Тёмный

Over the top dust collection on the table saw 

Slow and Expensive
Подписаться 20 тыс.
Просмотров 8 тыс.
50% 1

Over the top dust collection on the table saw. I share a simple and effective solution for extracting the dust that comes off the top of a table saw blade. Breath easy, DIY. Drop me a comment and subscribe for more!
Get your shirt on! shirtpuppy.com
Table saw set up video • My amazing table saw s...
Cyclone dust separator video • Cyclone dust separator...
Cabinet build series (playlist) • How I build cabinets -...
Shop vac dust collection (playlist) • Dust collection adapte...
Helpful affiliate links below:
Auto vac switches amzn.to/49EYVVK
amzn.to/49BoCGy
amzn.to/42N2yqq
amzn.to/42GkiDL
amzn.to/3UG75c9
amzn.to/49hNymR
amzn.to/49kMezl
amzn.to/49acQ6d
amzn.to/49hNEed
amzn.to/49jkk72
amzn.to/3UPT7Vf
amzn.to/49fXrRO
amzn.to/49Fo7eq
Three way plugs amzn.to/49BpCdM
amzn.to/42HtxU0
amzn.to/49mnUgO
Zip tape 30ft roll amzn.to/42HsL9y
Box w/12 90ft rolls amzn.to/4bHbEJ1
Saw blades amzn.to/3I1LxiH
14" wet nozzle www.homedepot.com/p/RIDGID-2-...
14" wet nozzle (no locking ribs) Craftsman amzn.to/3SMcDz0
14" wet nozzle Workshop amzn.to/4bzmSPQ
Long hose that will work for most of the lines needed for this project
www.homedepot.com/p/Everbilt-...
Long hose kit from amazon amzn.to/3UKZ85j
Small shop vacs around $50 or less amzn.to/49gZ6Xf
amzn.to/48udUAU
amzn.to/3uCMZEU
amzn.to/3SHGmZV
amzn.to/3T0Opma
amzn.to/3uBG7Yy
amzn.to/3T1SaYl
www.homedepot.com/p/RIDGID-6-...
Big shop vac (under the table) www.homedepot.com/p/RIDGID-14...
www.homedepot.com/p/RIDGID-16...
Great Table saws amzn.to/48hpxL7
amzn.to/3uFgXbn
amzn.to/42KQyFN
www.homedepot.com/p/DEWALT-15...
Cyclone dust separators amzn.to/4bKHrsD
amzn.to/3V2uSDp
www.homedepot.com/p/DEWALT-Du... www.homedepot.com/p/Cen-Tec-Q...

Хобби

Опубликовано:

 

17 фев 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@lucastswick
@lucastswick 3 месяца назад
I appreciate how practical all your videos are. So good!
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Awesome! Thank you
@millsbrian55
@millsbrian55 3 месяца назад
Thanks for this. Was really interested in your table saw setup and this OTT dust extraction system is top notch. I love your presentation style as well, you are an excellent teacher!
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thank you! Much appreciated :)
@jerrystone8815
@jerrystone8815 2 месяца назад
Very creative great ideas
@SlowandExpensive
@SlowandExpensive 2 месяца назад
Thank you!
@henryrossouw930
@henryrossouw930 2 месяца назад
Genius.Afterr hundreds of videos on dust collection at last yours fit my needs and NO 4inch or 6 inch pipes and what not.
@SlowandExpensive
@SlowandExpensive 2 месяца назад
Perfect!
@jaredanderson2009
@jaredanderson2009 3 месяца назад
Just found your channel, these videos have way too high of quality and insanely original and unique content for the views they have received! These deserve to (and absolutely will) blow up. Bravo good sir, bravo!!
@SlowandExpensive
@SlowandExpensive 2 месяца назад
Thanks, I appreciate that!
@dtork47
@dtork47 3 месяца назад
What a clever idea, definitely doable! Stay safe.
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thanks!
@mikeellis9627
@mikeellis9627 3 месяца назад
This is exactly what I have been looking for! Thank you
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Perfect!
@ibfisher
@ibfisher 3 месяца назад
Man, this is genius, cuz you are a genius!!! Love it!!!
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thank you!
@qmoonwalker3847
@qmoonwalker3847 3 месяца назад
That is a great demonstration! Well done!
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thanks!
@anisopteras
@anisopteras 3 месяца назад
We are interested in a build video for the dust collection. T
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Okay, I will make it soon.
@chetleonard169
@chetleonard169 3 месяца назад
Tony! maybe upgrade the wet vac attachment but putting in some clear plexiglass sides?
@SlowandExpensive
@SlowandExpensive 3 месяца назад
I considered doing that when I first started using it but I've just never done it. I'm so used to not seeing the blade at this point I don't know that it would matter much. Most of my work flow is plywood and the truth is it's only when I take my eyes off the fence that I get concerned. I treat the nozzle like the blade because I know it's under there and stay clear of it. Besides knowing how high the blade is set there really is no good use to looking at it. I'm of the opinion that the blade is going to be there spinning around and around just like it always does and looking at it is more likely to set me into a hypnotic trance and distract me from keeping the material tight against the fence rather than alert me of something helpful. I do have some plexiglass so I guess I should go ahead and finally make one. Thanks for reminding me :)
@short6691
@short6691 3 месяца назад
Excellent!
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thanks!
@willgould9739
@willgould9739 3 месяца назад
Cool. Thanks for sharing. I plan on building something like this, if I decide what to do. I am slow and cheap.
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thank you!
@houseoffire72
@houseoffire72 3 месяца назад
I'm so sick of dust man. Recently installed all my dust collection, about 35ft that runs under my cabinets with tee's & blast gates for my tablesaw, jointer, bandsaw & planer. I also did a 10ft run above the cabinets for my benchtop tools, sanders etc... I really like your idea & build. I work with alot MDF, speaker builds, even tho I have great dust collection I still get a little bit of dust off the back of the blade like you mentioned. Anyhoot appreciate the video, gave me an idea or two. Not sure I can go straight up, I may have to go off to the right & use a shop vac...
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Thanks! I feel for you working with all the MDF. It's some awful dust to deal with. Best of luck
@russveinot5754
@russveinot5754 3 месяца назад
Great video, Tony. I learned that with shop vacs, the less hose to shop vac, the stronger the vacuum. Why not hang the vac over the saw just low enough to take down to clean? the hose would be a lot shorter. You are right about the cyclone. They reduce vacuum and since all dust is fine dust only. Cyclones don't collect much fine dust. One question, Tony. Why didn't you put some soft bristles around the bottom outside edge of the wet nozzles? You can get lower on the outside edge and still see the blade? BTW, so that's how you spell the "F" word ?!!?. Good to know :>).
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Howdy Russ! Good questions. Hanging the vacuum closer isn't a bad idea, not having enough suction for the blade dust has never been an issue with it over there and I'm sure it will increase some when I remove the separator. I wouldn't want to have too much suction over the blade. It's possible, with too powerful of a vacuum to pull thinner lighter material (like 1/4" plywood parts) up off the table and have them suctioned to the nozzle and that could be an issue. I've actually gotten used to not seeing the blade and I treat the entire nozzle as the thing I stay clear of. If I really need to see the blade for some reason I just remove the nozzle and eat a little dust.:)
@rudispruell883
@rudispruell883 3 месяца назад
You down wit' ott? Well, you know me...
@SlowandExpensive
@SlowandExpensive 3 месяца назад
Awe yeah! :)
@mikefatovic6316
@mikefatovic6316 2 месяца назад
Plans would be great if you could share
@SlowandExpensive
@SlowandExpensive 2 месяца назад
I'll draw some up.
@mikefatovic6316
@mikefatovic6316 2 месяца назад
That would be great thank you
@glenellynrunner
@glenellynrunner 19 дней назад
Why not use a splitter, too?
@SlowandExpensive
@SlowandExpensive 18 дней назад
I'll sometimes use one if I'm cutting wild boards but I prefer not to use one when cutting plywood.
Далее
My amazing table saw setup
45:57
Просмотров 19 тыс.
iPhone or Android?😂📱🔥@milanaroller
00:13
Просмотров 2,8 млн
Is this the ULTIMATE Shop Vac Boom Arm?
8:03
Просмотров 38 тыс.
GTS10XC Dust Remover, Dem Staub keine Chance
17:44
Просмотров 34 тыс.
Table Saw Floating Over-Arm Dust Collection
3:05
Просмотров 60 тыс.
HOMEMADE Shop Vac Device TRIPLES your dust collection!
7:09
The BEST Miter Saw Dust Collection, Period
4:22
Просмотров 255 тыс.
Over Arm Dust Collection for my Table Saw
20:37
Просмотров 181 тыс.
Arigato !! 😂
0:11
Просмотров 3 млн