Our LS Swapped Supercharged Blazer Hits the Dyno!!! It Made INSANE Torque Numbers!!!! 

He definitely deserves a pat on the back. He is an over shadowed member of the team, lets go zach!!

i hop they pay him good

Zack is bad mfr on his fabrication. I know Cleeter takes care of his team. He isn't greedy.

@@xaviergomez9989 I’m sure he gets paid more than enough. I guarantee it’s 100k +. Which he absolutely deserves!!

I personally think Tye is the MVP in the shop…dude is a top tier fabricator. Cleet has definitely put together a awesome group of guys

They can’t run their classes with a wheelie bar

​@@myprofilenameisreallylongl5956 they can, but Kevin from KSR explained that with radial tires, the minute the wheelie bars hit the radial tire unloads and spins so it is worthless. The slicks are forgivingwith wheelie bars. Thats why they try to keep the wheels down. If you put slicks and a wheelie bar on mullet , it would runs 6s all the time, but that is not what the car was built to do. Its a radial tire car.

He crashed it again

@@jasongoldsack8968 well explained. Thank you.

@@Yz4Life indeed, i didn't know that eather!

Already ran off the end of the track cause the break pedal broke or something lol

@@CotyD huh

It's got the Blake's bread

@@CotyD I don't think It ran off the track the pic he posted kinda just looked like the side of the road if it was the end of the track it would've been sand

You called it😅😂

Definitely had a 🤖 Danger Will Robinson‼️moment.

It will be a kick ass poster tho 😂

@@cbcalhoun Buy and Hold (DRS)

@@dirtbikemike7815 do you wanna sell tshirts? Because that’s how you sell tshirts.

I don't blame him. That thing is going to be flat scary to drive, it's got gobs of torque, and it's going to be twisting while trying to wheelie...not to mention that he doesn't have the most stellar record of automotive experiences.

He going to mount a wild stallion. I hope it won’t try to kill him, this is serious power, no room for mistakes!

its going to need a wheeliebar for sure. if it popped wheelies before then its going to need everything it can get to just stay down

I actually don’t know where George came from before. But I can tell he’s a PERFECT fit here. Love these dudes

@@wword boosted boys i think?

@@wword He worked at cleetus's old shop but not for cleetus. I think the channel was called fasterproms.

@@13bro45 ohhhkayyyy gotcha gotcha

@@13bro45 yup. Jeremy wouldn't even HAVE a RU-vid channel if it wasn't for Cleetus. I've completely stopped watching due to how he handled George. He wanted to focus on his existing business, instead of attracting new customers. Welp, I'm pretty sure that was the wrong decision. Not only did he lose a lot of eyes on his business (doing crappy tunes), but he lost easily one of his best employees in George, who now drives almost 2 hours everyday to work.

He'll crash it.

What in the world GOLLY

literally just needs a height sensor like kyle with his mr2 and maybe a bit of weight on the front

@@Ultra77737 lmaoo

Wheel height sensor only works if they keep it on.

Thats abit insulting to the rest of the team. One without the other is useless. Tye is a fantastic fabricator and just one of the cogs in the wheel

It’s a team homie they all play they’re own part

Good thing he is humble. What the others don’t know they will more then likely get a chance to learn.

I enjoy watching him fabricate things. And the rest of the guys also. Dang good bunch of guys ya got there, Cleet.

No. There is not a single best person. They are a team period.

My thoughts too that's a lot of power hope he's ready cause he ain't scared of a wheelie

Have I missed it they are building a fox body?

Why did he lose his former job with John

@@pob000 vp

Vvvbbbv you v

He went on rocky mtn raceweek and fasterproms told him he couldn't take the time off because they were busy. There's a video about it on the fasterproms channel.

@@pob000 John? He was at fasterproms, was spending to much time with cleetus on his channel, cleetus took George on this same race week last year and fasterproms took offense to it, got super jealous and fired George. Cleetus hired him and one year later (I think 1 year) George has become a huge part of the channel, just look at the blazer! Faster proms shot themselves in the foot. Even their video views have dropped drastically and the quality of the content just isn't there

Time for Ruby to get a big block??

@@lateagain7116 nop, for what i seen the last videos, she dint have the rear end hooked up. i assume that they dint had time to put it together or trans shop dint finished the tuneup for it

@@lateagain7116 The aluminum LS is still going strong, but it's only a matter of time before they send it on the boost controller and blow the gaskets out of it. Then they talked about putting the aluminum rod LSX out of Mullet into Ruby.

I think with Ruby being like 1klb lighter than Mullet, you are exactly right; the car won't kill the engine, but the boys sure will.

@@Mis73rRand0m lol mullet doesn't weight almost 5000lbs.... a base model c6 vette is 3400lbs stock. add giant turbo, all the cage/tubing, lines, cable, water etc, probably a 3600lb car, basically same if not heavier than mullet.

...That'swhatshesaid

Wow.... intelligence level 💯

I mean @zipties and bias plies could

considering it is an LS afterall I would just swap intake manifold between driving and racing.. I guess it doesn't matter if you have unlimited money when you ruin the blower

What they need to do is have a set up like the OG shit box of doom had. They had a burst panel, remove the panel and put a TB there below the blower for street drives

I won't be surprised if it damages the blower. A quick fix would be to drill and tap a hole in somewhere below the blower so breath through there, then plug it when using the blower.

couldn't they swap pulleys so it has zero boost than drive it on pump gas? I feel like they are going to destroy the engine and blower driving it with the belt off. I want to see this thing do low 9s not destroy itself.

@@302hobronco It would overheat the blower.. A spacer with a spot to bolt on a throttle body is better.

I could see a nervous twinkle in his eye. And I don't blame him one bit.

That much freedom,short wheelbase??.

George may end up on his head when he flips that thing.

I can not agree more. He looks REALLY nervous about this. He even said we need to take the blower off and we REALLY need that anti roll bar. I am worried for George. I know they worked hard to get this thing ready but SURELY they are not going to let George race this thing.

@@lilbitofjoy6130 yes they are

It won't be in one piece by the end, it is going to end up crashed.

I can already see the wheelie he’s going to do on the first pass

@@ForeverNeverwhere1 lol you’re probably right on that

I wasn't ready when he hit it first time. like "WOAH!"

@@ForeverNeverwhere1 I hope not but a roots style blower on a big block is rowdy as F especially with the boost they are running and no ant-roll bar. The big question is that engine going to live with it already running hot. Correction the Blazer has a small block in not a big block. I guess I was thinking about the 632 that was originally paired with that blower and the fact Mullet now finally has a big block that is also having problems running warn as well. Sounds to like Cleetus needs to spring for a couple larger radiators but that their program and ours to watch them on the struggle bus playing the overheating blues. Side not Cleetus posted on Instagram that the blazer did some agricultural driving when it lost it brakes due to the brake pedal becoming disconnected from the master cylinder. Speaking from a personal experience that gets real exciting real quick when you press on the brake pedal and it goes to the floor and then proceeds swing back and forth like Johnny and Susie kissing on a swing.

For what!!

@@Dontdelete420 his content. duh.

@@MrSupermugen thanks lol

Wouldn’t doubt it…. It’s a lot of power for what I feel is someone with not a lot of seat time 😬

Already did....

It's going to be another fiero. 😁

Just a good set of bump stops would help

Yup. King Bypass would do a WORLD of good up there.

Only 3 certainties in life. Death Taxes That blazer breaking

I agree maybe go gasser

Lol I bet George has PTSD after the fiero

They better be strong too or they'll fold like paper. 😂

That's assuming it survives Race Week...

°

Yup, was thinking exactly this. Plumb it into the heater core lines.

Or go getto, plumb the windows washer to the front of the radiator to mist water over the radiator as needed!

@@robstoeckel353 that's a 15 minute solution at best until you refill it.

Or a big oil cooler mounted underneath helps a lot from what I’ve heard

Seeing how roudy this thing is, im genuinely concerned for our boy George. This thing needs some serious anti-roll/wheelie fabrication installed. Hope they took it with them on the drive just incase. We all know how excited he gets. Praying for safe travels on road and strip.

Well, he lost his brakes and ended up in a field.

@@jonasthemovie excuse me?

@@RowanRedbrush Social media post, guess we will see it on youtube in a few

MURICA

“Stock”. Lol

"stock" It's got the same kind of belt jingle that the c7 does, chances are it's got a pro charger

@@Redsparrow12 That's just the Florida extra air conditioning package.

George is a great wheel man!!!

Wow I missed that. I love that guy!!!!! Talked to him last November - he is super cool.

I agree. If it's getting that hot on the dyno, they're definitely going to need to figure out the cooling or it will overheat while they're driving it between race tracks. I suspect there's some air in the system still but they're gonna have to do something else to help keep it cool.

@Billy White Jr. True, but not quite the full refresh that Leroy is getting. It's been a while since Leroy really pushed into a better bracket. No shame, he's a legend, but I'll be glad to see some more R&D being done on a new power plant in the chassis. :)

Hopefully it doesn't end up like a certain small red sports car...

He is scared! For good reason 😂😂😂

@@UmmmmmmmWhat It will with George behind the wheel.

A WHEELIE could destroy it. they are cool but very bad for the car and components...

@@chriscovillon850 really?🥴

Maddie needs a car.

@@shoutykat she should have ruby cause ruby is such a stable car

I'd love to see Maddie go with them some time on one of these drag and drive events and get her own car to drive.

@@shoutykat stop being thirsty, we are here for racing, not his wife

@@C6903 Facts. She's good support for the team. If she wants to race, Cleet will get her suited up when she's ready, and we'll cheer her on.

Hadn't thought of that 🤣 that's good ish

That's what happens when you don't have the water pump on XD Hope this thing survives the week

I’m with you man I moved to a new house six months ago I haven’t even plugged my normal TV cable box back in and if your newer to RU-vid I’m sure you probably know this but if not check out 1320 video they do by far the best coverage of race week but they missed last year’s 2.0 so I’m kind of worried they might not go to this one but seeing as how they sponsor the event I’m hoping they’re going to be there

C5 fan here too. I have a C5.

Are you thinking about the Butternut yellow comment? That was for the 3rd gen Camaro.

fat chance lol...

👆👆Congratulation you have been selected among my shortlisted winner’s🤩🤩🎊🎉🤩🤩🥰🥰💯💯💯💯💯🤩🤩🤩🎊🎊🎊🎊🎊🎊🎊

Gonna miss Leroy too

Depending on the orientation of the track, he might speed it up. Or switch the N/S poles.