Тёмный

Outdoor Kitchen, Part 2: Concrete countertop forming, pouring, and finishing 

Shoestring Martha
Подписаться 14 тыс.
Просмотров 204 тыс.
50% 1

In this installment, we build the forms for our BBQ island's concrete countertop, including its bar area, and fill them up with very rocky concrete. There is some discussion about the pros and cons of Sakrete Extra Strength 5000 vs the Quikrete pre-mixed countertop concrete, some hiccups, headaches, and snafus we had, and how we resolved them. Finally, the fixing, scraping, sanding, and sealing.
In the end, we are very happy with the result. We did not want a perfectly smooth and angular slab. If that were the case, we would have just gotten granite. Instead, we ended up with the beefy, industrial hunk of art that we had invisioned.
Clearly, we are first-timers, and recommendations and warning are based on this one experience only.
NOTE: It was pointed out that Flow Control is meant to be used with Rapid Set concrete (the kind with polymers in it). So us thinking it made managing Extra Strength concrete easier could be total flimflam! Expert Googlers and concrete masters feel free to clear it up in the comments :)
Accessories we used (affiliate links included):
Mophorn Outdoor Kitchen 14W x 20H Inch Wall Construction Stainless Steel Flush Mount for BBQ Island, 14inch x 20inch, Single Door with Vents -- HEADS UP! The opening was too narrow for a standard propane tank. It was too late to return it, so we ended up just buying a smaller tank. Bonehead move, but we made it work.
amzn.to/34NZT2x
Mophorn BBQ Access Door 20W x 14H Inch, Horizontal Single BBQ Door Stainless Steel, Outdoor Kitchen Doors for BBQ Island, Grilling Station, Outside Cabinet
amzn.to/3pnpyZj
Mophorn 18x20.5 Inch Outdoor Kitchen Drawers Stainless Steel with Handle for BBQ Island, 18 x 20.6 x 12.7 Inch
amzn.to/2RqQpal
Also, one should note that the handles are different on each item. Just a heads up, in case that's a deal breaker for you.
The drink trough is an Ariel 42" zero radius undermount bar sink, and we got it from Overstock. We top-mounted it, in case we ever have to replace it.
www.overstock.com/Home-Garden...
I've even seen people use a length of gutter, but we wanted something sturdier and wider, with straight sides.

Хобби

Опубликовано:

 

2 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 90   
@rdot980
@rdot980 Год назад
I've made pre-formed concrete countertops before. I recommend using plasticizer in the mix for workability. I also recommend vibrating the sides with at least a palm sander without sand paper. Tapping just doesn't cut it. Leave the forms on for at least 24 hours to avoid the risk of damaging the whole slab by removing them too early. 3 hours was super aggressive. I'm glad it worked out. If someone reading this wants to get REALLY serious with it, mix your own concrete using white Portland cement, white sand and small white aggregate. That will help with adding color and you won't have the big rocks found in the 5000 mix off the shelf. I also added in nylon fibers to help prevent cracking. It's hard work, but can be really satisfying. With wet sanding, you can you achieve a very smooth finish if that's what you want.
@ShoestringMartha
@ShoestringMartha Год назад
Thanks for the pro-tips! I pinned it, so others can see. 📌
@ambastha09
@ambastha09 2 года назад
Awesome job Martha..I am feeling more confident now to start this project after watching your videos
@hoppy760
@hoppy760 2 года назад
That was a great video/tutorial. I am getting pumped up to do my own. Thanks!
@eme5
@eme5 2 года назад
You guys are awesome. Cool build and helpful video!
@dotwall8958
@dotwall8958 3 года назад
Amazing. I love to see OTHERS work. A great job.
@ShoestringMartha
@ShoestringMartha 3 года назад
Thank you! Cheers!
@havechopstickswilltravel2990
Wow. Looks wonderful.
@belvederebarbados9139
@belvederebarbados9139 2 года назад
Good video. Well explained. Looking forwards to doing something similar next year
@BustaGrill
@BustaGrill Год назад
Part 1 and 2 were very helpful. Thank you.
@ShoestringMartha
@ShoestringMartha Год назад
Glad to hear it!
@johnmaurer5972
@johnmaurer5972 Год назад
Great videos! Thank you,
@timmyhendero3373
@timmyhendero3373 3 года назад
Great job
@brendanmartin2445
@brendanmartin2445 2 года назад
Awesome!! 💪🏻💪🏻🔥🔥🔥
@joe198032
@joe198032 2 года назад
Nice job
@billpliske
@billpliske 3 года назад
WOW ... this was super impressive. I can't even imagine trying to do something like this on my own. Great job!
@ShoestringMartha
@ShoestringMartha 3 года назад
We did so much research and planning, but it's totally do-able!
@iowamatt2519
@iowamatt2519 3 года назад
For future reference, use portland cement and a rubber float to fill in the faces. It's a lot easier. Also use T25 structural screws, won't have to worry about swelling. Good job !
@ShoestringMartha
@ShoestringMartha 3 года назад
Thanks for the tips! Hopefully they will help out some viewers who plan on taking this on. :)
@illuminatitommy5488
@illuminatitommy5488 3 года назад
nice job. You could cut down your finish effort with a mag to rework it. I'm pouring one tomorrow for a restaurant . I've worked concrete for 28 years, it's all about how wet it is when you finish. Hope i can figure it out tomorrow lol. thanks for the vid, i'm trying to get in the mode.
@ShoestringMartha
@ShoestringMartha 3 года назад
Good luck! You've got 27 years and 11.5 months more experience than we do -- you'll do great!
@gchaurais
@gchaurais 3 года назад
Soooo much work. Thank you for helping me decide to go with Granite! JK - great work! :)
@ShoestringMartha
@ShoestringMartha 3 года назад
lol - work smarter not harder! 😂
@bjbhehir
@bjbhehir 2 года назад
I used granite too!!
@felipelarrondo1308
@felipelarrondo1308 Год назад
So cool, you explain everything so well, very nice job 👏👏👏
@bradleycox6764
@bradleycox6764 3 года назад
i thought that was going to be a gas fire pit - gave me an idea lol but a sink is cool too
@ShoestringMartha
@ShoestringMartha 3 года назад
Also a great idea -- think of all the s'mores you can have!
@doona7848
@doona7848 3 года назад
Looks great! The 5000 mix sets up faster than a lower stength mix which mean more arm work to finish it.
@ShoestringMartha
@ShoestringMartha 3 года назад
💪 You aren't kiddin'! 💪
@doona7848
@doona7848 3 года назад
@@ShoestringMartha 😂
@danielson2454
@danielson2454 2 года назад
A bit rough finish, looks like the concrete was setting fast.
@331SVTCobra
@331SVTCobra 3 года назад
On a project like this I highly recommend either buying a cement mixer or renting one.
@ShoestringMartha
@ShoestringMartha 3 года назад
Highly recommended for anyone who wants to avoid the back-breaking work of mixing like a maniac! 😂 We considered renting for this project, but decided to save a little cash and we don't have a pick up truck or trailer. We might actually buy one before our next concrete project, so it's just delivered to us.
@isawthesign5074
@isawthesign5074 3 года назад
Hawkeye fan? Saw your shirt at 1:19! Nice work!
@ShoestringMartha
@ShoestringMartha 3 года назад
Well-spotted!! Yes indeed, 50% of this duo is Iowan. :D
@antoniopecora9837
@antoniopecora9837 2 года назад
Great video and awesome job! I am using Durock as a base for my countertop as well and it comes out about 7 inches from the base. I was thinking of building the wooden form on top of the Durock instead of attaching the 2x6s to build the floating countertop. Once the cement cures and I remove the wooden supports, do you know if the cement would have bonded with the Durock? If not, I was thinking of removing it along the outer edges once the cement countertop had cured. Any advice would be great!
@ShoestringMartha
@ShoestringMartha 2 года назад
Thank you! Honestly, I do not know. But in my UNprofessional opinion, I *think* it would bond with the Durock, since it's so porous -- but that is an absolute guess. Perhaps one of our concrete experts will chime in with a definitive answer.
@Sparkchaser_
@Sparkchaser_ 3 года назад
Concrete vibrator helps with the air bubbles
@glennstruzinski
@glennstruzinski 3 года назад
Next time watch the Michael Builds series.
@lemazingkingdom4318
@lemazingkingdom4318 2 года назад
I wish you were my neighbors
@bsdetjack
@bsdetjack 3 года назад
Beautiful job, hate to tell you now but it you slap the concrete several times with your float it brings the water to the surface and gets smoother
@ShoestringMartha
@ShoestringMartha 3 года назад
Alas, that part happened during the time when my phone battery died 😑 Though, I did more of a squish and push, than a slap. 🤔. It was like a block of feta in a tub of brine. 😄 Others have suggested a magnesium float too - but we didn't see the point in buying one for a one-time project, and in the end, we were happy with the interesting, varied surface. Folks who are about to take this on, if you like smooth concrete: magnesium float, and give it some slaps!
@bsdetjack
@bsdetjack 3 года назад
@@ShoestringMartha very well done, i like the over engineering. I just started mine
@jan-mariepottle7670
@jan-mariepottle7670 21 день назад
@@bsdetjack shaking your screed board and your magnisium float on the very few times of floating/screeding will help push the aggregate down and juice to the surface which makes it way easier to close with a steel trowel. Good job either way. That's a lot of work and not easy. Very Brave lol
@blecngzm3291
@blecngzm3291 3 года назад
This is very nice. My question is: the base upon which you pull the concrete mix, when the concrete drys up, do you remove it or you leave it there?
@ShoestringMartha
@ShoestringMartha 3 года назад
If you mean the wood under the bar / overhang -- yes! It happens very fast, but you can see us pry it off around 12:37
@billburke8613
@billburke8613 2 года назад
Wondering what you attached the 2 x 4 to on the island for the framework of the countertop. Also curios on the overhang why wood instead of cement board. Do you have a complete directions for the counter top build? I see the 2x4 but not clear on how to attach. I would like to do this on a steel frame also.
@ShoestringMartha
@ShoestringMartha 2 года назад
I believe we used hex head lags, maybe 3" long? As for the overhang, I'm not sure that cementboard would hold that much weight, unsupported, but I could be wrong. I also suppose you would have to leave it there, when the cement is dry. We just saw that everyone else used wood, so we did too. We are definitely too inexperienced with concrete to provide good instructions, and we made a lot of mistakes. We learned all we know (be that as it may) from the REAL concrete experts on RU-vid. Happy to help with any other questions you might have, however.
@steviefresh88
@steviefresh88 3 года назад
Does the flow control work with regular concrete mix? I was under the impression it’s for rapid set type of concrete that has polymers added to it.
@ShoestringMartha
@ShoestringMartha 3 года назад
Not sure where we got the idea to use it -- probably one of the dozens of concrete countertop videos we watched -- but entirely possible that those people were using rapid set concrete, and we didn't notice! It certainly *seemed* easier to manage the concrete when we were using more of it. Could be more coincidence than causation. Perhaps it was more to with the ambient temperature or water ratio or we were just tired. I do not know. I will add a note to description to warn people to do their own research when it comes to Flow Control (and everything, really), and certainly do not take the word of a couple of bozos from the internet. :D
@omartos7841
@omartos7841 Год назад
Ya right
@shaunquinn1964
@shaunquinn1964 10 месяцев назад
You can just hammer the socket head onto the bolt and then undo
@johnkeesee3252
@johnkeesee3252 2 года назад
One additional question....I went to both home depot and lowes for the concrete wire mesh and in both stores the mesh was rusted. Is this an issue. My concern is the rust color bleeding through the contrete. Where did you get you wire?
@ShoestringMartha
@ShoestringMartha 2 года назад
We got it at Home Depot. From what I've read, it's pretty common for it to be rusty, and shouldn't cause an issue.
@jameschristopher3405
@jameschristopher3405 2 года назад
No issues woth rust
@rustykhan2919
@rustykhan2919 3 года назад
Looks very nice. Just wondering if you have had any cracking issues with the counter top Really looks very nice.
@ShoestringMartha
@ShoestringMartha 3 года назад
Thanks so much! 🤞 No cracks so far 🤞
@imranjaffri4705
@imranjaffri4705 2 месяца назад
Amazing work ! What grit sand paper did you use?
@ShoestringMartha
@ShoestringMartha 2 месяца назад
Thank you! It was a long time ago, but I think it was 400 or 600 🤔
@MattG101680
@MattG101680 3 года назад
How are you loving the bar top? I am thinking of doing this at my house in Mesa, Go Hawks!
@ShoestringMartha
@ShoestringMartha 3 года назад
So much! Between it, the firepit lounge area, and bag boards, there is honestly no other place we would rather hang out. We're trying to figure out where we can fit a putting green next. :D You should totally go for it!
@MattG101680
@MattG101680 3 года назад
@@ShoestringMartha, Thank you, I was afraid that the concrete overhang would start to carck with a little time.
@ShoestringMartha
@ShoestringMartha 3 года назад
We used extra strength mix, reinforced it, and worked out the bubbles. It's solid. I'm pretty confident that it will hold up for a very long time. We shall see!
@sincityhvacr
@sincityhvacr 3 года назад
very nice whats the height of the bar area
@ShoestringMartha
@ShoestringMartha 3 года назад
Thank you! Finished height is 37.25". We were shooting for 36", but then decided to go for a thicker slab.
@stevestanton-jb2qj
@stevestanton-jb2qj Год назад
nice Video! what is the thickness the countertop?
@ShoestringMartha
@ShoestringMartha Год назад
Thanks! Finished thickness is 2.5".
@brookmensing5528
@brookmensing5528 2 года назад
How is the sealer holding up after a year?
@ShoestringMartha
@ShoestringMartha 2 года назад
Pretty well! Still resisting water and general crud, but we've found that oil and grease will stain (but can powerwash them off). Could probably use some fresh coats of sealant, for sure.
@barrymontgomery5183
@barrymontgomery5183 3 года назад
Martha, great video! Where did you get the drink trough? I can't find one anywhere
@ShoestringMartha
@ShoestringMartha 3 года назад
Thanks so much! We got it on Overstock -- this is the one: www.overstock.com/Home-Garden/Bar-Sinks/24857/subcat.html?featuredproduct=8198228&featuredoption=11453901
@michaelb3822
@michaelb3822 3 года назад
Where did you get the sink/trough insert?
@ShoestringMartha
@ShoestringMartha 3 года назад
We got the drink trough from Overstock (or maybe Wayfair?). Unfortunately, it's is no longer available. It's an Ariel 42" zero radius undermount sink. The 32" is available on Amazon, but it's a bit more expensive: amzn.to/37KXHe8
@ShoestringMartha
@ShoestringMartha 3 года назад
Looks like it's back in stock at Overstock! www.overstock.com/Home-Garden/Stainless-Steel-Undermount-Kitchen-Prep-Bar-Sink/8198228/product.html?option=11453901
@sprkplug21
@sprkplug21 3 года назад
How many bags of concrete did you use?
@ShoestringMartha
@ShoestringMartha 3 года назад
I think there’s a tally in the Start-to-Finish video, but if I recall, we bought 10 and returned 2 - so 8. 🤔
@TheSwim92
@TheSwim92 Год назад
Where did you get the drink holder?
@ShoestringMartha
@ShoestringMartha Год назад
It’s from Wayfair: www.overstock.com/Home-Garden/Stainless-Steel-Undermount-Kitchen-Prep-Bar-Sink/8198228/product.html?option=11453901
@charliebrown9771
@charliebrown9771 Год назад
where are the air vents located
@ShoestringMartha
@ShoestringMartha Год назад
There’s one level with the counter, directly behind the grill, and one near the ground on the backside. I think they’re shown in part 3.
@javieresparza897
@javieresparza897 11 месяцев назад
I see you are not a concrete expert 😂
@ShoestringMartha
@ShoestringMartha 11 месяцев назад
Well no sh*t 😂
@biga4684
@biga4684 Год назад
Ready for tile wtf you spent money on color now your putting tile over it yes I would to
@ShoestringMartha
@ShoestringMartha Год назад
🤔
@thelifeofflipskip3584
@thelifeofflipskip3584 5 месяцев назад
If you are good at finishing concrete u can skip the sanding step😅
@ShoestringMartha
@ShoestringMartha 5 месяцев назад
👍🏼
@smillardy
@smillardy 2 года назад
If you are a do it yourselfer please don’t do concrete like this, talk to a pro or contact me i will give free advise
@smillardy
@smillardy 2 года назад
So many bad ideas here. People should do more research before you attempt such things.
@skiprope536
@skiprope536 10 месяцев назад
Sorry guys. Butcher job.
@ShoestringMartha
@ShoestringMartha 10 месяцев назад
🙄
Далее
Make Your Own Concrete Countertops (From a Kit!)
15:40
Просмотров 446 тыс.
COMO HACER UNA ENCIMERA Y MESA DE CONCRETO/CEMENTO
25:22
Spray on Countertops | Stone Coat Epoxy
12:07
Просмотров 18 млн
How To Make A DIY Concrete Countertop
14:08
Просмотров 65 тыс.
How To Fix / Resurface Damaged Concrete Sidewalk | DIY
10:33
Outdoor Kitchen Plans | Top 5 Mistakes to Avoid
8:11
Иваново - город невест
0:20
Просмотров 6 млн