They're also 100% made in the good ol US of A! They're up there in Maine with Looms making the fabric and everything. Amazing stuff they're doing. Supporting American manufacturing. Those guys train Jiu Jitsu and put a ton of heart and soul into their products. Love the review! I just ordered the black one last night and super excited for it to come in! Thanks for the info on it.
Thanks for the Review! You can Trim those longer threads. Its the end of the Lock Stitch so it wont come undone. It feels lighter because its not 100% cotton like every Gi on the market. We spent years working with different Yarns to engineer our own Proprietary performance Origin PolySynth yarn. Its stronger then cotton Gi's yet Lighter. Again thanks for the review.
I have the same gi arriving tomorrow, excited to try it out! You mentioned a couple times that it doesn't feel "substantial", but isn't that sort of what they were going for? They are hyping up how it's stronger and lighter, blah blah marketing. Great review!
Exactly! I’ve been in the game for 14 years and the ‘lighter’ hasn’t always meant stronger, but I believe these guys figured it out. I love this gi so far.
Hey just wanted to give a tip on keeping the drawstring pants tied while rolling. Instead of tying them directly under your belly button, offset all the way to the loop near either hip. Now tie your knot with that loop in the middle of the square knot youll make. Itll never come undone. Its even a bit difficult to untie after class. Thanks for the review of this origin gi. I might wcoop one.
For pants do you order your normal pants size or do you measure your waist? Most pants sizes IME fit different than an actual waist measurement, i.e. if I measure my waist it's 36-37" however size 34 pants almost always fit me, and 36 are way too big. I don't know if that's clothing makers flattering their customers or if I don't understand how to measure or what, but this has always been the case IME. I’m confused by their sizing chart too, which says I’m an A3 the only other A3 gi I own is too big for me. I am 5'10 ~190.
For me it was normal waist size but to be honest, they’re a tiny bit snug. That said, my wife says I have a dump truck back there. A2 fits me really well but my buddy picked up an A3 and had to get the sleeves tailored. I’m short and stout like a tree stump, so I probably have very different sizing issues from you.
I've been wearing them since 2013. I'm going to order another right now. A lot more affordable then they used to be. But even the high end are worth every cent.
Thanks for the review! You might have been better served with an A1 top based on your preference. Maybe when their Raptor comes out? 😊 Maybe you can reach out and ask about shrink rate on their upcoming Raptor in case you decide to try out an A1? My Nano in white is coming in soon! Already have the original DEF and 10th Aniversary Axiom both A2 in black. Im also 5'8" and hovering around 170 lbs (for those curious). I feel like even I could have gone with an A1 jacket at times. I just think of my GIs like cars/trucks. Choose from your garage based on ride height, suspension, tires depending on the route/journey to the destination. If I'm feeling sporty, I'll wear something fitted, close to the shorter end of the range (A1/A1L/A2 shrunken depending on brands). If I'm feeling adventurous, I'll wear something heavier and closer to the longer end (A1H/A2S/A2).
@@Jiujitsu.pilgrim oh how are you enjoying your gi since your review? I do plan on purchasing a few of their jeans and pairing it with a Raptor weave gi when it comes out so I only pay for shipping once.
@@Jiujitsu.pilgrim I just got mine today and I see what you mean. It's made up of different material compared to my previous Def and Axiom. I have yet to wear it but compared to the original DEF, Comp and Axiom, this new one seems like it has a tighter weave to it. I'll read the details of the upcoming Raptor weave to make sure it's just the weave that changed and not so much the materials used.
Can we see you comparing this fit with other gis you have? I am big fan of Tatami and Shoyoroll gis. Would be awesome to see you comparing the fit between Origin and Shoyoroll/Tatami. I am super close ordering Tatami black label Gi but might consider Origin.
Looking at this same gi. Being 6’ 1” 195, I usually wear 34x32 pants. I can’t figure out whether to do the standard length inseam (28”, 5’9”-6’) or the long (30” 6’1”-6’3”). Gotta hate being between sizes a bit. I’ve seen a lot of photos of these pants right on people’s heels or even touching the floor as opposed to being at the ankle or maybe a hair above like typical gi fit. Any recommendations after your experience? I hear these can’t really be shrunk much.
I’m 5’6 and picked the 26 in seam that’s supposed to go up to 5’9 and they are right at my heals. I think you want the standard. Let me know how it works out.
@@irvinjocelyn6524 2 inches can make a big difference though. I'm just slightly over 6' but I still can't decide if I should get the 28" or 30" inseam. I can't stand when pants are too long that my heel catches on it.
I usually wear an A1L and like a fitted gi. I don't want the jacket to be too bulky. I emailed them, and they sent the measurements for their A1 and A2. After measuring myself, it appears an A1 will fit me. I'm going to bit the bullet and place an order tomorrow when they release the new gi and FLX pants
@Jiujitsu.pilgrim the new one comes out Friday, July 21st. I think it's a whiteout and blackout theme with the Axiom weave and the FLX Pro pants. They'll send you the exact measurements for the sizes, and if there's no shrinkage, it is possible to make a solid purchase
Much appreciated brother. Do they have a newsletter you’re on or something? I’ve been on their site a lot recently and haven’t seen this update. I could just be a jackass.
Black belt here; great review bro. I love Origin for the same reasons you said. Although, I do just order the basic pants because I don't like the pro pants. I would say the biggest issue is getting IBJJF to allow us to compete in Origin gis. I've had to change my gi several times in competition because of some "issue" with origins "weave" etc.
Which organizations make you do that? I feel like ibjjf intentionally blocks Origin in an attempt to slow their growth. I competed in March at a JJWL and saw several guys wearing Origin - I’m hoping that’s a sign of progress.
@@jamesalafayette8255 If I were to comment on a type of Stethoscope. I might provide more insight to the reader if I mentioned I was a M.D./D.O/Physician. Don't you think? This is why I prefaced my comment with my belt rank. I could go one further and provide my IBJJF competitor I.D. number, but I thought that was a little douchie.
@@tinoslaponi8514 I don’t know man. Still sounds kinda douchie. Probably more relevant to say how long you had the gis for or any specifics pros and cons of them. I don’t give one crap what belt you are…
I'm 5'7" 170lbs, by Origin's size chart I should be an A2. I initially got A2 that fit a little loose like in your case. I've bought an A1 and it fits perfect. I wear A1 in other brands too so it makes sense.
Nothing has worked for me to shrink it. Let me know if you find a way to pull it off. You and I are basically the same height and weight, so keep me posted on your progress.
I have 4 Origin Gis (2 Path and 2 Rift) with a DEF on the way. All my sleeves seem right on, maybe a tad short. You have to remember, these are hand made. I wear A3
@@drew5160 sleeves might be a bit short. I’m 5ft 10 215 and the A3 is great fit. They maybe able to offer you a custom sleeve length also if you contact them. And the pants are ordered with waist and inseam specific.
Okay hold on here, not even two minutes in but i need to clear something. Part of the reason it costs so much is because its 100% American made. Its all sourced here in the USA. Not mentioning that as part of the reason for its price almost feels insulting. Edit: you did 'briefly' mention it at the end. Not trying to be rude or anything, its just one of my favorite things about the company.
18 years training and never had an issue with the draw string on the pants. Just tie a knot. I can’t think of any top competitors that have a buckle on their Gi pants.
I wish Origin has long sizes...... at 6-2 if I buy a regular size and wash it, it will be too short. Only a few companies make a long size. I wish Origin did.....
They do offer long sizes (but only in certain models... the Path gi has long sizing available)... I got my first one right when the company was founded because they were the only company I could find that made long sizes (I'm 6'5 - 200lbs). I wear the A3L(long) jacket and the 30inch LONG pants.
