Onewheel GT sensor issues? Here's 5 ways to fix that

Подписаться 79 тыс.

Просмотров 11 тыс.

50% 1

Is your Onewheel GT sensor not working? Do you have problems getting your onewheel to start/won't start at all? In this video, Jeff will show you how to fix your onewheel sensor with 5 ways to fix sensor activation! The Onewheel GT was notorious for "ghosting" on release, causing the board to go flying backwards after the rider dismounted. Future Motion, the maker of the Onewheel GT, responded by making the sensor harder to activate consistently. Many users reported their Onewheel GT won't start at all after their change. This video will give you the best ways to fix your activation/sensor issues to alleviate or completely fix the issues you might have with it! Tell us in the comments which on of the 5 ways helped you fix your GT Sensor!
Furniture Pads: amzn.to/43rMsAV
Gripples: thefloatlife.com/products/gri...
Surestart: thefloatlife.com/products/sur...
Chapters:
0:00 - Intro
0:20 - All of your friends laugh at you
0:30 - Lets fix that
1:09 - Explaining the Sensor
2:20 - Way number 0
2:50 - Number 1
4:23 - Number 2
5:48 - Number 3
8:36 - Number 4
9:46 - Number DONT DO THIS
13:28 - Jeff forgot to drink his Kombutcha
Join this channel to get access to perks:
bit.ly/3g2piyc
Sign up for text alerts when videos drop!
tinyurl.com/tflalerts
Follow us on Social!
Instagram: @TheFloatLife
Facebook: @TheFloatLife
Reddit: U/TheFloatLife
OUR FILMING GEAR:
Microphones: tinyurl.com/DJI-Mics
Gimbal: tinyurl.com/DJI-RS3-Pro
Black Magic 6K Pro Camera: tinyurl.com/Black-Magic-6K-Pro
Cannon R5 Camera: tinyurl.com/Cannon-R5
GoPro Hero 10: tinyurl.com/GoPro-Hero-10
Insta 360 Go2: tinyurl.com/Insta360-Go-2
Atamos Shinobi Monitor: tinyurl.com/Atamos-Shinobi
Samsung T5 SSD: tinyurl.com/Samsung-T5-Harddrive
DJI 3 Mini Drone: tinyurl.com/DJI-3-Mini
Rode Mic: tinyurl.com/Rode-Video-Micro
Camera Cage: tinyurl.com/small-rig-camera-...
To learn more about Onewheel Accessories, make sure to visit our Onewheel Accessory Guide here: thefloatlife.com/pages/onewhe...
TFL Enduro Tire - GT: bit.ly/3CWVT1z
TFL Enduro Tire - XR: bit.ly/3TmcVv5
TFL Life Savers - GT: bit.ly/3Ti6UQb
TFL Life Savers - XR: bit.ly/3RSELy4
TFL Tire Sealant: bit.ly/3MuDlZJ
TFL Homebrew Rails: bit.ly/3rUOVna
TFL Onewheel Footpads: bit.ly/3RYmwqY
TFL Onewheel Grip Tape: bit.ly/3RYYtYU
TFL Onewheel Stand: bit.ly/3EFPKbc
TFL Onewheel Bearings: bit.ly/3CTO1h6
TFL Onewheel Sidekicks: bit.ly/3EFvM0m
TFL Onewheel Lock: bit.ly/3rPPKOj
TFL Lifestyle Clothing: bit.ly/3CsMXiV
#TheFloatLife #Onewheel #TFL #FloatSupply #Esk8 #PEVcommunity #ElectricRidables #OnewheelLifestyle #JeffMcCosker #NightRiding #WheelFunStuff #BodhiHarrison #ElijahSoto #FloatOnMyFriends #Onewheel #OnewheelXR #OnewheelPint #OnewheelRider #OnewheelGang #OnewheelPlusXR #OnewheelAccessories #OnewheelNation #OnewheelTricks #FloatPlates #TheAccessoryOG #Esk8 #PEV #Esk8Squad #Esk8Riders #Esk8r #Esk8ordie #Esk8Life #DestroyBoredom

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@leeweber85 Год назад

Anyone else trying to figure out if there’s a hidden coded message with the mic holder changes?? [C]up, [S]lide, [P]ig, [P]ad? [?] [R]ail … No? Just me?

@TheFloatLife Год назад

The truth is out there...

@leeweber85 Год назад

@@TheFloatLife playing mind games. 😂

@baileyanderson2166 Год назад

I appreciate that you guys show other and even cheaper options then the stuff you sell! Good dudes y’all are.

@SeanPaulNotTheSinger Год назад

These types of videos are fantastic. It shows the different options available, even stuff that doesn't get sold by you, but it's building the brand reputation along with showing the community the ways to do things without royally screwing themselves (and not being able to buy aftermarket stuff). I love all your content. The trick tutorials, the follow me series, the scenic ride sessions, the lunch runs, rep your set, how to assemble, pod/vlogcast, and even the long form videos that are practically documentaries. Each brings a different element that either teaches about the sport in some fashion or just shows what is possible, with enough tries to get it. Also, the collabs with other creators are great, whether with Flux Mvmnt, Braile Riding, or Scot Mendenhall and Friends. The beanie baby mic holder might have been my favorite in the mix. Also, I love the baseball-inspired shirts. I didn't know you had those until this video. I scurried right over and picked up the Oakland inspired one, as I grew up a fan. Now that I live in Arizona, the shape of the A has changed, it leans more and is definitely more bitey, but I still catch the A's games when I can.

@C-3PFLO Год назад

I love the mic holder changes 😂😂

@ZACHATTACK9696 Год назад

I don't normally comment but I just have to tell you guys that the sure start is hands down one of the best investments I've ever made for my board. Easy install works like a champ! I've had 3 people ride my board after installing and all 3 of them went and got one the same day.

@TheFloatLife Год назад

Stoked you're digging it!

@SteveSiz Год назад

@@TheFloatLife I can 100% vouch for this too. I built an entire GT with all addons and a SureStart. I rode the board brand new ( never rode farther than 100 feet) I rode the board in the timed qualifier and semi-finals at Shredfest, having never ridden the course for practice, and never had a GT before... and it gave me confidence and the pad sensor engagement was flawless!! (Jeff, I showed you my orange dipped rail badge on my WTFs)

@rutterer9684 Год назад

Great list! “Flat Kick” footpads were the solution for me, and killed two birds with one stone - I didn’t like how inflexible my foot positioning felt on the concave pads (let alone ghosting/activation issues, both of which I had pre- and post-recall, respectively). So, while after all that I was a bit bitter giving FM more money for yet another set of pads, I was ultimately glad I did!

@jeffsnider2913 Год назад

Julian is killin it on this edit!! 🤣 🤣

@SirWrender Год назад

I kept watching just to see how many different things Jeff would put the mic on 😂🤣

@justenjoyyy1820 Год назад

Right on time, got my GT 3 days ago and having sensor activation issues. Told FM the issue and asked if I could just buy a front flack kick pad. Nope, they said they only sell in a set. Gonna give the gripples a try. Thanks!

@TheFloatLife Год назад

Whack!

@Floating_Jaffa Год назад

Surestart pro all the way ❤ Just ordered flat pads as well

@borillasnaps Год назад

Nice job guys!

@chubabay Год назад

I did the plastic removal on the flat pads. About 1k miles later, it’s doing great! But I also did that before most of these other methods existed.

@kelniEYL Год назад

#6 Rewheel posi-sensor :)

@TimmyJUnderground 20 дней назад

I'm 36 seconds in and YES! This is me currently please let there be a solution.

@bodeyjamison7096 Год назад

Good video. Thanks!

@TheFloatLife Год назад

Glad you liked it!

@dryniex 7 месяцев назад

The easiest way really is to activate single zone in the zone engagement settings. Open OW app -> tap settings in riding profile -> scroll down to zone engagement -> select single zone. Done! Starting is way easier and this setting does not affect heel lift stopping

@treyhyre5948 6 месяцев назад

That doesn't work for me

@francisgeorge8270 Год назад

#6: Re-install original footpad. Mine worked flawlessly for months. Seriously contemplating this.

@spungy1216 4 месяца назад

Tysm

@TheFloatLife 4 месяца назад

@DavidKyle Год назад

I'm a few months new @ 300 miles on a euro-posi w/ simple stop, and it's never ghosted on me. I jump off sometimes as well. Never had a missed start with it. I think this is an easy method for beginners. I'm about ready to upgrade to a SureStart when those low riders come in. I like the smart options it offers.

@TheFloatLife Год назад

Good stuff!

@Floating_Jaffa Год назад

Great vid! Option 5 indeed not recommended i messed up my new footpad in the first weekend riding it on trail.probably a little sharp stone pierced the sensor 😢

@vdzrussell Год назад

Surestart for the win.

@TheFloatLife Год назад

Simply the best

@turismokgtl Год назад

Holding something different every shot! lol ONEWHEEL GT! 🤙🏾

@PoopTart3 Год назад

More videos like this please 👍

@TheFloatLife Год назад

Will do! LMK what you want to see next

@johnthomas1422 11 месяцев назад

So glad I didn't send my gt back when they got recalled, it still works great.

@SoarswithSwords Год назад

I switched to Platypus v4 and never had an activation issue again. Lots of great options out there!

@TheFloatLife Год назад

We've had a lot of people come through the shop with faulty Platypus footpads that dumped them at speed and off drops

@SoarswithSwords Год назад

@@TheFloatLife were they the V4s though? I've heard from lots of people that the V3s and earlier had issues that have been fixed with the 4s. I've got about 500 miles on my pad now with flawless activation.

@Mikesonbikes 2 месяца назад

@@TheFloatLifeahh I just bought a used board with platypus and I keep dropping the board on heelside turns 😢

@tonyrivas8952 Год назад

I really want to transplant a sensor onto my 65 bit Retro Kushpad for the GT. Would it be better to transplant the stock fm sensor or use a single zone sensor?

@davegalanie Год назад

Great explanations Jeff! ☠️@ your edits Julian, ty 😂 still wish FM would make the flat front footpad a stock GT option in configuration. I have size 15 feet, have over 8k miles, and the stock GT front concaves are 100% an issue and liability for anyone with over size 12 feet. Took spills on tiny curb drops and flatland spins due to engagement cutoff & immediately bought front FM flat footpads (wish I could just get front from FM) which fixed all main issues (outside of need for posi, which should be an option (along w/ deactivation delay) in GT firmware update, just like simple stop) @onewheel

@chantal7 Год назад

Your microphone holder switching is awesome, lol!

@TheFloatLife Год назад

Which one was your favorite?

@chantal7 11 месяцев назад

@@TheFloatLife The WTF gold rail for sure - hahaha.

@zack7152 16 дней назад

Activating fine. What do you do when you get a red sensor while transferring to reverse?

@KetchupSuicide Год назад

I had huge problems activating my gt, furniture coasters has worked perfectly for me, works 100 times out of a 100, not one time has it not activated and ofc use black coasters and it's possible to use some very small ones so it doesn't look as bad.

@johnkapono Год назад

Clip the mic to your shirt. Looking like Carson Daly from MTVs Total Request Live lol

@TONYD_FLOAT_WITH_ME 6 дней назад

The leash is my favorite.

@joe5834 Год назад

I don't know, number five went really well for me. I used 4mm ignite foam grip and never looked back. I had a pre recall pad as a backup too

@fixmypev Год назад

#6 | **REDACTED** (rhymes with “free meal” and who doesn’t like those?) 🤙🏼⚡️🛠️ Great video!

@NikkiDimesYT Год назад

I personally did #5 and it worked *great* for me. That said, I have a friend whose board ghosted after doing it, so yeaaaaah, maybe not worth it 😅

@wastedinc Год назад

I didn't like the furniture coasters, and the Gripples didn't exist yet, so I just got a roll of Velcro Tape, sliced off six inches at a time, and stuck it to the edges of the griptape. It diffuses pressure inward beneath my Size Fifteens, and almost looks like it's actually supposed to be there. That's on my GT. On my XR, I just added some ShredWings; those work too.

@TheFloatLife Год назад

Gripples definitely exist!! 🤙

@wastedinc Год назад

I did the Velcro last year. But, next time I need it....

@alexandresauve-boisvert3798 Год назад

I still on my first sensor pad. And keep my bran new one by recall stand by 😇 1st gen on sensor pad have 2 layer too 🥴

@logancouture4257 10 месяцев назад

Does the Euro POSI have any negative effects as to shorting out the control board? I did this mod and on the first ride, my board disengaged mid ride and wouldn’t turn back on. Sent it to FM and had to get the control board replaced

@TheFloatLife 10 месяцев назад

That shouldn't have anything to do with the Euro posi.

@logancouture4257 10 месяцев назад

@@TheFloatLife alrighty!! Just wanted to make sure. Sounds like it was just a coincidence… I’ll do it again when I get my board back from FM😂 appreciate the response

@Eddiep80 10 месяцев назад

So my GT started doing this around 95 miles. I noticed one of the two T25 machine screws underneath that holds the front footpad down was missing. I put a screw back in it, and it seemed to fix the issue. Because my foot pad was slightly loose it caused activation issues.

@TheFloatLife 10 месяцев назад

Glad you figured it out!

@TheAnimeist Год назад

That was a lot of cool merch. :) But where do I get the sliced rubber chicken from? (5:48)

@TheFloatLife Год назад

Hahaha that's a Level 2 TAC Jacket pad: thefloatlife.com/collections/t-a-c-series-apparel/products/t-a-c-pads-2-0

@yodojo3493 10 месяцев назад

Love you Jeffy

@xxXasfoulasiXxx Год назад

Ok I need to know where that ADORABLE pocket knife came from!

@TheFloatLife Год назад

Julian bought us them. He said they're called Fat PP 😅

@xxXasfoulasiXxx Год назад

😂😂

@Bartasfilo Год назад

4:26 Best microphone ever 👌🏼🐽🤣

@matthewhale657 Год назад

Hey guys does anyone know if the “Posi” trick with bridging the thin wire from one hole to the adjacent hole will work for a Pint? I’ve been having front sensor pads for a while and would like to Posi the whole footpad. I think i read theres a way to solder certain parts to do this but I’m not really interested in that route.

@TheFloatLife Год назад

Yes

@slayerficated 9 месяцев назад

See Also: Rewheel if you have an OG pint. They have a free software option that gives it posi when you first get on so you can still heel lift (and it's totally free there is nothing to buy it's an update over bluetooth)

@mikeloveschona Год назад

What about Re- wheel?

@eugeniustheodidactus8890 7 месяцев назад

I thought the two sensor operation switches into a one sensor operation above 1 mph. Maybe I am wrong, but isn't the two sensor operation just for activating and deactivating the. board's motor below 1 mph ?

@aeraglyx Год назад

After a grip change my Pint X activation was so bad that I had to remove one plastic layer, add some grip tape strips and euro posi all at the same time to fix it. Not saying I recomment it... I hope the Floatwheel sensor is good.

@TheFloatLife Год назад

Sheesh! What grip tape?

@JR_69420 Год назад

I guess my old footpads are pretty valuable 😅

@JoseVijarro-st3gm 7 месяцев назад

So removing the extra plastic layer between grip tape and sensor won’t cause “ghosting on my Low Boy foot pads?

@TheFloatLife 7 месяцев назад

It's possible that it will, but unlikely.

@user-bx9nr2wr5d Год назад

I like rolling my foot off the front of the board as a euro posi heel lift option when you're at a complete stop.

@TheFloatLife Год назад

Now that's a move there!

@crazya8038 Год назад

idk if its a software thing but mine activate pretty easy, i can stand beside my board and put my toes and activate it

@PlanetOwner Год назад

I may or may have not put my original front pad back on 3 minutes after putting the replacement pad from fm on🤫 solid info here to keep us all floating now get out and make some more follow me vids Jeff✌️

@Robert-uv1hw Год назад

I know it's not great news if you're trying to sell products, but my GT sensor has been fault free from day one. Weird side note though, my serial number was eligible to have the pad replaced for ghosting issues, but I've just never had any problems. Replacement pad is sitting in my crawlspace. Pint X though - sensor doesn't pick up every launch. My GT has yet to miss one.

@TheFloatLife Год назад

Yes, as I mentioned in the video the pre-recall pads on the GT were fantastic. The problem is they had too high of a ghosting rate

@nanisantana2155 Месяц назад

What is a sure start ?

@user-bx9nr2wr5d Год назад

Even with the euro posi setup, my GT will turn off on about 20% of my drops, even the average curb, nothing huge. It's enough to make it unreliable. I'll install the SS Pro eventually, but first I have to work through my anger issues that the GT has this problem in the first place.

@IansRcFun Год назад

Uhh.. bought my gt 1 week ago tomorrow. Ive got 120 miles on her already and never had an issue with activating it..

@pseugoi Год назад

Is that WTF rail matte gold or gloss gold?

@TheFloatLife Год назад

That's one of the original #1/69 matte gold

@pseugoi Год назад

@@TheFloatLife So nice of you to save it for me. Send me an invoice for the set :)

@fixmypev Год назад

00:06 - Pshh. 😅

@TheAnimeist Год назад

6:17 Or you can use simple stop.

@ARCGRAPHIX2011 Год назад

Wait wait wait ur telling me I have to fix a brand new board out the box?! 🤔 $2200 for something that doesn’t work correctly, how bout a coupon code Sir!

@MrFitbikeco10 3 месяца назад

Right out of the box my gt sucks it’s so sensitive it takes 20 tries to take off

@xavisuarez Год назад

I love this dude teaching onewheel stuff I would listen him reading full audiobooks, just saying 😃

@TheFloatLife Год назад

So weird because I always thought my voice was whack 😅

@malusvici 5 месяцев назад

Yeah, this sensor pad issue almost got me killed today. For the safety of all riders I was really hoping this was just a defect with my board. Anyone know a petition or way to contact onewheel to get them to revert the changes to the sensor pad? Falling into traffic because your board suddenly decides that your heel is lifted is no fun.

@hoboman444 Год назад

Appreciate you keeping us safe out there since Future Motion won't. GT with curved footpads should never have been sold because of 1:51 the geometry - they are unlike every other (lawsuit-less) OW model. They deserve every bit of the lawsuit and should be forced to sell GTs stock with flat pads. Can a product qualify as good (or even safe) if it has to be fixed out of the box??

@Exile-exe Год назад

6th way is to replace the sensor with one that works.

@TheFloatLife Год назад

Still waiting on that one

@Exile-exe Год назад

@@TheFloatLife very VERY soon, sir. Hang tight and stand by…it’s ready.

@landonlove4101 Год назад

Hmm I wonder why y’all are pushing people to buy the sure-start so much? 🤔🤔😂

@TheFloatLife Год назад

Floatspiracy

@landonlove4101 Год назад

@@TheFloatLife😂🤙🤙

@IthaloHudson Год назад

Yeah, one day Float Life will press a button and all boards across the world with sure-start will wake up and then they will rise up against humanity and Float Life will dominate the world with their army of automated onewheels!! (put's on thin foil hat) ps.: aaaand many of those will be water proof (because of them too!) and we wont even be able to drown them!!!