OpenRGB - What is it and how can it help me?

Подписаться 6 тыс.

Просмотров 30 тыс.

50% 1

Take a brief look at the OpenRGB software. It's not new, but if you're not familiar with it, it's worth checking it out if you're looking for new ways to control RGB lighting.
This software works with many different RGB devices allowing you to control all your RGB under one Roof, at least that's the attempt!
I can recommend you download it and give it a try.
For more software like this, Check out the SignalRGB video: • SignalRGB - Dominate a...
Using the following Links benefits the channel at no additional cost to you, thank you if you choose to use them!!!
Check out My Amazon store for more products I recommend and use
www.amazon.com...
Thanks for watching!!!

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@travelsgaia 7 месяцев назад

So sad nobody shows how to perma save the settings!

@6kuts 2 месяца назад

you have to safe the profile, which yes won’t remember the lighting when you turn off your pc, but if you go into settings, you can set it to “load profile on launch” for example.

@hasankhaddam540 6 дней назад

Does it have a plugin that adds a timeline for animated effects kind of like aura creator ??

@I-MAC 15 дней назад

The only problem is that this application does not run automatically when Windows starts up and will stop working when it sleeps. So you have to activate it again manually in the tray icon. I did not find any solution for this.

@whoknowswho832 2 месяца назад

virtual maps and effects plugin can show how good this software can be

@obsoleteobsession 5 месяцев назад

OpenRGB just killed my motherboard - B550 chipset. Look it up, it happens. Pass on this one, folks.

@HardwareArtisan 5 месяцев назад

Hi obsoleteobsession, that doesn't sound good, that sucks in fact, sorry to hear you've had issues. I haven't had any issues with Open RGB when i've used it, but I will look into problems with B550 boards, do you have any specific sources of info on this problem? Thanks for the info!

@silfrido1768 5 месяцев назад

Should have read comparability first, try flashing a newer bios version or the same one you have to see if your lighting comes back to normal.

@MrVidification 3 месяца назад

mainly read about errors with ram causing them to lose rgb function eg the post 'teamgroup ddr7600 openrgb trying to thaiphoon burner recover them'

@silfrido1768 3 месяца назад

@@MrVidification you should be able to turn off the rgb & change the lighting effects. mine works with no issue. wish I was able to turn on the rgb on my 4090 tho

@MrVidification 3 месяца назад

@@silfrido1768 my own hardware is ok,I removed the bloated msi software and just use openrgb, although I like the idea of syncing with audio. signalrgb isn't worth a sub though. some forums mention artemis rgb works with openrgb but I think that's probably just for creating your own lighting patterns. most software should become compatible with the 4090 eventually.

@bowriing 7 месяцев назад

How did u manage to get the sl120 lianli hub discovered by openrgb? How is it wired in ur system.

@HardwareArtisan 7 месяцев назад

Hi bowriing, the sl120 controller makes a USB connection to the motherboard, so there should be nothing special to get it connected. Just install the latest L-connect software and set it up normally, then OPEN RGB should recognize it....usually...Good Luck and thanks for watching!!!

@bowriing 7 месяцев назад

So I need to have L-Connect and OpenRGB installed at the same time at all times. Or can i just do this for recognition and uninstall L-Connect when OpenRGB is setup? @@HardwareArtisan

@bullettime2808 2 месяца назад

V1 controller is not supported you need SL V2 controller

@Neamerjell 16 дней назад

One major issue that I had that is all over the internet and unsolved is detection of Corsair Vengeance RGB Pro memory. I solved it by updating my motherboard's BIOS -at least until I reboot, we shall see...

@reginaldbutler2 6 месяцев назад

how do i save my effects? when i close the program the effects dont save.

@philjoshuaemendoza4636 2 месяца назад

same issue bruh

@valentinosgsxr Месяц назад

Hi and thanks for the video. Anybody knows how to revert the changes I have done to my motherboard and get it to factory default? My board is an MSI board. Thanks.

@MysticalProductions332 Месяц назад

everytime i enable the effect, nothing happends its literally just a waste of time

@locki064 7 месяцев назад

i changed it 1 time and now its never going back anymore

@marimthe1083 3 месяца назад

Good afternoon. I downloaded the APP and the colors as I wanted, but unfortunately, every time I turn on the PC, the colors are not saved. Colors return to the factory original... Is there a way to save the profiles and automatically have the desired colors saved every time you turn on the Pc? Thanks

@marimthe1083 3 месяца назад

I found where to save the profile, whenever I turn on the PC the saved profile also turns on automatically.

@sawdust8691 2 месяца назад

I had the same problem. But I found in the general settings I could check launch on login, launch minimized, and load profile. Now it launches itself and loads the profile I set a few seconds after login

@russunknown 10 месяцев назад

anyway to add icue profiles to it?

@Tech-Is-Magical 9 месяцев назад

Is visual map same as the layout in SignalRGB? So you place your devices corresponding to your physical layout of the pc?

@ai-aniverse 5 дней назад

similar yes

@stephen7627 5 месяцев назад

great software !!! , one thing i wanna ask if im using effects , the colors on my ram cycle smothly ( with transition fading ) , but my mobo and cpu rgb's changes the colors static ( no transition whatsoever ) , if i tweak just the rgb fan/mobo it cycles smoothly . .damn wish i had video , thx