Orca Slicer getting started guide: A slicer for all of your 3D printers

Подписаться 508 тыс.

Просмотров 216 тыс.

50% 1

Check out my 2nd channel, TT Racing: / @ttracingyt
A while back, I discovered Orca Slicer, a fork of Bambu Studio that could handle Bambu Lab 3D printers as well as other Marlin and Klipper machines too. Since then, it has evolved and I have adopted it as my primary slicer.
My patron Derek asked for a beginner’s guide on migrating to Orca Slicer. In this video, we cover download and installation, first run, basic slicing, security tips and other useful features. There is plenty that’s beyond the scope of this video, but hopefully enough is covered to let you hit the ground running.
Orca Slicer GitHub: github.com/SoftFever/OrcaSlicer
0:00 Introduction
Original Orca Slicer video: • Bambu Studio OrcaSlice...
0:45 What is Orca Slicer?
2:43 Why have I switched to Orca Slicer?
4:12 Download and installation/update
Orca Slicer releases: github.com/SoftFever/OrcaSlic...
5:07 First run - Network plugin and account login
6:49 Setting up printers and filaments
8:17 Exploring profiles: printer, filament and print settings
9:40 Basic model importing and slicing
10:47 Projects and plates
Infill modifiers video: • Master infill to take ...
14:13 Paint-on supports
14:48 Modifiers
15:38 Calibration
16:05 Security: stealth mode
Bambu Lab article on what modes allow what: wiki.bambulab.com/en/software...
Discussion of stealth mode development: github.com/SoftFever/OrcaSlic...
16:34 Conclusion
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 301

@scaredyfish 7 месяцев назад

I wish everyone would just stop with all these forks and just collaborate on one piece of software.

@barrettm.9918 2 месяца назад

Broke it down soooo well. Also coming from Prusaslicer wanting to check out orca features & single slicer for all printers.

@silentmodetv 8 месяцев назад

The multiple plates feature is an excellent idea.

@MarinusMakesStuff 8 месяцев назад

I believe that was adopted from Bambu Slicer? Though maybe it was the other way around 🤔

@Conargle 8 месяцев назад

@@MarinusMakesStuff bambu has indeed had it for a while now

@xenontesla122 8 месяцев назад

I switched from Cura to Orca and it’s worked very well! One thing that I liked more with Cura was that Z positions are defined from the bottom of a part, not the middle. I wish there was a toggle for it, since it makes placing modifier parts way easier.

@rmksledhead63 6 месяцев назад

This is the only thing I prefer in cura after learning orca

@ronfrancis5476 Месяц назад

Clear and concise, yet sooo full of little details! Many thanks, as I'm now a convert!

@veersstreams9065 8 месяцев назад

You do so much for this community - thank you! I'll be testing Orca out with a project this weekend.

@joshwyse1761 7 месяцев назад

This is a great video; thank you very much. I've been using Orca almost exclusively for several months, and you pointed out a few really great features and tips that I was not aware of.

@MilesLabrador 8 месяцев назад

Hearing "Slick 3R" outside of my head is surreal haha. This is awesome!

@tamvalley415 8 месяцев назад

Your smiling at the end is gettin better! Kudos to your coach

@cybergnetwork588 7 месяцев назад

I ‘ve definitely subscribed. You know what you are talking about. It is very clear and detailed. Your hard work is appreciated. Keep going!

@deamondaldoff2195 7 месяцев назад

I like how clear your videos always are. And you're explanation are amazing. Would you be willing to do an advanced setting video? myself I'm fairly adept in Oracle slicer But sometimes I don't even know what I don't know. And I always appreciate being able to watch it and learn something new.

@airingcupboard 8 месяцев назад

I bet part of the popularity is also down to your videos. I switched after your last one. Thanks for your work Michael.

@Benjamin_Reese 8 месяцев назад

Nice overview, thank you. I'm going to try Orca out now.

@VampireOnline 8 месяцев назад

Just switched to orca for my K1. Loving it so far!

@themountain59 7 месяцев назад

I must must say I was not convinced when I tried it first but your clip certainly brought me back to check it again...thanks👍😉

@3dmazter Месяц назад

Thank you for this information. It was all I needed to start using Orca Slicer.

@gaveintothedarkness 6 месяцев назад

Outstanding video. Many useful tips that I will be coming back to.

@andrevanrossum8408 8 месяцев назад

This is another great video. Thank you very much! I certainly want to give Orca a try.

@justaguy4788 3 месяца назад

Things have changed since just 4 months ago. at 9:52 there is another option "add handy models". Orca cube is under this now

@nicholaswillcox 5 месяцев назад

I just came across Orca slicer and am using it to chase down a bear of a problem, so thank you, AGAIN lmao, for the education. Cheers from Texas.

@axeman2638 8 месяцев назад

Thanks, you make really clear and well explained content. This look to have some new features prusaslicer lacks, will give it a try.

@aL3891_ 8 месяцев назад

The multi plate feature is really neat, gonna have to check it out

@MCsCreations 8 месяцев назад

Very interesting indeed! Thanks, Michael!!! 😃 I'm thinking about getting a Creality K1 or the Bambu Lab P1S... We shall see which, but I think I've already chosen my slicer. 😊 Anyway, stay safe there with your family! 🖖😊

@1957snowy 6 месяцев назад

Great Introduction have yet to try it

@tomdroidtube 8 месяцев назад

Pleas more Orca Slicer Videos!!! Awesome

@poppin_freshgaming4334 8 месяцев назад

I moved to Orca about a month ago and absolutely love it. I didn't mind Cura, but not having all settings in one massive laundry list on the side that I have to scroll through is nice. I also really like the device tab so I don't have to flip back and forth to a web browser to see what is going on in my Sonic Pad and two printers. Awesome video as always. I learned a few things today I had no idea Orca could even do that I should definitely be using!

@timm3802 2 месяца назад

I think its nice to have it all listed in the right side, so you won't forget anything before upload. It fairly quick to run them through....

@RandomGgames 8 месяцев назад

I've been experimenting with OrcaSlicer a bit recently. I've been enjoying it, and there's a lot still being done to improve it. I recently helped get a default ender 3 profile added and someone else just recently helped add multi layer elephant foot compensation which I'm really happy to hear.

@dr.grimm. 8 месяцев назад

i tried switching from cura with my upgraded (klipper, micro swiss direct drive and dual 5015 blower fans setup) ender 3, but no chance. even at 50 mm/s my cura profile slices better and my main reason to upgrade is faster prints. could you share your profile details?

@IImorteII 4 месяца назад

Great video. Professional as always!

@Rcschim 6 месяцев назад

Very nice explanation! Your videos are so well made! I was to dumb to find the temperature settings here ;) great set of feautres!

@dr3ifach 8 месяцев назад

Started out with Cura, them migrated to SuperSlicer based on your videos. I wanted to migrate to PrusaSlicer when 2.6 and tree supports launched, but was having trouble with my start and end GCode working properly. I might give Orca Slicer a try.

@gzilla14031 8 месяцев назад

I was really hoping you made a video on Orca Slicer I really like how you break everything down

@sabont9231 8 месяцев назад

I was literally asking what slicer to use to accomplish this exactly with a spread of Mk4, mk3S+ and Bambu! Thanks!

@1Wolverine2 Месяц назад

Thanks for the video, I've been trying to start using Orca for some time, will finally give a go. I miss the right side panel of Prusa, looks more straight forward with all the infos readily available.

@leonnel2750 8 месяцев назад

I 've been 3D printing for a around 5 years now, being in South Africa, its not TOO widely available, we dont have all the different machines etc here, and if we get them they are very pricey, so I always look for bargains.. Long story short, I got my hands on a CR6-SE around 18months ago, I managed to get it dialed in pretty good, and its printing ok. I decided to try other slicers to see if it makes a difference, and MAN o MAN I am over the moon with the quality i get now using ORCA... I recommend it to ANYONE!!

@AlexDoesYouTubes 8 месяцев назад

The only things I don't like about Orca, and feel free to correct me if I'm wrong; No option to add an additional wall every other layer, I don't know how much this actually helps with strength and getting better adhesion between walls and infill, but in my brain, it makes sense, and I miss is. Less options for adaptive layer height than Cura. No option to choose which printer to send a print to, if more than one printer is assigned to an IP address (I have two Ender 3 V2s running Klipper off a Raspberry pi), although this is a small gripe, as I'll usually just have Fluidd open in my browser and dragging and dropping gcode files is just about as easy.

@santiagopostorivo 8 месяцев назад

The adaptive layer functionality is pretty similar to prusa slicer, which is far from what cura offers. But I do not use it that much, but when I need it, I just switch to Cura.

@brucoder 5 месяцев назад

One tip about the portable Zip. It's a best practice to remove any .DLL file from the original folder before copying in the new version. Depending on the version of the new .DLL files from the updated version, you could end up with conflicting .DLL files in the folder, leading to what developers call DLL hell. It may not hit you evry time you do the copy, but it's only a matter of time befor eit does, leaving you scratching your head about why things are broken.

@rodneysmith1750 8 месяцев назад

Excellent video Michael! Thanks for the introduction to Orca, I've been looking around for an alternative, it is time for me to learn something new.

@RDUBTutorial 2 месяца назад

Great video...I'd like to suggest a video where you just go through and explain ALL the of options in Speed, strength and quality sections of orca. I just got the hang of most of the general settings in cura and now Im overwhelmed with how many options I am presented with in Orca....but want to understand them.

@Samirocs 5 месяцев назад

Thanks! I plan to buy a new printer, I will definitely switch to Orca

@r3dsnapper 5 месяцев назад

The new latest version is amazing!

@mscir 8 месяцев назад

Well done, thank you.

@wolf12077 8 месяцев назад

Thank you for a great Video.

@VICTORYOVERNEPTUNE 4 месяца назад

perfect just what i needed

@AndyBlackman 8 месяцев назад

Good info. Thanks!!

@harelboaz 5 месяцев назад

Thanks for this excellent guide, I’m waiting for my Xl 5 heads printer, It would be great if you could add a guide for the multi head slicer. Thanks.

@Johnny5Toy 8 месяцев назад

I can't wait for CHEP to do this exact same video with less detail in 3 months time!

@dr.grimm. 8 месяцев назад

but CHEP shares his profiles, and they are very useful to me

@microsoftsarker 7 месяцев назад

Thank you for this.

@Karylos1299 5 месяцев назад

After watching i think i will give it a try

@NexGen-3D 7 месяцев назад

Orca Slicer is the best thing since sliced bread!

@boitmecklyn4995 2 месяца назад

This was a bit of a learning curve coming from cura but the features it has are great!

@argusz 8 месяцев назад

What I want to see in slicers is a command to straighten the model along x or y on the plate. Some people convert their models slightly rotated so that it will fit on smaller plates, butt on odd angles and it is difficult to revert the rotation.... it is useful when you want to split a model, or want to resize only in one direction.

@henkdevries2971 8 месяцев назад

As a work around, until this feature is implemented, wouldn't it be possible to use 'place on face' and rotate 90⁰? It's tedious, but should work, right? 😅

@tegmentoo 6 месяцев назад

thank you the orca slicer fixed missing connection my k1 and prusa mk3s

@squaresphere 7 месяцев назад

This is awesome, I've been using SuperSlicer but it hasn't been updated in a year and i'm really missing out by not having stuff like tree support.

@TeachingTech 7 месяцев назад

Same for me. It was definitely a factor in my change.

@matthieust-arnaud8545 8 месяцев назад

I don't know if many are aware that .step files can be uploaded to Orca as well. I personally like how it improves your printed model's fidelity. We are no longer bound to meshed models only!

@greensheen8759 8 месяцев назад

Parametric slicing let's goooo

@milosreznic 8 месяцев назад

After switching from Cura to Orca my Ender3v2 started flying, and I notice acceleration is finally working. In cura I just could not find the way for it to work. I am loving Orca so far.

@byzmack1334 3 месяца назад

Holy crap I have so much to learn. LOL.

@zk_6312 5 месяцев назад

Looks good though different than the one I downloaded some time ago. It was so confusing to try and find anything that I ended up not using it. I normally use Cura except for fixing non-watertight models. I was happy with Cura until recently when somehow it got corrupted and would no longer slice with supports. I had to delete the two folders in the appdata directory which fixed the problem, but then all my custom settings and profiles were gone and I had to recreate them. I might try Orca Slicer again depending on if they have a profile for the Ender 5 S1.

@swisshoumi 8 месяцев назад

Really hope it will include toolchanger support in the future im not really completely satisfied with any other slicer for my snapmaker with the dual extrusion module

@Mainuh 3 месяца назад

3D print noob here. I really thought I’d give Orca slicer a shot after watching this, but can’t get it to print over wifi to my new Ender 3 V3 KE. Tried to setup Octoprint but can’t figure out how to access the ssh functions. Orca looks great, but I guess I’m stuck with Creality Print for now. That is printing great over my wifi. Maybe a video on adding plug ins and more detail on setting up wifi printing? Thanks

@michaelgaraphoto 7 месяцев назад

awesome video as always! I'm using a klipper based Neptune 4 Max and am trying to work out how to pause my print at a certain height in Orca? Will I have to manually add it to the gcode, or can it be done directly from IN Orca? Any tips would be appreciated!

@inspectionsbybobllc5277 8 месяцев назад

I use Repetier to talk to all my printers, so my main slicer can talk to everything already. I would love to find a slicer that does everything... WELL. Simplify3d's new release is very very good. It just works. It is not as tunable as other slicers, but it works. It just works. That said, what makes them so good, their slicing algorithm, is biased in that you can have models where it just won't see parts... weird, but reproducible. Cura has some "plugins" that suit special needs. It also has a great set of calibrations and primitive stuff. Lastly, Prusa. Their slicing algorithm is also different, and sees things very different than Simplify3d or Cura. Something invisible to S3d the other see. SuperSlicer -was- good, even great for a while, and then Prusa and Cura had releases with new things that SS didn't... and combined with some internal struggles and...well... they are behind All these rants are mine, just a low level,Hobbyist with no patience

@OldCurmudgeon3DP 8 месяцев назад

It would be nice if Superslicer profiles could be imported since that fork has sadly seen little development over the last year.

@mbravorus 8 месяцев назад

Seconded. I have quite some effort invested in multiple filament and print profiles/settings, and the inability to import is a major pain. Starting from scratch or manually recreating is a lot of work.

@learobinson 8 месяцев назад

Orca slicer is incredible, it's decreased workload getting my models to my printers. I can open my project sliced for one printer but say I want to do the same model on a completely different type of printer and flavour firmware it just takes a couple of clicks. great video to go over the basics but you are wrong where you state orca slicer only works on single extruder printers, I'm using orca slicer for my IDEX snapmaker J1.

@siggiingason1306 5 месяцев назад

Hi and thanks for creating so many videos that have helped me using various slicers like Prusa slicer for my Tenlog TL-D3Pro idex printer. From what you said in this video, Orca does not currently support two print head printers or the paint on colour facility in the Prusa slicer. Are you aware of any other slicers that support two print heads and has the paint facility that Prusa has? Pruca has all the features to support my IDEX printer, but I'm always looking at other hopefully better slicers to play with.

@johncurl1897 7 месяцев назад

Thanks!

@AndrewAHayes 8 месяцев назад

I tried it for a month but could not get on with it, Not having a global temperature setting was one missed feature, getting something sliced that would take me a few minutes in Cura took me forever with Orca, Cura is like a well worn pair of slippers for me and so I went back to Cura.

@netmaster78 8 месяцев назад

Please do a video on the Slicer settings and options for the AMS. It can´t wrap my head around how to deal with a dual AMS and how to set a specific filament to it´s position in the AMS.

@danieldc8841 8 месяцев назад

Glad to hear you’re free of S3D

@Tutorialgarage 5 месяцев назад

Hello Michael, Sorry for my poor english. Thank you for your great videos, they help me out - most of the time. I added in Orca Slicer my "Ender 3 V3 SE" and everything works well. But I see that I can't change the build plate in the program. I like to buy an PEI plate for my printer, but how can I tell Orca Slicer that I use an different plate? At the moment the dropdown menu ist grey... Thank you for your time and effort kind regards Harry

@noanyobiseniss7462 8 месяцев назад

Very good job giving appropriate accreditation. :)

@StevenKelley 5 месяцев назад

Just started using Orcra, great video this helped a lot! I do have a weird issue. The build plate graphic is smaller than the grid I have laid out. I'm not sure how that happened or if its a concern.

@barrya5473 4 месяца назад

Great video. I have a V400 and am wondering if there are any profiles I would need from FLSun or do I just use the generic klipper / mainsail? Thanks again.

@fluppir 7 месяцев назад

Thank you so much for your very informative videos. I was wondering if you could help - I can't seem to add generic filaments to my Ender3 printers. What am I doing wrong ? I select all the filaments but only the Creality Filaments show up.

@nobodytoyou4887 7 месяцев назад

1 setting i have yet to find in orca slicer that cura has his an infil multiplier, love using it because it makes prints quiet strong without using a crap load of infil (think using 3 lines of infil instead of one so your infil is 1.2mm thick instead of 0.4 for a standard nozzle).

@wils4219 7 месяцев назад

Infill line width? In superslicer you could put it in a % of nozzle width too

@nobodytoyou4887 7 месяцев назад

@@wils4219 Does infill width just push more plastic to make the width or does it add more infill lines? If it's the former that might run into an issue where I'm printing to fast and can't melt material fast enough, if it's the later then that's exactly what cura does and worth looking into.

@cy-one 7 месяцев назад

@@nobodytoyou4887 *"If it's the former that might run into an issue where I'm printing to fast and can't melt material fast enough,"* Probably not an issue. I'm not using Orca rn, just the base Bambu Studio, but therein the print speed is limited by the maximum flow set in the filament options. If you set that to the _actual maximum flow_ your rig can achieve, then the printing will never outpace how fast you can melt your filament.

@RaminOhebshalom 8 месяцев назад

Excellent, Please look into the Galaxy-Slicer as well

@BikZom 8 месяцев назад

sadly superslicer is no longer updated so i've been using orca for the couple of months and it's a really great slicer with frequent updates

@Jesentra 3 месяца назад

Is there a way to get those filament profiles? I was excited to pick up this slicer because I saw all the profiles in it, but it doesn't seem to come with them.

@TheOscylO 8 месяцев назад

Just testing it. What supised me was no Ender 3 profile 😮. I has some impprovements over Prusa Slicer but not fully convinced if switching is worth it.

@CC_FPV 8 месяцев назад

Great video as usual. Did you say that logging in will allow you to sync settings from one machine to another? That's not my experience today. Got it running on 2 Macs and no sign of syncing.

@briansrcadventures1316 6 месяцев назад

I'm trialling Orca compared to Cura. So far I'm liking it! Certainly seems easier to get fast and decent results in Orca compared to Cura.

@MrMiniPilote 7 месяцев назад

Does OrcaSlicer have a hole size compensation setting? I think it may be Bambu Studio but it is not in PrusaSlicer. Great video, clearly I need to check it out. I am learning PrusaSlicer since I figured it would be better for use with my MK4. Thanks for the content.

@sebastiansombra 8 месяцев назад

Is it possible to import Superslicer or Prusa Slicer settings (config)?

@StuFisher 8 месяцев назад

Thank you... It's inspired me to look at changing, but after spending hours setting up Cura Profiles... is there a way to convert .curaprofile files so they can be imported into Orca? According to a site I found, Curaprofiles are zipped inside the file, making the format incompatible with JSON (Orcaprints file type) I know I'm being lazy - but I don't really feel like manually copying 6 different profiles from Cura to Orca. Any Suggestions?

@bobbymccourt6794 2 месяца назад

Great video Mike! One question. With a sonic pad how do I connect to the printer? I tried earlier but couldn’t get it to work. I’m thinking maybe it was because I had the webpage for the pad open at the same time? Any help would be greatly appreciated 👍🏻

@georgespapillon364 4 месяца назад

Thank you for great videos ! I just installed orca Slicer on Windows for a Creality CR6 MAX. Would you have any idea why my extruder does not stop pushing filament ? It keeps forcing filament and the gear is skipping. Also, the Flow rate tests I did on my different filaments are they good values in Orca, or do I have to do new tests ? Thank you !

@JohnRuckart66 8 месяцев назад

Is there any advantage to orca slicer over bambu studio if only for bambu printers? Thanks! Great video as always!!

@garybarford6108 6 месяцев назад

Great content, how about a video on Orca slicer with a sonic pad, cheers Gary Barford

@EdgarPaulk 8 месяцев назад

if I have an anycubic vyper printer connected to the Sonic pad, do you recommend selecting the printer from the list or using the generic Kipper?

@kornephoros 8 месяцев назад

I've got a quite heavily modified ender 3 v2 Neo with klipper and octoprint installed so i liked orca slicer especially for the "Device" tab it had... but with it i encountered retraction problems that i wasn't able to fix and had to switch back to Cura :(

@duytc742 5 месяцев назад

yeah i dont known why my e3v2 moded only like cura :(

@tomfoolery4024 8 месяцев назад

Nice video! Does it work with belt printers? On a second note, you should review the Lynx Diamond 3d printer.

@B0IIE 8 месяцев назад

Is it possible to import the settings/config from prusa slicer to orca?

@matttheis3651 6 месяцев назад

So if you only have a bambu printer, the benefits would be the security stuff touched on then end of the video and and couple things in the calibration menu? Just wondering if I should make the switch.

@djispro4272 8 месяцев назад

Excellent, but can I import my PrusaSlicer profiles? I would rather not have to redo all tweaks to a new slicer since I have no idea if I will like it or not, and don’t want to waste time if I decide to go back to PrusaSlicer.

@vaughanza 4 месяца назад

Awesome please buy the developer a cup of coffee

@pennakira 7 месяцев назад

Thank you for the video, I am trying to get the time down on prints. 40 min on cura and 1 hour with Ocra. I tried to make the setting the same. but no luck, any help?

@TheRpg1964 8 месяцев назад

Go the Panthers!

@davedixon2167 7 месяцев назад

Does it work for Delta printers? I have a big delta with one nozzle and 2 extruders, and would like to see how Orca compares to Cura, but SeeMeCNC isn't listed in the profile list of manufacturers.

@fernaq7400 7 месяцев назад

I'm having trouble with the filament selection, for the K1 Max I can only choose Creality Generic PLA, ABS and PETG, and I'm unsure how to work around with the different filaments from different brands rated for quite variable recommended speeds, flow rates, etc etc

@VectorRoll 6 месяцев назад

I only have one question. How do you disable Motion Ability? In Prusa Slicer you have 3 options for Machine Limits. Emit to G-Code, Use for time estimate, and Ignore. I tend to use Ignore or Time estimate for my printers as I set all those settings up in my Firmware. But for Orca Slicer it seems to be defaulted to Emit to G-Code.

@Mr5bBaja 5 месяцев назад

Great vid as always, I've just download and trying out orca slicer, so far so good, but can you or anyone tell me how to set nozzle and bed temp? For such an advanced slicer for them to be missing is a disappointment