Great video! Looking to by my first one starting out. Actually setting up a pressure washer set up for my striping business. I’m looking at two units one being a cold water 4 gpm 4000 psi and other is a hot water 2700psi 30mph . Any suggestions on the two? And looking at surface cleaner with / without the casters wheel’s. Your second one with the handle would you recommend that one if so any info we’re to get one? Thanks again!
The 4gpm is not big enough to push that surface cleaner. Rule of thumb: for every gpm, you can go 4inches on you surface cleaner. So you shouldn't go over 16in on a 4gpm.
Do you need a 5000 psi pressure washer with the 36 inch? I have a 36 inch but waiting to purchase a 5000 psi pressure washer. I have a 4000 psi and the 36 inch does not clean at 100%. It cleans at about 50% with my 4000 psi pressure washer.
you need a higher gallon per minute pump. so for every 4 to 5 inches of Surface cleaner you have it is 1 gpm . so if you have any 4 GPM pump it will run a 16 to 20 inch Surface Cleaner.
We would say, 4000 probably would work better than the 3500 we have. However, the gpms are what's important. We ran this with an 8gpm-3500 psi unit. We still had to change some tips to get good performance.