Order of Operations 

Greg, again your integrity and perseverence for righteousness in all things comes out in your teaching. We can see Him living through you in your actions and devotion to your craft.

Thank you Mr. Dykstra. I appreciate the tutorial. To worry seems to be human nature. Scripture often enough gives us guidance on the subject. My go to is Phillippians 4:6-7 Be anxious for nothing, but in everything by prayer and supplication, with thanksgiving, let your requests be made known to God; And the peace of God, which surpasses all understanding, will guard your hearts and minds through Christ Jesus.

I would very much appreciate a video from you stating your order of steps for loading apex level ammunition. Thanks, Greg, in advance ❤

I needed this message today brother. Thanks for all you do and for living your calling

Hello Greg, ive started watching your video's and have enjoyed your process and knowledge in the field of handloading, you seem to have a nice setup, and for the most you are spot on in your knowledge, and im glad to know you have a good relationship with GOD , my name is Greg also and i reload myself, and im getting a ton of gtlreat information with your videos, i really appreciate you brother, and may God bless you also like he blesses me everyday, ive been thru a kind of rough past, and im glad i chose Jesus as my savior , i love the fact that you opened yourself up as a child of God.👍✌️🙏

Man I absolutely love all the gadgets and tools for everything reloading. Great job

Wow! I liked the technical content, but I LOVED the spiritual part! Well done, many thanks, I hope your message goes far and wide, and I will share it!

I love all your videos, I know u get hate from people, but I get your passion. I am not even close as a shooter on your level, but I do load the best ammo I can, and as I can afford I get better equipment. You have shared so much knowledge and I hope you know there are people out here that do appreciate you sir.

I love learning about reloading and how you incorporate scriptures in your video is really nice to hear. Just subscribed

I loved this video. Totally the applications in actual practice and the shot group results; followed by giving us perspective. Then, your inspirational message just encouraged and made me (can't speak for anyone else) feel good. I'm glad I know you.....JJ

Was pretty impressive watching you run your bolt back and catch the brass , then load the next round so smoothly

Greg, just wanted to tell you that I have been following your great videos and with incorporating your techniques into my process and today I was able with my new 6.5 Creedmoor to put 7 shots under 1/2” at 300 yards. I was using Alpla SRP brass, CCI magnum primers, H4350, Berger 140 gr. Hybrid Target with an expanding mandrel .003 over and seated with a K&M Arber press. Average Velocity 2708 with an SD of 3.6 Thanks again, Tom

Thanks for reminding me of the self help guide to life. Oh and the hand loading guide too!

Best video I’ve watched today….. God bless Greg!

Your process is neat to watch. Thank you. I would love to see your process vs the MOST basic process (no annealing, no case cleaning, no primer pocket cleaning...just de-cap, resize, powder drop or scope (beam scale) and stand ram seating (rockchucker or equivalent)..then shoot bith batches on paper with Garmin set up and show results and data.. God bless

Great video! I guess i figured this was your process from watching all your videos, but nice to see it A-Z in order. PLEASE do the Apex-Level video also!!

Thank you for everything you do sir love the videos they are so helpful and especially the positive words at the end! ✝️

Greg, good job. Simple and informational. I would like to see more content on looking for smaller groups

I love it! Confirmation of our salvation! Pastor spoke on Joshua 1:9 today! Praise the Lord love the channel.

This is a great video that outlines processes and procedures. And tying it in to Joshua was a great segue. The gospel is an amazing guide to help in every facet of our life. Yes including this.

Thank you for the message today Greg I needed to hear that.

Greg this was a great video I think I will revamp my process of handloading to your order. I have the hydraulic arbor press with dial but it looks like I need an AMP press. Thanks for the info.

The "don't worry" phrase is actually repeated 137 times in the catholic Bible. Thank you for showing us your way of processing brass.

Thank you Greg! It looks awesome and amazing!

Thanks for the video, Greg. God Bless.

Thank you for the lessons. These are great foundations to build on!

Thanks for taking the time to put this information out.

THANK YOU FOR SHARING YOUR KNOWLEDGE!!🙂

Ah... I was hoping we get this video. We must get the second one with all the steps to get the smallest groups, please. Thanks for the powerful message at the end. Amen Brother.

Thanks for the video, the message at the end is what I needed to hear today!

Great video, and timely for me. Even answered a couple of minor questions about operations I had. 👍

Man I love your videos and how you put God first!!! I’ve learned a lot about reloading and mostly God! Keep up the great channel and content!!!

A reloading process tier rank would be cool. Ive got a decent handle on whats important in my process, but for an intermediate reloader that wants to up his game, it would be very handy to know where to spend the money next. When it comes to the call of perfection, its important to realize that the law, even as its given in the sermon on the mount, serves to condemn the sinner (all of us). Our perfection is only found in Christ. Not of ourselves.

I like your idea on a video towards process modification vs different goals. Cool.

Thanks Greg. I enjoyed the video a lot. I would be interested in the "apex level" video as well for my match rifle. Where did you find those little timers for your tumblers? I need a couple of those. Take care and God bless.

Excellent video Greg. Thank you!

I would love if you did a video on your apex loading procedure. Keep us posted.

What is the purpose of using dryer sheets in the tumbler? By the way, the bolt thumb flick and brass catch might be the slickest thing I've seen lately. Lol.

Just a quick question . What is the purpose of the dryer sheets? What is the benefit of neck brushing with lube? Thanks so much for your knowledge.

Thanks Greg! Phil. 4: 6-7

Folks that are not sure Greg has hit the mark with his teachings of Christ. I can say the more you apply your self like you do with reloading the more God shows an blesses us in his time. He is watching over his living words waiting to apply them to us that try or practice it.. Hebrews 4;12.. For the word of God is "living" and powerful sharper then any two edge sword piercing to the division of the soul and spirit, and joints and marrow an is a discernerof the thoughts and intents of the heart.

Gosh, this video was so positive and inspirational. Thank you

I was going to ask if bullets from the Bible was going to come back at some point. That answers that. I appreciate the message, Greg.

Dude you are good! Thank you

Amazing video!! I’m SUPER surprised you’re not using the AMP annealer 😮. I wish you would do a video and do a walk around your whole setup and show us your equipment!! Thanks Greg 🙏🙏. God bless you 👍

Greg, thanks for the great video showing your equipment. Can you tell me what media you use in your tumbler? Thanks much and God bless...

As someone new to reloading, these process/checklist videos are awesome! One quick question on the dryer sheet idea. I was ready to just grab some sheets from our laundry room until I read that "Dryers sheets vary quite a bit from one product to another. Some use clay as the primary additive, others use fatty acids and some use quaternary ammonium salts." Bottom line, apparently some dryer sheets can leave a residue on the brass? So, any recommendations on which brand or type of dryer sheets to use? Thanks

First of all... love your content. Please keep at posting this awesome content ...... Question that i cant get my head around... when you done full sizing and then cleaning and running through all the steps before you start loading primers, powder and bullets is there no way that the necks can bend a little and not keep its perfect shape that the mandrel gives it? Because those cases are tumbling and falling etc.

Great as always

The newbies thank you.

thanks for video

I looked thru the comments but couldnt find the question and answer. Here goes. Whats with the drier sheets?

In most of your videos you preach reproducibility, but I have not heard you talk about the differences between a flame and an induction annealer (such as the AMP) when it comes to producing the same results over and over again. What is your take on this @primalrights? I can see a lot more factors that you would need to control when flame annealing vs when using an AMP annealer. Love your videos Greg and especially this one.

Appreciate the video, very well put together. You shoot a lot, what is your ear protection recommendation. ? Cheers Tim

Keep running the race set before you brother

Great video as alway Greg! What jaws do you have in your vice?

I see it’s a hydraulic arbor press. But where can I get one? I checked primalrights site. I need one. I hope it don’t cost as much as the Prometheus scale.

Love the video, I have a bench source annealer, but have been thinking of buying the amp annealer, what is your thoughts on the amp annealer ?

Thanks for the content. Do you mind sharing which torch nozzle you’re using?

Man! I'm just getting into reloading and went with a vibratory tumbler and rice based on an article from you using a specific rice. I see this video and you're tumbling with a different media. Great video still and great information as always. Just curious how you identify which situation calls for rice or otherwise.

@primalrights what is the tool holding the bolt while removing the roll pin? Where do I get one? Thanks

Did you clean your rifle chamber before you checked headspace?

Greg, I have been reloading for about 10 years now, and I still am learning from you. Thanks for what you do. Quick question that I really have never heard a definitive answer to anywhere. If your brass length is within the general Sammi Spec length, would you trim all your brass to the same general length for best consistency or would you just load them even if they varied in length by say .005"? I don't know if a variance of .005" in length makes a difference in neck tension and accuracy or not. Thus, I always trim to get my cases within +/- .001". Am I wasting my time or is this good practice for consistency?

I saw and understood the universal decapping die step for the few cases, but do you use a decapping mandrel for the rest of your cases or keep the decapping and mandrel/sizing operations separate?

What are your expectations for extreme spread and standard deviation?

Asking due to a lack of experience, but when checking the brass right at the beginning why do you completely disassemble the bolt to work with it?

Do you always flame anneal instead of amp? Do you use both? When, where and why?

Can I test headspace the same way you do with a bolt rifle with aAR15/AR10? Does it really matter as much since the gun is slamming them into the chamber anyways

Gregg one thing I'm noticing with both your videos and Keith over at Winning In The Wind, is not cleaning brass before annealing and sizing. Conventionally we're taught to clean our brass before lubing and sizing. This is obviously not the case with shooters like yoursef, Keith and others. Is the carbon on the neck a non-issue for the sizing operation? I shoot and load 308 for nothing more than what I'd call long range plinking. But I am always trying to improve my loading operations without adding too much cost or complexity, within reason. Would I be better served just leaving the powder fouling on the necks until post-sizing tumbling?

What primer pocket tool were you using?

What and where did you get that pneumatic arbor press? 😮

Why the undersized bore mop? Thanks

What bolt disassembly block is that?

What media separator do you use?

What round is that? Im not familiar with it...

Could you tell me what torch head you are using on the Bench Source annealer?

can you use dry media in a rotary tumbler?

Why the dryer sheet

What size punch to remove the pin for the extractor?

Is the wrench for the SAC modular die essential or i can live without it? I just bought my very first SAC die yesterday and they were out of stock :(

Greg, what unit did you use on top of the hopper to filter out the rice? I have the same tumbler.

What kind of media do you use?

8:34 what tumbling media are you using?

After lubricating the inside of the necks with Imperial Wax, do you have any issues with powder sticking to the inside of the necks after the powder drop? Does the act of seating the bullet clear the powder?

why don't you just measure 3-5 brass and subtract 2-3 thousands from that?

✝️✝️✝️

Who’s ejector removal tool is that?

👍

👍-👍-👍....👍👍👍👍

Love the shooting content, could have done without the sermon at the end

What media separator do you use?