The BEST New 3D Printing Program! ORCA SLICER TUTORIAL

Подписаться 1,1 млн

Просмотров 89 тыс.

50% 1

Welcome to the new-new! Imagine one 3d printing slicer that could control ALL of your printers! No more switching between programs, loading profiles, etc. One Program. Multiple machines. Awesome features. No Mess!
PLUS you can link up multiple printers for easy remote printing!
If you're curious about using machines like the Creality K1/K1 MAX remotely with Orca Slicer, stay until the end of the video or check the time stamps!
Enjoy!
▼ MENTIONED IN VIDEO
Orca Slicer- www.obico.io/blog/orcaslicer/
Download - github.com/SoftFever/OrcaSlic...
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
My Etsy | www.etsy.com/shop/FranklyBuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
ELEGOO| tinyurl.com/yvf6v6cm
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
0:00- Intro
1:05 - Download/Install
2:03 - Basic Manuevers
7:40 - Advanced Settings
11:56 - Supports & Painting
16:15 - Remote Control Printers
17:07 - K1/K1 Max Linking
21:07 - Closing Thoughts
#3dprinting #tutorial #beginners

Развлечения

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 318

@Rolman3D 4 месяца назад

As someone who’s used Cura since 2020 and had to slice up my files in Meshmixer and my brothers pc sometimes crashing when cutting up files, to be able to have multiple build plates, an intuitive UI and the projects option that actually works, my jaw dropped, you have convinced me to switch from cura to orca. This will save me hours of work in slicing files especially when printing my helmet and props that sometimes have up to 70 parts, I recently printed a Halo Wars 2 M99 Stanchion sniper rifle that was 49 inches long. Oh and I forgot, having the drop down menu of all of your printers with nozzle options automatically and bed setting is a game changer because in cura my brother switched my glass bed to my magnetic bed settings and ruined both the build plate and nozzle and nozzle 0-0

@therick0996 7 месяцев назад

I love Orca Slicer. One thing that took me a few months to notice, was you can auto-arrange individual build plates by clicking the icon next to that plate, and you don't have to auto arrange everything, since that will move parts to other plates

@chico6988 3 месяца назад

Just bought my wife a Creality Ender 3 V3 KE for her birthday. I've been studying up to help her figure more out about it and ran across your channel. Thanks for breaking this stuff down to make it easier to understand! I'm subbing your channel and sending her your vids to help her out.

@Antstar12 7 месяцев назад

OrcaSlicer is great. You can hook up any Klipper firmware based printer(Neptune 4 series, Ender 3 v3 KE, Vorons, Creality K1 series, etc.) As Frank showed you just enter the IP of the device and you're good to go, the other step is getting your printer's API key, if the web interface your printer has isn't locked down you should be able to generate an API key in the settings tab/page and then enter that in the API Key field when adding your printer. Then you should be able to upload directly to the printer. Not sure the K1 series allows it as they seem to run a custom web interface but I'm sure it's in there somewhere 😅

@AndrewAHayes 6 месяцев назад

Can you use the API key of a printer that is hooked up to Octoprint to send a file from Orca?

@Antstar12 4 месяца назад

@@AndrewAHayes late reply but yes. Klipper and OctoPrint use a similar API key system. Not sure if you can start a print directly when using Orca+OctoPrint, but I know you can upload via that method.

@Phant0mwolf-Productions 7 месяцев назад

Thank You for this. I will be using this with my Neptune 3 Max. I am very appreciative of you especially as you are the one who convinced me to try out 3D printing in the first place. Thanks again and be strong

@jaysing7835 7 месяцев назад

Bro u been a life saver. I drive with your vids playing and then when I get home I hop on my slicer and stuff seem so easier to do thanks !

@max_hairloss 7 месяцев назад

This was super helpful! I've been using Orca for the past few weeks, and I pulled a few tidbits about it out of this video that'll help a lot.

@hansencustomcreations5355 7 месяцев назад

Thank you Frank for your video. I find your way of explaining and going through things is just like me. I have been thinking of switching to this program for a while just waiting for someone easy to explain it. Thanks Frank have a good holiday

@Levkin 7 месяцев назад

A very interesting setting, for instance when printing with PETG, or just when you are looking to minimise stringing, is "Avoid crossing walls". Can be useful if printing a visual piece, but struggling with too much stringing. Edit: Congrats on the 1 mil btw!

@Beakerzor 7 месяцев назад

thanks for this video! I just got my first 3d printer, (Neptune 4 Max, thanks to your review) and from Uncle Jessie's recommendation, I started with OrcaSlicer. I couldn't be more happy.

@joshuabenedict5843 5 месяцев назад

Thank you for the video, I was on the fence about changing programs, but you convinced me to make the change, especially since I just ordered my second printer. Thank you again for the video and all your other great videos!!

@acgamingpresents9070 7 месяцев назад

I got a K1 Max yesterday, and I knew I could get a little more speed out if it. This should help a lot. Thanks.

@drslimjim14 3 месяца назад

Great Video Frank! You got me into 3d printing 2 years ago and I don't regret it for even a second. I recently purchased a Neptune 4 plus for bigger prints such as helmets and props. I already downloaded Orca Slicer and it is so much better than Cura or Prusa. Thank you for the recommendation and all your helpful videos!

@gallimorerp 5 месяцев назад

This was great!!! Very detailed explanation and overview without being overcomplicated. Thanks Frank.

@Thatbrandonguy 7 месяцев назад

Thank you for this video! I’ve been trying to learn Orca and this was super helpful!

@thomaswalker9277 Месяц назад

So I just bought a used K1 a few days ago and this video really helped me get it attached to Orca. Thank you very much Frank. I'd also like to mention that you can find the IP address of the K series in Creality Cloud as well. So you don't really need their slicer software. As long as you have the app on your phone, and your printer is linked to your WiFi and the app. Everything you need is right there for Orca.

@matthewrice5721 6 месяцев назад

I just finished building my new printer yesterday, so I've decided to give Orca a whirl. This was helpful!

@chriscomer261 6 месяцев назад

I am so new to all of this 3D printing. I love watching your videos and I am eager to learn. Thanks for your honest opinion on the Orca Slicer. I am wanting to learn how to design my own ideas and be able to print them out. I cannot wait until your next video.

@pw3111 Месяц назад

Thank you, thank you. I bought an Ender3 V3 KE and wanted to use Orca Slicer wirelessly from my home computer. Spent most of the day seeing videos saying I needed Octopi, Raspberry pi etc. etc. Just tried your trick with just the IP address then Import the file and it works like a charm!!!

@_ethereal_astro 6 месяцев назад

Frank, have you thought about doing a series of how-to in depth for Bambu or Orca slicer. These top level overviews are great but going through each button. Calibrating filaments, etc..love these vids. I finally pulled the trigger and bought a X1C.

@edwinl.nievesjr.4521 7 месяцев назад

A master of his craft. Thank you as always for sharing and teaching.

@user-vl2xp8td4j 7 месяцев назад

this is such a great video to know for people especially for people like me who are getting a 3d printer for Christmas. U the man Frank 🙂

@tuerty 7 месяцев назад

If you are not good modeling or cutting STL files in other programs, like fusion 360. Orca slicer allows you to cut the print and even add connectors, so it will be easier for you the put them together later. 5:25

@Bazwelle 5 месяцев назад

Thanks for the video, I have now switched to Orca thanks to you!

@eyal_the_goat 7 месяцев назад

Let’s go bro I waited for this a very long time

@mururoa7024 7 месяцев назад

About setting the speed, don't forget to set the correct *Max Volumetric Speed* for your filament. An incorrect or too low value will lower the actual print speed, no matter how high you set it in the Speed tab.

@vikkidyer 3 месяца назад

Hi just wondering if you could tell me what the max volumetric speed setting is please. Thanks x

@Queue22 7 месяцев назад

I literally just downloaded this the other day for the multi bed feature. I wanted it to add all the project filament weight at once but didn’t know how. Thanks for the help lol

@davidtigerfan 7 месяцев назад

Frank, just as an aside, I'm 99% sure that the IP addresses of your printers are "Network Address Translation (NAT). Meaning the internal IP addresses your router assigns are generic and no one outside your house can access them.

@coolds3970 Месяц назад

Just a heads up your ip is clearly visible for a frame in the video and anyone could easily look up where you live. I did it and so many other people can so please fix the video

@TheRealPat316 10 дней назад

@@coolds3970 It doesn't matter since these are internal IP addresses, meaning unless you're connected to his network, you can't do shit with that info (heck, most people probably have devices on their home networks with the exact same IPs..... in fact, I do).

@robertweiss4171 Месяц назад

May not be relevant to many but I have just come across orca and decided to give it a go. I only have one printer, a Sovol SV02 which is controlled by Octoprint. I was able to add the printer by giving it the IP address of the Raspberry Pi and can now control my printer inside of orca rather than having to open a browser instance.

@gv100_blitz 7 месяцев назад

I was literally just thinking about getting orca- coming from Cura I’ve heard so much good stuff about orca, can’t wait to watch this !

@dustinrossi9384 3 месяца назад

Same lol

@Jasta315 7 месяцев назад

Arachne was a greek mythology figure who challenged the goddess Athena to a weaving contest. Its the spider sounding pronunciation.

@rotty281175 7 месяцев назад

Thanks Frank keep up the great work mate i look forward to your videos.

@jobranjubair2154 5 месяцев назад

Very helpful! Thank you so much! Subscribed.

@Loyalspartan3 6 месяцев назад

Thanks man saved my life showing this program when ya did ha cheers

@kylejobs-yr1df 7 месяцев назад

Loved this video. Def going to be downloading this program.

@Jside68 2 месяца назад

Rooting your Creality printer makes a lot more sense if you are using Orca Slicer. Since I rooted both my V3 KE, and use Orca, I have seen a big improvements on the print qualities. Another advantage to root is the ability to permanantly set the Z-axis offset on the printer itself. Before rooting, I had to manually adjust the z-axis in the slicer or on the printer it self before each print. Good video!

@aetherguy881 7 месяцев назад

I started with Orca, I love it so far!

@risingphoenixbronco5328 7 месяцев назад

Painting “out” supports all by itself made watching this video worth it. Thanks

@ben26480 4 месяца назад

thank you so much for this!! this is the first time tree support worked for me !!!!🤩🤩🤩

@The_saiyan_princess4 7 месяцев назад

As always Frank delivers and shows he is a boss.

@gueremangamingstuffggs7072 7 месяцев назад

I'm quite new to this, and started learning with Cura, however I feel that I'm getting much better prints and once I know somewhat my way around Orca is just better.

@amiga2091 4 месяца назад

I finally figured out block supports! Thanks!

@wilga80 4 месяца назад

I am new to 3D printing. I have a K1 and am using the Creality Slicer. Your video has encouraged me to try Orca slicer. Maybe you could do an indepth video on the calibration within Orca. I am not sure how to tune my K1 so I get the best quality print possible from it.

@Lawrence_Marks 6 месяцев назад

Man, for a second I was so excited, I thought you were going to show how to get upload to work on the K1 Max! lol I was on the edge of my seat and then you said to export and I was so sad. Thanks for the video though!

@tonsoffun49 6 месяцев назад

JFC this video helped me to much....thank you. The exclude object @19:08 is so useful, and I had no idea about it.

@RaySchrantz 7 месяцев назад

I'd love it if you could do a video on calibrating the speed of the Bambu X1C or P1S to improve print quality. This is where I've been struggling because I'm just not sure how to stabilize the print quality of my new Bambu X1C. I keep getting prints with messy outer walls. Also a video on reducing waste on multi material prints.

@wesleydutoit6901 6 месяцев назад

Hey man! I just got everything to work with printing straight up from orca with the k1 max. It works beautifully and flawlessly once rooted, just don't forget to update new ip address with the additional fluidd or mainsail number at the end :)

@colinmsmall 7 месяцев назад

I’d love to see a video on orientation with several types of model types. It’s difficult many time to figure out how to get a good print when you have models that are detailed or shaped funny with weird edges etc. Also, I would like to understand the new features in Bambu studio where you can do dovetail cuts and pin connectors etc.. I would like to understand of you can make several cuts at once in a model also.

@OldManJimmy1 5 месяцев назад

Thanks for the info, I have a X1C and some Creality printers too. I have logged into the Bambu account and can monitor as well as send files to my X1C. I have not figured out the CR-10 Smart Pro and really dislike the Creality Slicer and Cloud thus I'm using the SD card to print on those printers and know there's a way to wirelessly connect and print to these printers. If I get the Sonic Pad that would add Klipper to the CR-10s and am wondering if that would let me use the Orca slicer to connect to these printers?

@kennybulow3183 7 месяцев назад

my biggest issues started with orca slicer, ended up with moveing to mirco swiss, new bed etc :) then orca was insane! cr-10 smart. new issue arrived! supports, mostly the distance, as the buttom of the object is messy :( like your videos and guides overall! keep it up!

@kennybulow3183 7 месяцев назад

also no cr-10 smart printer selection :( hardly any old printers

@christian_U81 7 месяцев назад

Nice, Happy Christmas from Norway :)

@miguelolmo6425 Месяц назад

definitely giving it shot very cool features...adding walls for strength on sword props...very cool tip thanx man

@MrBestest 6 месяцев назад

Good video man! I didn’t even know Orca was an option for my X1C! I just downloaded it!

@bibbitz 4 месяца назад

Nice overview! Testing out the slicer now. I've been using a BeaglcCam to remote access my Ender 3 v2. I was able to connect that interface to Orca the same way you connected your K1/Max. Can't fully send files to the cam via Orca, but saving the file and using the device interface to upload the file works just the same.

@crashingsux 7 месяцев назад

I love orcaslicer, only use Prusa slicer these days for multi-material use, or more specifically, for my IDEX printer as I haven't found a way in orcaslicer to add a second extruder and set things like idle temperature.

@benleonard2144 7 месяцев назад

Side note with supports if you paint red and select auto it'll put supports everyone except where you didn't want them.

@BasemBrimo 5 месяцев назад

Always helpful videos, started using Orca recently. But still not quite figured how to work best with sonic pad and Cr-10 s pro v2

@garylester55 6 месяцев назад

Hi Frank. I just bought a Creality K1, it’s got all the problems in the first couple of releases fixed, it has a sticker on the inside bottom, giving you all the types of filaments and the settings you should be using, speed, bed temperature, nozzle temperature etc. thank you for this video 😊. Is Orca Slicer free? As Creality print doesn’t seem to allow for different types of support structures, also if I want to rotate the model with the supports, they turn off, or removed. Thank you again, have a great new year. Gary

@Sasquatch_Gaming_hi 7 месяцев назад

Good day when frankly built uploads

@SuperYanhan 7 месяцев назад

Orca is powerful and all in one !

@SxEtluv2012 7 месяцев назад

Litterly just got my neptune cus you.. and now this video comes out perfect timing.

@billcs66 Месяц назад

Just wanted to say thank you.

@kimchi4184 6 месяцев назад

@Frank is there a Z offset in orca for adjusting the bed/nozzle default as in the creality slicer for K1 max?

@marvinw.1765 7 месяцев назад

I just got my Bambu X1C yesterday as an earlier Christmas gift. I've done a TON of resin printing, but have never done FDM. From this video, i take it i can use this program with the X1C?

@totallyradbuilds4781 5 месяцев назад

Hey Frank. Thanks so much for another great video! I do have one question. I have a Creality CR-30 and for the life of me, I cannot figure out how to get that printer loaded into Orca. Have you put your Print Mill into Orca yet or are you still using Creality Slicer? If you have put it into Orca, could you point me in the right direction in figuring out how to do that? Thank you again for all you do.

@Iamtherodlight1453. 9 дней назад

Thank you.

@TheFel0x 6 месяцев назад

Unless your printers are in a completely different place and network that required you to do some really weird things and make them publically available in some way the IP adresses are almost certainly "private" IPs (starting with 192.168 typically), meaning they can only be reached from your network and give no information about or access to your network or printers whatsoever.

@blackcanyonmodelworx6060 7 месяцев назад

Hi Frank, any idea if I can use orca to remote send files if I am using a BTT Pad7 with klipper? I have 3 of my Nep3 Pros hooked to the BTT Pad7 and would be nice if I can do it right through orca. Thanks

@DrexProjects 4 месяца назад

You don't need to blur your internal network IP's. The Modem IP address is the one you need to blur. And I bet 98 % of people don't know where to find this. Maybe 80%. But I will try Orca Slicer, because I trust you.

@adamrosenhamer3762 6 месяцев назад

def need more info on getting the k1 to print directly. sounds like that api key is the ticket. changing nothing but the slicer alone gave me better results on my k1. very new to 3dp still so learning as i go!

@peterstoltz3296 5 месяцев назад

Great information video!!my question is this orca slicer good for me a beginner and my ender 3 v3 se printer???

@Tyguy266 6 месяцев назад

I was able to download my timelapse on the K1 max through Orca. think they might have fixed it. also very easy on the android app. Wondering if you know where or know anyone that could make a rear fan cover for the inside rear vent on the K1 Max? Happy new year, much love from my family to yours. Thanks for all you do

@dirty_curty8611 6 месяцев назад

just got the k1 max and could use some help with more detailed settings if you dont mind. im coming from the cr10s so this is a huge upgrade and i prefer orca over creality but the settings seem incorrect in orca for sure. Love the work you're doing thanks.

@JaXxX410 7 месяцев назад

I’ve been using orca to slice and then uploading to Creality Print to send remotely. Might be able to give that thing the boot. Is there anywhere that people can upload printer profiles they’ve made on their own? Trying to get some CR10 V3s going. Last time I checked only the V2 was on there.

@IndigenousCreatures-3DPrintz 6 месяцев назад

I just recently got a ender 3 v3 se do you know if Orca has a profile for that printer? I can't seem to find it.

@RDUBTutorial 4 месяца назад

great video...i am using 2.0 beta and do not see the combination infil within the advanced strength area. Any idea why? Also would love to see another video dealing with custom speed settings cus wow there are a lot of options in there. I have a Neptune Max 3 and would really like to optimize my speed settings where i can cus it doesnt print as fast as the newer MAX 4. So maybe its a double special video for Orca and Elegoo Max 3"s. I will subscribe in the hopes of seeing that video sometime soon-ish. Keep on keepin' on!

@jonogunn 6 месяцев назад

is the"exclude object" feature only for non-bambulab printers? i have an X!C and using orca and I don't have that feature

@EtDracul 7 месяцев назад

buenisimo video!!!!

@P1X3LAB 7 месяцев назад

I downloaded orca and added my K1 and I love how much more control and options it has! However, how do I know what the speed presets and all that should be? K1 is my very first printer a month ago

@creativecompositions3747 6 месяцев назад

Frank, any chance you could share your neptune 3 max profile settings? I've noticed the orca default is 2x to 3x slower than cura.

@drobinson4545 6 месяцев назад

Thank you. My son and I are going to start a side hustle to cover our hobie and tax write offs. I plan on upgrading our Creality Ender 3 pro to a Bambu Labs X1C. And I hate Crua and Creality. Lol. Tired of bed leveling/ updating/ readjusting shit after 5 prints.

@bvvillz1 7 месяцев назад

Been loving Orca Slicer, only thing I haven't figured out is how to measure dimensions of prints. Prusa Slicer has a really good measuring tool, haven't found it in Orca though.

@gueremangamingstuffggs7072 7 месяцев назад

Will be added on the next release or just download the nightly build

@Tig217 7 месяцев назад

Can you please tell me what I should do when I have an ELEGOO Neptune 4 plus?(non Print Profile)

@garyjackson5659 6 месяцев назад

Frank I see you have a lot of K1 Max's I've heard of issues with nozzles clogging any tips if I were to get one? Need a bigger form factor because I have a big head for helmets 😂

@AndrewAHayes 6 месяцев назад

I recently bought an X1C and AMS and started to learn Orca after being a Cura user for Donkey's years, in Cura I auto supported any overhang above 57 degrees, Orca does not work the same, can you explain in easy terms how this works in Orca please Frank? and what the setting number would be for the same angle in Orca?

@ScienceMinute42 7 месяцев назад

I would like to try this slicer, but there is no profile for the new ender 3 v3 se. New to all this, but have learned a lot so far. I figured out creality slicer, cura slicer, i just found a profile for prusa slicer; liking it best so far. I will keep waiting i guess.

@davyw2278 2 месяца назад

Other then K1 are you running any other creality printers with klipper on orca? Iv got the cr10 smart pro what doesn't have a profile so really struggling setting up for klipper (I used the base of ender 3 s1 pro before I changed to klipper) If you have sonic pad or klipper printers and do a quick video on setting up the profiles

@almonster2066 7 месяцев назад

I was a fan of Superslicer but due to chronic instability issues, I no longer use it. Orca is the way to go. I also got rid of Prusa Slicer and CURA.

@tinymito 5 месяцев назад

Been using Bambu Studio for 2.5 months, soon I land on P1S manual calibration was painful since it save Factor K on AMS instead of filament like OrcaSlicer done. I'm not going back after using OrcaSlicer, it makes more sense per filament instead of per printer / AMS setting.

@vernonzehr 6 месяцев назад

I see a ton of videos from people who have a bunch of printers from different companies. I can't afford that so planning to get my first one. I am STRONGLY leaning towards a Bamboo. It sounds like the perfect "first" printer for someone like me. It appears to just "work" right out of the box without a lot of fiddling. Since this Orca slicer appears to be the same as what comes with a Bamboo printer am I making the right decision?

@ruellerz 6 месяцев назад

Solid. I saw the supports in creality and was disgusted but remembered this video. tree , exported gcode, k1 max is printing..lets see how it goes!

@threnn9509 6 месяцев назад

Does it offer any major benefit over the prusa slicer other than the multiple build plates?

@1048matt 7 месяцев назад

Great video as always, been trying Orca slicer myself now, seems really good!! Although, is there a way to use TPU as the print material?

@FranklyBuilt 7 месяцев назад

Yeah. TPU is a print material. Just select the right filament

@luisarevalo4645 7 месяцев назад

I got a Neptune 3plus. And I still can't narrow down the print speeds just yet. It is still so much slower than in ultimaker cura, but I think since I have only the one printer, I'll keep with cura until I get it down, or I get a second one

@thomasdebakker7458 6 месяцев назад

Hey Frank have you ever tried fiberlogy PLA for any of your props and cosplay?

@Diemera373 6 месяцев назад

Hey Frank, do you know when they gonna add a profile for the Creality CR-M4? Or do you have a custom profile to used Orca Slicer?

@FranklyBuilt 6 месяцев назад

Just use the cr-10 max profile

@Diemera373 6 месяцев назад

Is that what you used? Do you get any type of strings on prints?.

@Phelnok 4 месяца назад

how do you get device to show mainsail instead of creality print? also how do i get the creality cr-10 se settings for orca slicer?

@travisnickell1584 20 дней назад

Since you are the only one showing these things while using the same printer, I have a question. I’m using the k1 max with orca. I am not using multiple filaments on 1 print, but how do you change filaments in orca if I start using a different brand than Creality? The drop down only has Creality. I tried adding a new one but it didn’t seem to want to work so I’m a little lost. I’m trying not to mess up the settings I have. Most of the videos I found are how to set up points for switching colors mid print. Not how to use a different brand and have its settings automatically load in to your current printer. I only have 1 k1 max

@nhahtrebor91 3 месяца назад

Also in Orca there's a G-Code limiter! Took me forever to find out why my prints were going so slow. Printer settings -> Motion ability -> Advanced -> Emit limits to G-code.

@dragonshr280 4 месяца назад

hey frank i was looking for a video on how to learn everything in here. you have the best i seen so far. there is some parts i would like some info on. that would be the editing presets the button next to your connect internet button . in there you see basic info gcode multilateral extruder.