g
Housing and Cable (1300mm installed length) - 50g
Instagram: / jedmtb
Subscribe - bit.ly/2zS1N13
Music Credit: thefantomson.b...
#oneupdropper #oneupcomponents #oneup #oneupdropperv2
Any purchase links that appear in the video description are affiliate links. They do not alter the price you pay, jedmtb earns a small commission on each sale which helps to support the channel.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@isozero7265 3 года назад

This is the solution for my short inseam and Orbea Wild FS with an obstruction placed in the post tube to prevent burn through during the welding manufacturing process. It is too bad one requires me to route their cable through the frame because no doubt that will be a nightmare. Thanks for sharing this vid , much appreciated. :-)

@SnootchieBootchies27 4 года назад

Who would have thought that a short insertion length would be such a good thing

@TeamCykelhold 4 года назад

You can lower the lever by unscrewing the mmx on the bar and place the lever further down. No need for it to sit that high if you dislike it.

@Naxxn 3 года назад

Thanks for this Jed. Bought one after watching your video 🤙🏼

@GokkunGuru 2 года назад

Very good looking and well designed low stack dropper.

@egbah428 4 года назад

So let's get started. Love it

@Jamesthebikeguy 4 года назад

A nice look at this dropper. I think it appears pretty good!

@alwaysonyoutubem8 4 года назад

best install vid on youtube dude. thanks

@florihupf 4 года назад

So let’s get started! Nice. :)

@moonmuscle3332 2 года назад

Love me a JebMTB viddy...say Jed, what are you liking dropper wise these days? 170mm and up. Thanks brotha

@jedmtb 2 года назад

The OneUp and PNW Loam are both good, if you want to spend more then the BikeYoke Revive 2.0 is very good.

@moonmuscle3332 Год назад

@@jedmtb Looks like the new Woldtooth Resolve is a solid option for highly engineered dropper post---only problem is the top end of the Resolve is 70g (or more) than the OneUp v2...even though I could lower a 200mm Resolve 20mm in my seat tube (currently running a 180mm OneUp), the added 70g+ of mass at the head-unit doesn't seem to offset the fact I lowered the post a measly 20mm. Their claim of having "mass lowered when post is dropped, WolfTooth Resolve is the best" or whatever the marketing told us. I'm a fan that it clicks on full up/down though.

@ealvarez9541 4 года назад

Do you have issues lowering the post while riding? I cannot lower my post unless I remove my weight from the post first. I've tried torquing the seat post with a torque wrench but nothing I do resolves this...

@jedmtb 4 года назад

Mine did it at first because I didn't leave enough slack on the cable in my frame and under compression it was pulling the cable too tight, if you can't get it working I'd consider contacting OneUp as their customer service is normally excellent.

@ealvarez9541 4 года назад

@@jedmtb Thank you!!!! I adjusted the barrel adjustment in both directions and it is fixed!

@jasonedens3778 4 года назад

I've ridden mine for a couple of months. Easy install, etc. I just began having an issue with it extending all the way. I'm going to try checking the air pressure by removing the seat to access the valve under the seat post head. One Up states it should be between 250 and 300 psi. Question: have you had any issues with it losing pressure?

@jedmtb 4 года назад

Hi Jason, I haven't had any issues with my two posts yet, did you have any luck checking the pressure on yours?

@jsniderhan 4 года назад

@@jedmtb Im curious on reliability issues of this post as well. I also heard there is a little bit of lateral play, have you found this as well?

@MaplePanda04 3 года назад

@@jsniderhan Try unscrewing the seal collar and adding a little grease under it to help add extra lubrication. The side to side wiggle is normal and is not a problem.

@sandykavor8434 3 года назад

I have been running original Cube post which I think is something like Brand-X and I don't have any side to side play when fully extended. However I had a crash just few days ago and the inner shaft moved inside the outer post shaft. I managed to straighten it back, but I assume maybe pins got damaged?

@jedmtb 3 года назад

Worth checking the guide pins as they're normally made of soft brass.

@slwbys 4 года назад

Did you use a standard SRAM matchmaker after all? Looks like it. Sadly the MMX version is sold out and my reverb just broke so I need a new post asap. Thanks :)

@jedmtb 4 года назад

Yes I just used a standard matchmaker off my reverb

@slwbys 4 года назад

@@jedmtb thank you so much this helped a lot

@DM-hw4cr 3 года назад

After using the one up 210 mm dropper I will say that it is cheaply constructed with a poor sealing system that constantly needs lubrication. Spend the extra $100 and get a fox transfer.

@jedmtb 3 года назад

Not used a Fox post before but have only heard good things off people who do.

@JasonChambersPhoto 3 года назад

Hey Jed, is there enough tilt adjustment?

@francisconunes2212 3 года назад

Nice review I'm thinking to buy one But I got one question How do I know what pressure to use?

@jedmtb 3 года назад

The pressure determines the speed, so you set it based on how fast you like the return speed.

@francisconunes2212 3 года назад

@@jedmtb ok thanks

@jack91522 2 года назад

Have you tried the wolftooth lever? Heard it was a good lever as well

@jedmtb 2 года назад

Yes, I've used the light action version which has been very good.

@Mgtowfreedom Год назад

Is there any web pages to check your bike for the right size ?

@jedmtb Год назад

Some bike brands will show the max post size on their website but most don't in which case you'll need to measure your frame. Here is a dimensions chart tinyurl.com/4xk5jy6r and a length selector tinyurl.com/bp8r2emd

@tezzasaurusrex 4 года назад

Does the seat post pull up when say you lift your bike up by the seat. My ks Lev does that and I hate it...

@jedmtb 4 года назад

No it doesn't, I've had a few posts in the past which did and your right its annoying.

@daginge29 4 года назад

Alright man, I'm going to be replacing my KS Lev dropper with this one, will I be able to use my existing lever and cables etc?

@jedmtb 4 года назад

Hi, KS have a number of posts and levers so it does depend on which you have but yes you should be able to.

@timmontanus4311 3 года назад

Hello, i have the same exact dropper (180mm) and it has developed some noticable play over 4 months time approximately. It started off great with minor play which I couldn't notice while riding but now i can and it's pretty annoying. Also when it's fully extended and i get off the saddle while riding over roots/stones it sort of rumbles/make noise. Has anyone else experienced this and knows how to fix it? Thanks :)

@jedmtb 3 года назад

The do a set of oversized pins for removing play that can develop. uk.oneupcomponents.com/products/dropper-v2-oversized-pin-kit

@timmontanus4311 3 года назад

@@jedmtb Thank you! I'll look into it.

@MrMilio 4 года назад

Can you stop the seat on every position along the travel?

@jedmtb 4 года назад

Yes

@seanmcnamara9029 2 года назад

Hi there, I’ve watched your video I’ve just bought the sram mmx to fit on my sram level T brake lever how does it fit to the brake lever clamp or do I have to buy the sram brake lever clamp

@jedmtb 2 года назад

Hi, for the level T you would need to buy the two bolt style Avid matchmaker clamp. www.wiggle.co.uk/avid-matchmaker

@seanmcnamara9029 2 года назад

I’m having problems with the Oneup dropper post it’s coming up slowly I’ve been told to pump it 250-300 psi that is the only thing I haven’t done

@jedmtb 2 года назад

@@seanmcnamara9029 Yes, more pressure will increase the speed.

@seanmcnamara9029 2 года назад

What brakes have you got on your mtb.

@jedmtb 2 года назад

@@seanmcnamara9029 They are SRAM code.

@ShoneDaddy 4 года назад

Mine just failed on me 2 days ago. Goes up and down on its own.

@jedmtb 4 года назад

That sucks sorry to hear that, have you had any luck getting it replaced yet?

@ShoneDaddy 4 года назад

Jed MTB Getting in contact with worldwide cyclery to process a warranty exchange.

@carlinanderson2605 4 года назад

Did you ever figure out if this was a defective post? In my experience the issue you were having is normally caused by the cable and housing having an issue and not am issue with the seatpost itself.