Our CNC Plasma Cutter Can Scan Objects??

Подписаться 60 тыс.

Просмотров 13 тыс.

50% 1

PATREON: / liftarcstudios
STORE: liftarcstudios.myshopify.com/
We haven't yet fully explored the capabilities of our ShopSabre CNC Plasma Cutter... until NOW! Thanks to the help of ShopSabre's legendary customer service, we now have the ability to draw and label parts as well as use the probe attachment to scan them. We're still blown away by how many cool things this table can do, and are figuring out new uses for it every day.
If anyone reads this whole description type: "Giovanni is da best"
Check out ShopSabre: www.shopsabre.com/
ShopSabre's Pen Marking Tool: www.shopsabre.com/product/mar...
The Probe can be found here: www.shopsabre.com/cnc-plasmas...
Chapters:
00:00 Intro
02:08 First Attempt
04:49 Second Attempt
06:48 Third Attempt
10:04 Fourth and Final Attempt
10:45 Pen Marking Setup
13:27 The Pen Tool Works
14:10 Setting up the Probe
20:23 The Probe Working
23:19 Final Thoughts
24:44 Using the Pen to make designs
Thanks for watching!
To inquire about a custom build we can help you bring to life, or to be a sponsor of the channel, shoot Tay an email at: Tay@liftarcstudios.com
Produced & Hosted by: Tay Whiteside
Filmed by: Tay Whiteside and Walker Hooper
Featuring: Aaron Dykstra, and Spike Geffert
Edited by: Walker Hooper
Music Licensed from Artlist.io
Be sure to follow Lift Arc Studios on Instagram and Facebook!
@liftarcstudios
Liftarcstudios.com
Any technique or methodology shown in this video is purely for entertainment and informational purposes only. Lift Arc Studios and their associated craftsmen are not liable for any injury or damage to your shop or surrounding areas you man incur while trying to emulate these builds. Remember, be safe, have fun, work smart!

Хобби

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@hunterrick4 9 месяцев назад

This remimds me of my time as a maintenance lead at a aerospace machine shop. The customer service makes the machines value go way up. Haas has some of the best customer service I've seen and okuma was not to bad, SNK was a whole different story.

@WmSrite-pi8ck 9 месяцев назад

Love watching Tay talk to customer service for 20 minutes

@Kawika88 9 месяцев назад

Tay slays it again. A maestro of machines!

@serennosquadcast8297 9 месяцев назад

Cox network in Roanoke is the worst! lol great video guys.

@reagennatho3067 9 месяцев назад

Giovanni is my favorite shopsabre tech!

@t3ck3r 9 месяцев назад

That was a very enjoyable video 😊. Thank you see you soon ☺

@johngraziano451 9 месяцев назад

wow that's pretty cool I got to put this shop Sabre CNC Plasma cutter Onto my Bucket list for my future need down the road can wait to see more video of the next step soon i hope LOL

@theatomproject007 9 месяцев назад

Another really cool attachment for some of the more rigid plasma cutters is a drag scribe. I really don't see the practical benefit for the probe with a CNC Plasma cutter, but it's still cool. Ideally ShopSabre would integrate a camera to do the same thing and then it could follow an edge or line. (I understand that some DIY CNC controllers have a plugin that does this) That way you could place a drawing or previously cut part on the table and use the camera to capture the outline. Though I suspect that there is some type of manual mode for the probe that you could use to at least translate individual points into a CAD file. At least then you could find edges, holes and other features you need to identify to then use to complete a drawing in a CAD program. One of the real advantages of Servo motors on a CNC is the ability to get accurate position information to do cool stuff like this.

@greekgods3399 9 месяцев назад

love it

@motivatedpeon 9 месяцев назад

Maybe one could make a spring loaded sharpie holder, so that it would compensate for any wobbliness on the surface and maintain a little pressure like you would do when marking things by hand. Back then when I was in the labelling business, we had ink jet printers, that would move on a gantry to mark stuff like big boxes. They were wicked expensive also...

@markpinkstaff2287 9 месяцев назад

Let’s see a test of how far a Sharpie draws compared to a Milwaukee inkzall. I will only use the inkzalls in my shop now…..

@Kami8705 9 месяцев назад

And how detailed of an image it will draw. I want portraits of the entire crew

@LiftArcStudios 9 месяцев назад

Already had a thought about using the marker tool to create some art pieces 😂 Maybe a future video! - Walker

@jwm1222 9 месяцев назад

Hehehehe...you said probe...hahahaha😅

@Gergith 9 месяцев назад

Really cool to watch!! :D You now can mass-replicate/forge autographs! :D Also unexpected Walker is always fun :D 3:00

@jayknot6684 9 месяцев назад

"Giovanni is da best"

@mrdddeeezzzweldor5039 9 месяцев назад

That probe sensed part - digitized rendering (green line quickly shown on pc screen) seemed to have some corner/edge features not evident on the square cornered target piece (disregard where probe touched right on corner, resulting in 45 deg.). Maybe that was corrected with smaller sense resolution?

@FrankRuiz66 9 месяцев назад

Wow.. I'm in Super Rural West Tennessee and I have Fiber Optic. Cox sucks EVERYWHERE.. If I didn't have TEC For my internet I'd probably have to go with a SpaceX Star Link system

@javieraviles6314 9 месяцев назад

Hello nerds . 😊

@tlgx884 9 месяцев назад

Hello nerd

@blahfnblahfnblah 9 месяцев назад

Hello nerd.

@hunterrick4 9 месяцев назад

Halo nards

@LiftArcStudios 9 месяцев назад

Love seeing our fellow nerds here

@TERRYB0688 9 месяцев назад

Wow interesting video but you need to get a better broadband supplier

@LiftArcStudios 9 месяцев назад

No kidding. Unfortunately we only have one choice here at the shop and it's Cox... although we recently upgraded our internet speed, and it's been much better

@davidgiesfeldt6650 9 месяцев назад

Magnetic plate to hold the piece? Not sure if it would affect the probe… may need to be non ferrous… given the half the height for Z, you could create a position fixture similar to the welding table… very expensive x-y pen plotter 😅