Oxygen Not Included - Tutorial Bites - Oxygen

Подписаться 21 тыс.

Просмотров 92 тыс.

50% 1

This tutorial bite for Oxygen Not Included explains how to include the oxygen! It covers early oxygen production, Self Powered Oxygen Machines (SPOMs) and carbon dioxide management.
0:00 - Intro
0:13 - Duplicant oxygen requirements
0:43 - Starting oxygen - Oxylite
1:01 - Starting oxygen - Temperate starts & Oxygen Diffusers
1:26 - Starting oxygen - Forest starts & Oxyferns
2:10 - Starting oxygen - Swamp starts & Sublimation Stations
2:46 - Rust Deoxidizers
3:03 - Electrolyzer basics
3:30 - Electrolyzer basic room
3:59 - Basic SPOM concept
4:35 - Half and Full Rodriguez intro
5:08 - Half Rodriguez
6:03 - Oxygen distribution
6:21 - Half Rodriguez continued
8:11 - Full Rodriguez
8:54 - Oxygen heat
9:26 - Tips for building and initializing
10:27 - One-image references
10:42 - Carbon dioxide management
11:00 - Carbon skimmers
11:11 - Mid and late game carbon dioxide management
11:54 - Other methods of carbon dioxide deletion
12:29 - Outro
You can check me out on twitch.tv/gcfungus

Игры

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@davepope3771 2 года назад

I’ve heard you say it a couple times now, you’re wrong about there being a penalty to mining oxylite. Natural oxylite tiles off gas at 50%. Yes, if you dig the tile the debris will be half the mass of the tile, but debris off gasses at 100%. So whether you dig it up or leave it in place, you will only ever get 50% of the mass of an oxylite tile off gassed as oxygen gas.

@GCFungus 2 года назад

I've just tested to confirm, and yes this is correct - thanks for the heads up.

@eintheshooter6258 2 года назад

wait so your saying its fine to dig up oxylite

@rocky2561 2 года назад

@@eintheshooter6258 yeah you won't loose any potential O2 from digging oxylite tiles up. But I believe the tiles offgas faster than the debris so if your low on O2 it's better to leave it in tile form

@daveballard8673 2 года назад

@@GCFungus You were correct. They updated this just a little while ago.

@PsytheZero 2 года назад

@@daveballard8673 no, this was the case over 2 years ago.

@ericmaloney6730 2 месяца назад

Now just waiting for the Not and the Included tutorials so I can finish my Oxygen Not Included base 🙏

@SeraphLore Год назад

Really, you deserve an Oscar for this! I finally understand that Rodriguez thing. And it worked! I just made it and it worked! I can't believe it! A small space for such a good production of oxygen. Amazing. I reduced the space for oxygen production by 70%. I used so much space on my layout it's even shameful! Thank you so much for explaining this as simply as you did for us mere mortals. LOL! Great job! Klei MUST hire you!

@Elektrikalkillerkat 10 дней назад

2024 came by and said hello to you all! Thank you for all the great content, have watched it many times. i build one, maybe two bases a year, then i go to other games. But a always return ; to ONI and to your channel. 🙂 See you in 2025 and all the best to the community! 🐱

@GCFungus 8 дней назад

Thanks for watching along and glad I could help. Best of luck!

@DFWanderingKid 5 месяцев назад

I really appreciate your one-stop shopping images for the full builds. They're nicely laid out and helpful for reference as I get back into the game. I had a stackable version of the full Rodriguez... but it wasn't as tightly built. I like that better.

@josiahhockenberry9846 Год назад

Built the half Rodriguez and it worked like a charm. Thanks🙂

@axixmu7267 10 месяцев назад

this is such a useful tutorial, been following your tutorials for sometime and they really improved my dups lives! Thank you so much!

@donaldb87 2 года назад

Two tips about the spom. First, if your water source is cool enough you can snake radiant pipes around the oxygen pumps at the bottom to keep the oxygen cooler. Second, when you are first starting up the spom (and dealing with the mixture of gases), it is much easier to just create and off shoot pipe from the one top hydrogen pump and pump everything out (some hydrogen will get out with everything else). Then, once all the other gases have cleared out and the oxygen and hydrogen pressures have become stable, then connect the hydrogen pump up to the hydrogen generators. It is similar to what you said in the video, but this way you do not have to repair the hydrogen generators, and you can create a fully enclosed spom and never have to break it open.

@TheHammockProduction Год назад

thanks a lot for the tips! just dealing with oxygen in my generators now.

@ArtemSayapov Месяц назад

You should always snake the water pipes, because even if the water is 99C, the electrolyzer will output 99C hydrogen and oxygen too. So either it cools the air (if water is less than 70C) or it equalizes temperature.

@leonschwarzkopf4282 2 года назад

Thank you so much for the SPOM design (:

@Scott_Burton Год назад

I have personally gotten a lot of use from the algae terrariums. Once you have a sieve, they use very little water, eliminate a tiny amount of co2, and can produce a good supply of oxygen. Just don't lock them in airtight areas, they will not stop producing regardless of pressure, so I had one chamber that popped the eardrums of every dupe in the base when someone opened that door with 24kg per tile of oxygen on the other side. They are also best used with lights for even more oxygen. Are they ideal? Probably not. But they are useful in the right circumstances.

@arigatoespacialsuperadmiti7316 6 месяцев назад

Probably the issue is that they create a lot of polluted water and needs to be manually treated. Sure, you could let it accumulate forever but youll run out of water. Oxyfern can be better but you can't make any more once the initial supply has been used.

@dojelnotmyrealname4018 3 месяца назад

The main issue with algae terraria is that literally nothing about them is convenient. They cause overpressure, require manual emptying, the polluted water offgasses, if you automatically water them they have tremendous difficulty filtering CO2, etc etc.

@callummcneill6266 2 года назад

Thank you! I have been wondering how to build a Rodriguez properly

@mrdrissou_ 7 месяцев назад

You need to be an engineer to play this game 😅 Thanks for tips 👍

@Tamizushi Год назад

Pdirt form arbor trees are also a good option for sustainable oxygen production. I realize that this video is a year old and that back then we had fewer ways to sustainable get filtration medium, but even without filtration medium, you can clean polluted oxygen by cooling it down into a liquid and then heating it back up.

@jlycurgus3244 2 года назад

This is excellent!

@YoGooN1 Год назад

Thanks for the video!

@atellismarin4607 Месяц назад

did something similar to control excess hydrogen, but I used a gas element sensor in the vent pipe and a filter to delay it turning on for 5 seconds. I placed the sensor 3 tiles away from the pump to maximize the hydrogen stored in the pipes. Gives a little extra time incase something goes wrong. Also I tend to disconnect it completely just because the build running on its own amuses me

@VadimBolshakov 11 месяцев назад

My 2 cents: 1) I usually add hydrogen loop for hydrogens, and route excess hydrogen to separate grid. This makes sure oxygen is always powered and you consume all excess hydrogen without waste. 2) I never built OR gate in this game as you can simply merge the wires directly and it will work the same ...

@louishermann7676 6 месяцев назад

Or gate and merged wires aren't identical and there are reasons to use a gate. For example, gates are one-way, if a machine is being run off one of your or gate inputs an or gate prevents the other input from triggering the machine where merged wires doesn't. Also there are times you might want to match the logic switching times. This comes up in switching power supplies. You split the logic signal, NOT one side and run them to two separate power shutoffs. The problem with this is that the not gate takes a tick to switch the signal, but the ungated line doesn't leading to power wire burnout. The solution is to run your ungated line through an or gate with a single input. Both logic lines now have a delay of 1 tick so they sync again.

@Junker-sq6pu 8 месяцев назад

Ive played this game for years and i keep coming to CG the OGFungus 😀

@Bujintei Год назад

Hey, I just started playing ONI again after I failed like 5 colonies back in 2019. I found your channel really really helpful and enjoy watching every tutorial even when already knowing about it or not planning to build it because they are so informative. But one thing struck my mind with all the 6 oxygen pumps designs: Wouldn't these designs get inefficient at some point since they produce 4x888mg/s oxygen (3552) but are only able to pump 3000mg/s out, resulting in overpressure for the electrolyzers. Is it better to build 8 oxygen pumps (7.1 needed technically) or would this just be overkill? Also do I need to build a seperate ventilation line for each pair of pumps? I haven't found a way yet to merge these pumps together without the oxygen jamming at some point in time.

@GCFungus Год назад

Well welcome back and thanks for watching - I hope they help get you much further in! As for the SPOM question, it actually doesn't matter. You are correct that the Full Rodriguez is limited by the pumps, but actually the half Rodriguez is limited by the electrolyzers (1776g/s O2 produced vs 2000g/s pumping). The reason it isn't an issue is that either limit is self regulating - i.e. if you have too many electrolyzers then they simply overpressure, and if you have too many gas pumps then the atmo sensors stop them from running some of the time. That means that the efficiency is always the same, regardless of which is the limiting factor, and the difference is simply the amount of oxygen that can be produced. Assuming it's being used for dupes then that is also self-regulating, as the oxygen consumed is only dependent on their number. E.g. if you had a full Rodriguez for 30 dupes, it would run pretty much all the time, but if you had two Rodriguezs then each would only run half the time.

@wittkopdotzgaming 2 года назад

Preety good, especially since I am trying to experiment with setups, BUT YOU FORGOT THE HYDRA!

@Graknorke 3 месяца назад

Game is called Oxygen Not Included Look inside a new game Oxygen is included

@frankyanish4833 Месяц назад

I don’t know if anybody else has mentioned this, but the mouth breather trait at the beginning is listed as taking triple the oxygen.

@GCFungus Месяц назад

Mouthbreather gives +100%, so it doubles the amount of oxygen not triples it. But that's still quite an annoying trait!

@frankyanish4833 Месяц назад

@@GCFungus yes, but the chart says +200%.

@jaredboudreaux4311 2 года назад

I agree with everything except the slickster thing... i ALWAYS pump my co2 into my oil biome with my slickster babies they eat it up and give free oil! it's so much better than spacing or washing it!

@Sotanaht01 Месяц назад

6:03 simply using vents to distribute oxygen is NOT a sure method. It relies on you having only oxygen in any area where you have a vent. Otherwise a small packet of some other gas (say polluted oxygen for example) can cover the vent temporarily and allow the oxygen out. This is fine in small cases especially where you are not significantly overproducing oxygen, but can easily lead to massive overpressuring if left for a long term over multiple rooms and with excess O2 production. Making sure your vents are always at the top of rooms helps. The only gas in the game later than Oxygen is Hydrogen, and as long as your electrolyzer is filtered properly it's unlikely you will have hydrogen leaking into your base consistently. Removing hydrogen is as easy as ventilating the top of your base as well, although that can cause problems with Polluted Oxygen, which is the most likely culprit in the long run for gas over-pressurization. If you are unable to keep your base clear of Hydrogen and Polluted Oxygen, you'll need to add automation to your vents. You'll want an atmo sensor and a filter gate for each vent. The filter gate will see that there has been a low pressure packet over the atmo sensor for several consecutive seconds, allowing a green signal through to release the O2 (sensor is set low=green)

@Flipdoos 2 года назад

About the filtergates; I don't use them in my designs, especially since i learned that a green signal on an automation wire overwrites any red signal, so I feel an OR gate is not necessary. Can you explain a bit more about why you use the filtergate?

@GCFungus 2 года назад

The idea of the filter gate is to ensure the Hydrogen line doesn't get backed up. So when the Hydrogen atmo sensor is green for too long it enables the generators to burn off the excess. If this were omitted then you could never store any Hydrogen. In this instance you are correct that the OR gate is not necessary and I do not personally use it in this set up. I included it as good practice and to potentially make the explanation clearer. The potential issue with not using OR gates is that the lines get merged together - so if one is green then both are green. If you wanted to use the same sensor for 2 purposes, then merging the lines without an OR, would mean both sensors would affect the 2nd input.

@robertbarbosa2386 Год назад

I really like your videos - clear and concise. I'm using the Half Rodriguez from your video, including the filter gate automation. I'm still seeing some small packets of hydrogen coming from one of the two oxygen output lines. I've had the SPOM running from six dupes and now have 11, and the hydrogen still shows up. Any thoughts on how I should tweak things to eliminate the hydrogen from the output line?

@GCFungus Год назад

That is odd, as the filter gate should ensure that doesn't happen. Do you definitely have 2 hydrogen generators, and the atmo settings correct? If it's not that then I can only suggest heading over to the discord to see if we can look at how you've built it.

@robertbarbosa2386 Год назад

@@GCFungus Yes, there are two hydrogen generators with correct atmo settings. I added a transformer off the battery and an incubator to try and burn off the hydrogen (after I noted the Hydrogen kept slipping thru). Would adding that extra load change any timing?

@OneBiasedOpinion Год назад

Just to clarify: do SPOMs self-cool by dumping their produced heat into the hydrogen, and then eliminating it in the hydrogen generators? I’ve been having trouble figuring out exactly how that works in these machines and my SPOM attempts (not Rodriguez machines, admittedly) always seem to overheat themselves- even being entirely built with gold amalgam -without an active cooling loop in place.

@GCFungus Год назад

Unfortunately not - the electrolyzer has a minimum output temperature of 70 degrees C. I always build the components out of gold amalgam, and cool the output. You can cool either the base or the oxygen out, just don't cool the water in. I've never had overheating issues with gold amalgam.

@Turfut730 2 года назад

Hi, just discovered your channel, really nice and clear tutorials ! Could you do a petroleum boiler one ? cheers, kurg

@GCFungus 2 года назад

Yep, petroleum boiler is one of the planned topics so hoping to get there soon.

@puransu20 2 года назад

For the SPOM, can you have it so that the system never mixes wrong gases without automation, ie. by having it run forever with infinite storage to prevent pipe backups? I was planning on just putting excess hydrogen/oxygen into infinite storages if the generators don't burn enough or the vents are overpressured.

@GCFungus 2 года назад

It depends by what you mean without automation. If both the oxygen and hydrogen always has somewhere to go (such as infinite storage) then you wouldn't need any automation to control overflow, which is the filter gate as I showed here. You would still need the atmo sensors to maintain the pressures though.

@puransu20 2 года назад

@@GCFungus oh nvm im stupid, the atmo-sensors are required due to the ratio of the gases produced or else there wont be any hydrogen left where it should be

@stefanocau4652 Год назад

In my planetoid i found a geyser that has an average output of 1200g/s of brine at -10°C. I would like to use a desalinator and use it to run a spom but I don't know if the geyser will give me enough water or if the water might be too cold to be used for oxygen production, what do you think?

@GCFungus Год назад

Yes that will work, and with an average output of 1200g/s you can supply oxygen for about 10.5 dupes. The issue will be the temperature, as the water output from the desalinator will freeze if below 0 degrees. Therefore I would recommend a liquid tepidizer to heat it before pumping. You can use a thermo sensor to control the tepidizer, then add a NOT gate linked to the pump (probably with an AND gate to a hydro sensor too).

@stefanocau4652 Год назад

@@GCFungus thanks a lot, after exploring a bit i found a geyser that erupts 8kg/s of polluted water at -10°c so i'll probably do what you told me on that geyser so i can run a full rodrigez because i'm really lacking on power, hopefully it's not germy water. Anyway thanks a lot, it's because of your tutorials that i bought the game after knowing it for a long time and i'm loving it, keep it up!!

@J4MM1E2 Год назад

Can you hook up an anti entropy thermo nullifier to the h2 output instead of one or two of the generators or would this mess with the gas ratios in the generator?

@GCFungus Год назад

You can certainly use the hydrogen from a SPOM in an AETN, but the ratios don't match well. An AETN requires 10g/s of hydrogen, and a single electrolyzer will produce 111g/s if running all the time. You would still need to send the rest to generators or storage.

@J4MM1E2 Год назад

@@GCFungus I see, thanks!

@donutfiend84 Год назад

I don't understand how your full Rodriguez doesn't constantly overload the machines without transformers. It was my understanding that both Electolyzers and Pumps have a max safe wattage of 1000? Or am I missing something?

@GCFungus Год назад

I think you've slightly misunderstood the way power systems work, and if you haven't seen it already then definitely check out the power systems tutorial bite: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M09gbwCCGt8.html . It is the wires that have the power limit, not the matchines themselves. For a half Rodriguez, the power draw is over 1kW, so you need either a conductive wire or any type of heavi-watt wire (as I showed in the video). The full Rodriguez draws over 2kW, so you would need 2 lower power circuits, or one heavi-watt wire circuit.

@EATZYOWAFFLEZ Год назад

Late comment, so hopefully you're still looking at these, but is the smart battery on the half Rodriquez not redundant? The atmo sensors would make sure if there is hydrogen to be used, it will be used, so there will never be a point when the smart battery will need to turn the hydrogen generators on. At least that's how my brain wrapped around it; I could be wrong.

@GCFungus Год назад

Having thought carefully, I believe it is still needed. You are right that in most situations, not having the battery won't make a difference but there is a scenario where it will make a difference. This is when the battery would be requesting power but there is not excess - in this case the hydrogen in the pipes/generators will be used to refill the batteries even though there is no excess. If you wait for the excess in this case (without the battery), then you have potential machine downtime if the battery runs out. And if you're covering that shortfall with other generators, then it's more likely that they will fill the battery up, only for then the hydrogen generators to turn on and waste the excess with full batteries.

@EATZYOWAFFLEZ Год назад

@@GCFungus Ah, that makes sense! Thank you for answering my question, your content has been incredibly helpful.

@killerheYzUse 2 месяца назад

7:40 daont u need a AND gate to work with the baterry?

@GCFungus 2 месяца назад

The condition you want is an OR not AND. Basically turn on the generators IF the battery is low OR there's too much hydrogen inside the SPOM.

@guachenim923 Год назад

7:30 could you show the settigns of the automation?

@GCFungus Год назад

I showed the full builds in the one take reference images at 10:27 including all the settings.

@danielschons7691 Год назад

the diging out oxylite loses oxygen is a mith

@SovietBR 9 месяцев назад

Hmmm, so the oxygen IS included

@GCFungus 9 месяцев назад

If you know where to find it ;) .

@MetalGearIV Год назад

well there is a problem, how you can cool the room, it gets more heat over time , using gold as you said it is not a good fix because it costy

@GCFungus Год назад

There are a couple of ways to deal with cooling - either cool the SPOM room, cool the oxygen lines coming out, or cool the base where dupes are. In all cases I would recommend using a cooling loop with a steam turbine and thermo aquetuners - I covered this in the tutorial bite for cooling. You can build the machines out of gold amalgam to prevent them overheating and this required very little material. The full Rodriguez only requires 1150kg of gold amalgam, which is probably 2-3 natural tiles of digging.

@lapis8183 10 месяцев назад

My half rodrigues does not work unless there's outside power input and I don't know why, I did everything exactly like you did Edit: it does work but barely, the battery's power keeps running out

@GCFungus 10 месяцев назад

Any SPOM design does require some outside power to get started, but once the gas layers have settled it should be very reliably self-sufficient. Of course if power is drained from the same circuits as the generators then it can still require more power to get started again. Beyond that I can't diagnose an issue without more information. The Rodriguez is at this point probably the most tested design in ONI history and definitely works!

@lapis8183 10 месяцев назад

@@GCFungus I I didn't change any setting on the battery after I built it, so it's minimum was on 0% and so it only required charging when it was on zero, after I changed that, and set the pump sensors to what you said (above 450/750), because it was originally on "below" setting, it works now Edit: also I want to thank you for the answer even though you couldn't help, I didn't even think you would answer, this is my first time here

@GCFungus 10 месяцев назад

@lapis8183 Yes, using below instead of above would cause the issue, so glad you got that fixed. I would also advise setting the minimum to something a bit higher on your smart battery (I usually go for 20) just to make sure the machines don't stop which can interrupt dupes. So far I always take the time to reply to comments if there's something I can add or help with - and the amount has been manageable at least up until now!

@lapis8183 10 месяцев назад

@@GCFungus thanks so much haha, I just started on easy mode, and put off metal refining and sustainability until cycle 200 because I wanted to do critters and stuff, and just arrived at the point where I can't figure out these things by myself so I used your tutorials and they're great, I think the best on yt

@TopViktorCool Месяц назад

Mini Rodrigues will let out heat

@GCFungus Месяц назад

Yes the electrolyzers do end up making a fair amount of heat, so cooling is required.

@TopViktorCool Месяц назад

@@GCFungus no I mean the power sift plate is transfering heat out of the Rodrigues into the air around it

@olagarto1917 Год назад

i hate the balance around the hidrogen generator, it should break even in oxigen consumption and never be power positive

@joelwinkel4715 Год назад

Dispite the name of the game being oxygen not included, i don't think i have ever lost a base to low oxygen.

@GCFungus Год назад

That's fair, I think that oxygen is really a very early problem, but one most players will encounter. Once you get diffusers up and electrolyzers then it's basically impossible to run out.

@saeeddavoody6925 2 года назад

the easiest way to start a spom that i found is to just add a gas filter to Hydrogen pipe and deconstruct it when it's done . it saves a lot of effort and dupe work which is very valuable at the start of game .

@GCFungus 2 года назад

I'm not sure I agree - as I demonstrated in the video it took ~40s at 3x speed to clear a full Rodriguez out which then generates 2/3 repair errands once. Is that not quicker than building a gas filter, extra gas line & vent, and power to it to then deconstruct it afterwards?

@saeeddavoody6925 2 года назад

@@GCFungus it's because dupes will repair even slightly broken generators and it can cause a lot of supply and repair errands. also problems occur all the time , so if you want to change something, you gotta be ready to repair them again and again. just put a gas filter and disconnect it after it's done , no need to deconstruct it either until everything is working and dupes have some free time. it's also so annoying to see those broken generators lol.