Optimizing Solar Power: Connecting Various Panel Sizes for Maximum Efficiency Budget-Friendly

Подписаться 10 тыс.

Просмотров 3,1 тыс.

50% 1

Connecting solar panels involves wiring them together in series or parallel configurations to increase power output. In series, positive to negative terminals are connected, adding voltages; in parallel, positive terminals are connected and negative terminals are connected separately, increasing current output. Proper installation ensures safety and optimal performance.
BougeRV 200W Panels
👉bit.ly/Bougerv200wPanel
Calpha 100W Panels
👉bit.ly/Calpha100W
Bateria Power PV Cable
👉amzn.to/48Q5vry
Bateria Power Branch Connector
👉amzn.to/3II1GK8
Bateria Power Crimper
👉amzn.to/3PmclxW
MC4 Connectors
👉amzn.to/3varLyC
100W Panel Mount
👉amzn.to/3Ploi78
200W Panel Mount
👉amzn.to/3TE6QgR
Bluetti AC200L
👉bit.ly/AC200L
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Recommended Online Store For Solar Equipment.
Signature Solar
👉signaturesolar.com/?ref=Roll2
Practical Preppers Store
👉bit.ly/PracticalPreppersStore
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Contact info: 📧 roll2videos@gmail.com 📧
I'm not available for consultation or personal project advice.
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
🛑I (Roll2Videos) want to clarify that this channel's content is created for entertainment and informational purposes. Some activities featured in our videos may be performed by trained professionals and should not be attempted without proper expertise, supervision, and safety precautions.
By watching my content, you agree that you understand the risks associated with any actions demonstrated in the videos. I strongly discourage attempting to replicate any activities or actions you see on this channel without seeking professional guidance and ensuring your safety.
Please note that I cannot be held responsible for any injuries, damages, or adverse consequences that may occur if you decide to replicate, imitate, or participate in activities demonstrated in my videos.
Your safety is paramount to me, and I encourage responsible decision-making when engaging in any activities inspired by our content. If you have any safety concerns, always seek expert advice and take appropriate precautions🛑
#bateria #solar #LiFePO4 #LFP #battery #offgrid

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@Roll2Videos 3 месяца назад

Signature Solar 👉signaturesolar.com/?ref=Roll2 Practical Preppers Store 👉bit.ly/PracticalPreppersStore

@boomermatic6035 3 месяца назад

You have a nice setup there with your arrays, I'm working on some similar ideas for my house, I don't like the idea of panels on the roof where I don't have easy access to them. Closing in on 10k subs too, keep the videos coming.

@Roll2Videos 3 месяца назад

I'm glad to inspire people. I wouldn't go the roof route unless a professional does it.

@scarygary3569 3 месяца назад

Like how ya figured that out,get me thinking once again.

@Roll2Videos 3 месяца назад

Lol, Always thinking 😁

@scarygary3569 3 месяца назад

I've always thought I needed a seperate charge controller for different arrays that have different panels. You obviously have shown that I don't need to do so as long as I don't over shoot voltage. I know over shooting amps isn't as important or is it? I really wished I went with 200watt panels instead of (15)100watt panels but that being said, if I can incorporate a string of 200s with my 100s,I won't be as bummed. Back to the new solar project board...YAY just in time for spring/summer.

@Roll2Videos 3 месяца назад

Be careful not to go over the amps as well. Good luck with your project

@paulbarrette2557 3 месяца назад

Perfect explanation. I did not know about the fuse ratting part but I rarely connect my panels in parallel. Always something to learn I guess 😅

@paulbarrette2557 3 месяца назад

I have the exact same C-T multimeter. Had it for 20+ years... Never failed on me.

@Roll2Videos 3 месяца назад

@paulbarrette2557 I'm not sure how old mine is; it came from my Dad's garage years ago. Thank you for watching 👍

@JR-kk6ce 6 дней назад

Humm, I tried connecting two strings of different wattage panels. Just like you, one string was 200 watts, the other 100 watts, which I hooked up just like you. Everything worked fine until about 1 1/2 years later when I noticed a power drop. At first, I thought it might be due to passing clouds. Then, I thought it might be dirt on the panels. So, I went to clean them and noticed many thin, shiny lines in the panels. It turns out the panels were degrading prematurely, and the manufacturer said it was due to connecting different watt panels together. So, I hope the same doesn't happen to you.

@Roll2Videos 6 дней назад

I don't see how that's possible. Sounds like a manufacturing issue to me.

@johngrimley3523 3 месяца назад

I'm getting ready to hook up my second Growatt for 220 split phase and I will add another 1200 watts of panels. Programming the growatts is a pain hopefully it goes well.

@Roll2Videos 3 месяца назад

I'm sure you'll figure it out. Have fun 😁

@scarygary3569 2 месяца назад

So on your math for panel layout,you multiplied the overall voltage by the 10.99amps. Is that based on the lower amps being the default that the controller will go to automatically? Basically making that lower array only draw upto 10.99amps even tho its capable of 11.7?

@Roll2Videos 2 месяца назад

This RU-vidr explains it better than I could. Skip to 4: 20 in the video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jejro4zkl8I.htmlsi=paKrrnUP7VQNJhcC

@sun-sea-solar 3 месяца назад

I've got 4 x 230 watt and 2 x 410. My hybrid inverter can take 60 - 500 volts. I think I worked out the maths. All the 230 watt panels in series. 120 volts vmp. 8 amps imp. Then 2 x 410 in series 80 volts vmp and 11 amp imp. Then the 2 sets in parallel. Does this sound about right

@Roll2Videos 3 месяца назад

It should be, or you'd notice the loss in production.

@sun-sea-solar 3 месяца назад

@@Roll2Videos I've only done it recently. I've tried so many combinations because I've got so many panels. 3 different systems. So to setup it up to get the most out of is a pain in the arse. Need to get rid of old poly 230 panels. Take 10 of them to produce same as my 4 new mono crystalline panels

@Roll2Videos 3 месяца назад

@sun-sea-solar Maybe one of the 230s is no good.

@sun-sea-solar 3 месяца назад

@@Roll2Videos just very old , 12% efficiency compared to half cell 23% makes a huge difference. Especially in the cloudy UK . If I could go back in time to a year ago. For the same money If I bought stuff now it would 3 times capacity and power/ production

@Roll2Videos 3 месяца назад

@sun-sea-solar I know; it's wild how much the price has changed over the years.