Opcom Walkthrough Corsa D 

I'm trying to connect to diagnose airbag light and pretensions. Do we need the car pass or something as so far I've been unable to get the car to talk back respond.

I have error of bcm in diagnosis but in real I have a blinking light of glow plug in dash and poor fuel economy in my corsa d 2008. It's consumers 10 litre per 100 km and RPM jumps from 800 to 1000 . Please help if anyone have any idea about this problm

Can radio code be found with this opcom device? Mine beeps and shows radio safe message. Got no code for it ...

Hi Tom, could you tell me what firmware version your opcom has? thank you so much!

how to change the km on the speedometer and activate the on-board computer?

Hello! Thanks fov video! Could you tell - what could choose in menu "Special" at the year choice page?

I get a program display message on the radio display on my corsa 2012 will this be able to help?

Hi, can you help me, my op com doesn't let me change the gateway configuration after replacing the abs pump

I have opcom, where do I get the security code from?

my car was originaly set to 30000km oil life or 365 days afther changing that oil life function to disable and back up to enable the INSP0 appeared and I can't reset it.... now my only way to get rid of this insp 0 is to set oil life function to disable and reset...

Hi thomas, iv had new ecu cloned but car wont start. Looks like no power coming into the 4 injectors. Any ideas

Hello Tom! I have a 2013 Insignia (before the facelift) and I would like to ask if it's possible to make the parking radar display go segmented. By that I mean when I put the car in R I can see how close the things are in the front but when I back up I only hear beeping not seeing any bars going up. I hops this makes sense to you..

Hi, when I get to checking interface mine won’t connect to the car for some reason, don’t really know which of the options to select. Any ideas? Thanks

Hi Tom, very interesting video, I've got a Corsa d 1.2 energy 2013. Dash has Bluetooth /radio display computer that sticks up on dash..(cd30??) I was wondering if it would be possible to enable the fuel computer with no issues.Some 'energy' models seem to have fuel computer but ours hasn't. Are you in North Staffordshire?,any advice appreciated, thanks, Dave

Does anyone know if there are options for the Twintop cars, roof controls and monitoring?

Thanks for the video man, really helpful. May I ask what is the security code that you say ? Because it’s something that you also mentioned it in another video of yours and you said that you bought it.

Trying to do a 'DPF Replace' using the Opcom on a A13DTC engine, but the option isn't there. Does anyone know of any tool to do this (as struggling with the Opcom). Thanks in advance.

hi, I got op-com unit but my 2014 software does not respond at all. but i can communicate to ECU using 2010 version. could you please share 2014 software version you use please.My car is 2013 version. thanks in advance.

Absolutely can't get it to work. The interface works. Furthest I've got is getting as far as programming a key transponder only for programming to fail. That was on v2010. OpCom 2012 and 2014 won't communicate with ECU at all.

Tom was just wondering is there a way to clock the corsa with opcom

Hi i have installed opcom and interface test fine but when I connect to car error comes interface communication error or interface not power from car anyone can help pls

Hi mate do you have the link where you bought your interface from? Cheers

Would I need this to change my damaged ECU

Hi can you please measure voltage when you start the car with nothing on just low beam lights? And can you please measure voltage when you steer left and right? Im having a problem when l turn steering wheel voltage drops from 14v to 13v and them car shuts off power steering. So l need to turn off and then start the car for power steering to come back. Thanks

@Tom's Driveway sorry i know this is an old video... but very helpful.. hopefully you get time to reply.. I was hoping to see the options under transmission... does this allow you to change the gearbox diff ratio? My gearbox blew up and the one I fitted is a different ratio causing cruise control to not work and the shift up light to stay on..

How do you install the software onto ur device, it doesnt show up

Could we read radio code for CD30?

I’ve extracted from the disk, I connect it as you have in the car and click diagnostics and I get, please connect your interface to the USB port, or install the usb driver! Sorry mate I’m thick, can you help me out what I need to do?

Is it possible to change software as i heard complaints where you have to change the software of TIS-2000 to without DPF but with rail pressure regulator?

Hi, I have an astra 2011, the menu bottom give no response at all, do you know how I can change that?

Hi, which are the best OPCom and software for my 2009 Opel Corsa D 1.2 Z12XEP?

Hi mate, just trying this today, its exactly the same as yours, every option i choose im getting communication error with interface, lights are on opcom, laptops recognises it, ignition on..identical to you, only dif is mine is 2013 d...but nowt!! Any ideas

I just brought opcom from eBay but I can't get it too work saying ecu doesn't not reply

Do you need the car pass for adding the extra tab to the gid?

Are you using windows 10 or windows 7?

Very good video was wondering do you have a link to buy this myself please

Wish I had a Corsa D, this isn’t compatible with the E Good vid tho ! Thanks x

Is a 2014 Corsa D 1.4 with A14XEL engine available in the clone software? Just asking for a friend. :p

Need some help mate Its saying interface not found And I'm stuck now lol. Any advice?

nothing wrong with reset ecu. haha mad fella

Hi, can you give me a link on where you got this from ?

thanks

Will this also find a missing security code ?

Could you help me please

Jakie jest firmware?

Where do you get the security code

Is there some tunning with an opcom?