Over the Range Microwave Oven Install - GE Profile PVM9005SJSS 

Realistic - not so perfect, smooth, and music covered. Honestly we worked at it harder than this but this didn't set us up to think it happened by magic! Really appreciate this video.

I really like it When Husband and wife working together Peacefully...👍👍

Just bought this model and will be installing this weekend. Thanks for the video! So detailed and quick how to

you guys worked together real well.

Can you come do mine, because my husband and I don’t work well together with projects😂

I just purchased the same model!! Thank you for posting. The video was very helpful!!

Great video!

Circle thingy 😂. Thanks for the videos.

I'm not sure whether to commend you guys for working together as a team without arguing, or being able to keep the kids out of the kitchen the whole time while you all were working.

Going to attempt this weekend! Thanks for the video!

Nice video! My husband and I are much old and much weaker than you two and we didn't have the strength to lift this baby up above our shoulder. We ended up using a car scissor jack to hold it in place instead of using our own mussel. We used the jack both in uninstall old one and install the new one (the same as yours), no sweat.

this video helped me.. i was super stuck as the new micro i was installing was 1/8" taller and the backsplash went up too high!! reusing the old hanger (had to grind the tabs slightly) mounted slightly lower, but on TOP of the backsplash tile was my ticket to victory. thanks again.

Very nice instructional. Looks great!

Very helpful. Thanks!

Thanks for sharing this. Was looking for a little more info/voice over regarding how you secured the microwave in the bracket.

Thank you. I was able to get it down all by myself!

We owned ours for 2 years and the most common breakdown on this microwave is the cable that connects the door to microwave (top left) will be pinched when the door open and closes. There's a video on RU-vid that explains how to fix it but he does not show you how to.

Great video and easy to follow

good job. just purchased the same package but w/ gas range and swapped out the fridge for one w/ the water dispenser inside instead of in front

Thank you for posting this! I really enjoyed the video and found it helpful. If I could make one suggestion it would be how to rotate the motor for re-circulation and so forth. Thanks!!!

nice video sr my micro just die today now i have this chalenge to replace it now i know thanks so much for your video twoo tumbs up

No swearing, impressive😊

Good luck! If it works like my GE Profile, it will be shorting out in a few years.

Top right and left tile spacers could've been removed and replaced with wood, easier than drilling through tile. And for me to much gap between bottom of cabinet and top of MW. Now don't get upset just my opinion. Good job👍

Nice video and nice family.

Great video! I love the look, and been thinking about getting this microwave. It's been 3 months.... how are you's feeling about it? What do you think of the longer door, compared to your traditional one? Would you recommend it, or stick with the traditional design?

Does the interior have a light? Or, does it light up when in use?

Are there 36in filler kits available for this microwave? If so can you provide a link. Thanks great video!

Can you vent fan to an outside duct? Do you drill a separate hole for that? Does the template show you where to do that?

I just finished my install on the same MW and I am not sure how the blower fan covers should be located ? I can see the squirrel cage looking from the top down is this correct or not. Also do both the top and back cover have to be covering the squirrel cage fans??

Nice editing out all the yelling😂😂😂😂

What can make cold air come out the sides of the microwave? Would it be the guy didn't properly line up or hook up the vent that goes up into the attic? It's so cold now that it is winter and my kitchen isn't warm. I even had more insulation put in and it is still cold around it and inside when I open the door.

Your boys are adorable!

Mine is not a over the range model. It made a few loud noise and looked like a lightning bolt struck inside of it. So far it looks like a paper thing caught a couple burn marks on it?

Did you have to reposition the blower motor to make it recirculating?

Can you make a video on service this and also my microwave keep blowing the power outlet after having it for 3 years, I have already replaced outlet twice any idea what that might be ?

Here is my experience so far with this MW. We purchased it about 6 month ago as were installing the wall duct for rear venting in a new kitchen wall. We live in a cold climate so opted to vent horizontally to prevent heat loss and the dreaded vent condensation pooling in the microwave and destroying it in 6 months routine that you read about all over the net. To anyone wanting a well-insulated rear duct with a snug airtight connection to the MW, you will have to put some serious thought into it as appliance manufacturers would rather spend development $ on fairly useless but glitzy features like blue tooth connectivity rather than designing a system that allows for precise ducting. This is not unique to GE or this unit in my experience. Anyway, I removed the mounting bracket from the unit 6 months ago to locate my ducting. While the instructions do not say to replace the two screws holding it there for shipping, the look like permanent screws and match the other permanent screws holding the side and top housing in place, so I replaced them. It would be nice if the instructions clearly said to discard these screws because it took some troubleshooting to realize that the unit cannot be installed on the bracket with the screws in place. I probably would have caught this if I had been installing the same day I removed the bracket from the unit, so this problem is probably pretty rare. But the most aggravating thing was that the paper template's location for the toggle bolt holes was a half inch off of their actual location on the bracket. It turns out that a 1/2" is right in the sweet spot to make drilling a second set of 5/8 holes in your sheetrock extra-aggravating as the holes overlap.

I didn't see you connect the vent fan to any exhaust pipe. Where does the air flow?

Just installed and the microwave is tilted up..about 1 inch difference between top and bottom. Was it installed wrong?? Do I need those spacers on top?

I installed this model last night, put potatoes in for 10+ minutes now it won't work anymore. I wonder what went wrong

What’s the name of the leveler app on your phone?

Where does the exhaust air go

I can do this by myself

How come you didn’t vent it?

How you get the smoke 💨 out of your house

? No ventilation?

How do you replace the charcoal filter?

Are you still a fan of this microwave?

Diamond hole saw wasn't necessary.....

Just getting ready to go camping

This model was made from lemons. I don't recommend anyone buying this GE model.

Do you not own a level....... What kinda nonesense these people doing these days...

I just bought this at Best Buy outlet as open box, unfortunately it doesn’t comes with the mounting hardware, so you know where I can get those?