Paint Correction Made Easy! / Sonax Cut Max and Perfect Finish

Подписаться 55 тыс.

Просмотров 36 тыс.

50% 1

📺Subscribe So You Don't Miss Stuff!
goo.gl/DzwJ9W
Become a member and join! It's not a big deal if you don't want to or don't like the idea of this, in fact, you're not missing anything important. It's like extras and behind the scenes stuff, you used to get when you bought a special edition DVD. Do people even still buy those? Well, join if you want extra stuff. If not...It doesn't really make a difference.
/ @mirandadetailing
🔗Check out the links below!
Sonax Products. bit.ly/30pDYNy
Rupes 15mm Polisher. bit.ly/3l6cRiU
🏢Huge Amazon Store with tools and products we use daily!
www.amazon.com/shop/mirandade...
🚘Car Supplies Warehouse New Rewards Program!
The more you buy you earn credit!
Check out the link below and order some stuff!
carguysupplies.com?sca_ref=81745.BhlFvTbXDc
_
👕Visit our online store to purchase STUFF!
teespring.com/stores/miranda-...
🛒Miranda Detailing Amazon Shop
www.amazon.com/shop/mirandade...
⚫️Detailer's Cord Snaps!
bit.ly/3k0kk23
💻Visit our website for a HUGE list of tools and products we use! mirandadetailing.com/shop-2
Subscribe to our channel goo.gl/DzwJ9W
💎Click here for our mobile services: www.mirandadetailing.com/deta...
Miranda Detailing
804-972-3051
www.mirandadetailing.com
___
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
🧽🧪Tools and Chemicals
Chemical Guys Citrus Wash & Gloss amzn.to/2ypszRx
AM Foam bit.ly/2wO9pFf
Foam Cannon bit.ly/38FAc40
Super Clean amzn.to/2zbIS1H
Wash Mitts bit.ly/37oUUnz
Clay Towel. amzn.to/39pPk5C
Clay Bar bit.ly/2xngjRG
Iron Decon bit.ly/2WSbn1X
Another Iron Remover amzn.to/2UNEEbp
Jescar Powerlock amzn.to/2UrIRCV
Seal and Squeal bit.ly/2RSeVyl
DA Polisher amzn.to/2UGTYqq
Wax Pad bit.ly/2vUriBQ
Stoners Trim Shine Protectant amzn.to/2hpDgfH
Tire Dressing Silk Shine amzn.to/2xuC5Dt
Meg's Hyper Dressing bit.ly/37ugkAt
Myteelite II 8070 amzn.to/33SXMct
McCulloch MC1385 amzn.to/2ABFGwm
Vehicle Heated Dryer amzn.to/2JGFAsY
Ridgid Vacuum amzn.to/2i8Psyy
Casabella Brush amzn.to/2ErkKcK
Capri Air Blow Gun amzn.to/2i8pxqB
Detailer's Helper Belt detailershelper.com?aff=9
Detail Factory Ultra-Soft Brush amzn.to/2DahS7Q
Microfiber Towels amzn.to/2AESEK3
AutoMagic Hydro Shine amzn.to/2BpPDA4
303 Aerospace Protectant amzn.to/2Ad8r2l
Corrosion Technologies RejeX (Sealant) amzn.to/2zzwQBo
HDSpeed amzn.to/2xT3lGY
HDPoxy amzn.to/2T9mmCK
🐕Dog Hair Removal Tools
Lily Brush. amzn.to/2WaNJNz
Hoover Dog Hair Nozzle amzn.to/2BknvKO
Pet Hair Remover Stone amzn.to/2KYbNvu
Hoover Dust Brush amzn.to/2qMd3f9
🔦Lights
4 Pack LED Shop Lights 3600 Lumens 5000k amzn.to/2KiV9oT
5500K Photo Studio Light amzn.to/2DcQI0c
LED Light Bulb, 5000K Daylight, 1100LM amzn.to/2KdfVat
Astro 50SL Color Match Light amzn.to/2nqeyuN
Astro 50SLMAX 450 lm amzn.to/2Su3GuU
📷Recording Gear:
Canon SL2. amzn.to/2SniLhE
Comica CVM-V30 PRO Camera Microphone
amzn.to/2Ss4Tmu
#satisfyingdetailingvideos #autodetailingtips #mobiledetailing #interiordetailing #exteriordetailing #dirtiestdetailever #worstdetailever

Авто/Мото

Опубликовано:

21 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@wesoakes 3 года назад

Perfect Finish on an orange HDO as a one step always blows people away.

@enduringpursuit 3 года назад

Yeah after using sonax perfect finish I realized what I was missing. Came off so clean. Smooth polishing the whole time. Took out swirling great. I need about a quarter of product in comparison of other brands. Finished out with a yellow rupes pad flawlessly! I really feel it lives up to all the hype. Thanks for the great video.

@SamMBPBSB 3 года назад

I enjoy the fact that you make a note that you don't have to go for perfection, but enhancement is still a great end result! I enjoy your videos very much and definitely pick up a few tricks!

@jacoblidstone1688 3 года назад

Absolutely loved the fact you left in bloopers🤣👍....amazing job once again love your videos keep up the amazing work!!! From Montreal, Canada🇨🇦

@AmirAbdullah 3 года назад

Videos always informative as hell. Good stuff man.

@DetailingVibes 3 года назад

Looking good man! Im going to pick up some of this sonax perfect finish!

@1stfrompuertorico568 3 года назад

Wow, amazing products from Sonax. I only have from them their Alcantara cleaner and definitely nothing like it. I have the Meguiars products because they were readily available at Advanced Auto. I have purchased the pink one from Extreme Solutions that does all too and love it. Great that Sonax is water based and does that amazing job. Xoxo from Puerto Rico 👍🇵🇷

@millerdetailing4176 3 года назад

Awesome video Phil definitely love both of these products. The paint came out looking really nice thanks for all the great content.

@MirandaDetailing 3 года назад

Thank YOU!

@rolandotristan8105 3 года назад

Nice to see a company offer smaller bottles of a product. I only wish others did the same....

@robbienyc3102 3 года назад

Someone should start breaking down those large bottles in 4 parts and start selling on eBay ,I would love to try different products small portions at a time.

@alexisamtosta 3 года назад

Nice video man. I need to try Sonax out and 3D ONE. I only use finnishing pads to apply sealants or waxes.

@davebaldwin340 2 года назад

That's a fantastic finish love there products the ex0406 is a great product as well for small scratches and swirls good video as well

@TotalDetailing 3 года назад

It finished down almost better than new!

@ShineYourLightDetailing 3 года назад

Excellent video on the Sonax & your technique, Phil! :-)

@coryray8804 Год назад

Hi Phil ! Great video once again . The Sonax Cut Max and the Sonax Perfect finish gave me fantastic results on a older car a 1998 Black Lexus GS 400 . I used the Lake Country C C S Yellow pad's only with a Rotary polisher , for both the Cut Max and Perfect finish changing out several pad's in the process . I wanted to save as much clear coat as possible on a car 25 yrs. old . Then finished off with the Turtle Wax Hybrid Ceramic coating spray . Now 4 months later still looks great after several wash's . Thank you

@MirandaDetailing Год назад

I love hearing that!! Shine on!! 😎👍🏼

@RaldasDetails 3 года назад

As always great video brother!! 👍🏼

@dillanmistry 2 года назад

You are a legend for getting the results by using it right

@MirandaDetailing 2 года назад

Thanks man! 😎👍🏼

@nicorallysport 3 года назад

Great job my friend 👍 The disc meguiar's look really great !. I tested the SPTA fast finishing (one step) microfiber pads, they are very good !. But I will try the Meguiar's cutting & finishing.

@MirandaDetailing 3 года назад

Thanks!!

@scoupemaster 3 года назад

P&S inspiration is a good coating...a little tricky to remove and level but on red cars and similiar colors is amazing!!!!

@MirandaDetailing 3 года назад

I like it so far. I’m used a bunch of coatings and I’m used to ones that may need extra attention when wiping off. I found have found that as long as I have plenty of lights, towels, and work methodically around the panels I never have a problem. 😎👍🏼

@tillmandetailing 2 года назад

Bought a G9 polisher, as well as both of these products! Haven’t tested it yet, but I did buy both the Sonax red and black cut and finish pads along with the polish, but I love the way the orange pad worked out! I’m gonna have to play around with them a bit, and maybe start making RU-vid videos of my own as I’m just a one woman detailer over here 🙂💪🤷🏼‍♀️

@MirandaDetailing 2 года назад

Awesome! Let us know how your results turn out! 😎👍🏼

@CATU2243 3 года назад

Miranda thank you for your videos, I learned a lot Watching You videos I wash my first car my wife friend car using products from Turtle Wax, Black Magic and Eagle One. Work amazing the pictures before and after can tell you a lot about it. You have to try the Agle One A2Z All wheel & Tire Cleaner 2QT 64oz I think this is better four wheel and tires, I wish you can make a video about it using different wheels and tires cleaners with the Eagle One and thank you for all your help with your videos keep doing what you doing

@Albert-the-Astro Год назад

You did a great jod on all the deeper scratchers!

@MirandaDetailing Год назад

Thanks so much!!

@MindbodyMedic 3 года назад

As a total noob the first polish I used was Perfect Finish. Couldn't have been a simpler experience, took everything bar medium scratches. Then I bought urofiber 50/50 and it had most of the paint flawless. [with forced rotation makita]

@chrishart5097 Месяц назад

Uggh, I got some perfect finish recently 2nd hand but it was old and dried out😥 hopefully, I will get a new bottle soon but currently I'm rocking the yellow DA fine by rupes 😎

@davidsteckley8846 3 месяца назад

I like Jescar Ultra Power lock, followed by Collinite 845

@MirandaDetailing 3 месяца назад

Awesome combo! 😎👍🏼

@torresmobilecarwashandauto201 3 года назад

Amazing Product

@scoupemaster 3 года назад

sonax cutmax + perfect finish is my go to combo...0 dust...high cut...finish amazing and they are consistence.

@MirandaDetailing 3 года назад

I still got a little dusting from both products but it wasn’t bad. But yeah they work very well.

@scoupemaster 3 года назад

@@MirandaDetailing well i live in a very hot place and have no dust but i keep changing my pads for new ones contantly and i think that helps a lot.

@danlc95 3 года назад

Perfect Finish has a pretty nice wipe off too.

@kristips4694 3 года назад

Use with DA or Rotary machine?

@timgunn3670 3 года назад

Thanks Phil. Used Meguirs 210 and lake country black pad with da for one step in the spring. Didn’t remove all light swirl marks. I bought orange pads to use this fall. Can’t decide if I should switch to perfect finish

@MirandaDetailing 3 года назад

The 210 and black pad is too gentle. If you step it up to an orange or it will get better cut. Or step it up to m110 and the orange. It should still finish out really nice!

@timgunn3670 3 года назад

Thanks Phil appreciate your expertise

@blgjr1978 2 года назад

Great job

@dossegundos7145 3 года назад

👍🏼👍🏼 Thanks for sharing. Very quick nice results. Did you test other pads before choosing this combo, or based on the paint hardness you knew this combo would work?

@MirandaDetailing 3 года назад

I started with d300 and microfiber disc and then switched to this and it worked just as well.

@KnowledgeBomB837 3 года назад

Buick Lucerne thats a first for me love buicks

@ljhookem14 3 года назад

I have both (Sonax products) as well including the same microfiber pads but I live in Texas (south East) near the water and about a month ago in my garage, I did CutMax, 3DOne, and Griots FCC to see which would be the easiest to work with (on Ford F-150) and get good results. Out of those 3 the CutMax was the most difficult to wipe off and would streak although it just would take a little longer to get those out. The 3DOne & GriotsFCC wiped off like a dream. I did 2 step even though I didn’t really have to with 3DOne and Uro-Fiber pad. I used MF pad with CutMax and GriotsFCC. Overall all 3 were excellent but I’d say CutMax was the less user friendly for me of the 3 although it wasn’t difficult per se. It just needed some extra elbow grease with some CarPro Eraser. I agree on the priming...it’s really not needed even though I do it sometimes as I’m not thinking but most of the time with MF pads, I don’t prime and you should never prime a foam pad (absolute waste of time for sure with foam IMO).

@MirandaDetailing 3 года назад

Great info! Thanks for sharing. It’s weird that Cutmax was difficult to wipe off. I haven’t had a problem with it yet, and it’s still kinda humid in my garage

@ljhookem14 3 года назад

Miranda Detailing I want to say though I’m in no way at your level in correcting paint which is probably the reason we had some differing results.

@danlc95 3 года назад

Good to know. Sometimes the paint reacts weird though. I just did mustang by and 3D ONE was sticking as bad a Ceramic Pro. Fought wipe off all the way. Today it was Bentley. Looksikw the hood was re-sprayed. 3d One stuck to the hood, but nowhere else on the vehicle... Same pad, speed, and towels.

@Devon_Meadows 3 года назад

Have you not used sonax products in the past? Ex-Cut 05-05 on a black/white Buff and Shine Uro Fiber then finished w/ PF (on what ever polish pad you like) is my favorite combo right now

@MirandaDetailing 3 года назад

Nope. First time using them. So many products...so little time and money to try them all. 😆

@Devon_Meadows 3 года назад

Miranda Detailing haha i feel you! Good thing they’re always running sales on their site 😉

@Sheldon_Classen 3 года назад

Can't wait to see the application of P&S ceramic coating. What kind of device to you use to measure the paint depth?

@MirandaDetailing 3 года назад

It was a little paint depth gauge form amazon, it’s sold out right now. Elpidan- Paint Thickness Gauge Meter - Coating Thickness Gauge - Paint Depth Gauge Meter | Zero & Point Cal | Wide 2.2” HD Color LCD | Data Storage | Screen Rotation | USB Charging | Automatic F/NF … www.amazon.com/dp/B07WKCZJRV/ref=cm_sw_r_cp_api_i_kLrqFb7FRR571

@richardseem7948 3 года назад

great video and product review Phil.true believer u get what you pay for. great brand all across the board. give my regards to ur wife. b well stay safe buddy

@muhamadbalaki6918 3 года назад

Great video! Just a quick one, I did notice that you went through the body lines directly, does it cause any burns to the clear coat if I do the same on my own car? Should I use koch chemie H9 & micro cut as a combo or I should still stick to Sonax Cut max & perfect finish as a Beginner? Thanks for the help

@MirandaDetailing 3 года назад

Hi thanks. It takes some experience to know just how far to go when polishing over body lines and edges. As a beginning I would just go up to the body lines until you gain more experience and feel comfortable with the polisher. If you already have the Sonax products just stick with those. They work great 👍🏼😎

@Carlos.Rivera 3 года назад

Perfect finish + urofiber 50/50 = 👌

@tundrawhisperer4821 3 года назад

Carlos Rivera you’ve had good luck with this combo then? Have you used his pad with the Cut Max? Wondering if this would be affective too? Thx

@Carlos.Rivera 3 года назад

@@tundrawhisperer4821 will cut with less passes, finish it well but I recommend a finish polish to give extra pop

@hakman239 3 года назад

Pf with that pad will leave hazing on softer paint

@Carlos.Rivera 3 года назад

@@hakman239 did you encountered that?

@tundrawhisperer4821 3 года назад

hakman239 what about a 50/50 pad and the Cut Max combo?

@j1mobiledetailing205 3 года назад

I was able to use cutmax for one step on my 09 yukon denali i did s few passes with perfect finish but it was the same

@MirandaDetailing 3 года назад

Awesome. Yeah some paint react differently. Sometimes you can get away with a heavier compound and it finishes perfectly.

@majesticdetail3422 3 года назад

Hey my friend, was that Cut Max or Extra Cut? It looks like the Extra Cut bottle? Which cuts extremely well with a microfiber pad. Glad to see posting more videos now my friend. Be safe and have fun.

@MirandaDetailing 3 года назад

It was Cutmax. It’s their new bottle labeling. Thanks so much!! 😎👍🏼

@majesticdetail3422 3 года назад

@@MirandaDetailing Awww, no wonder. Ok thanks my friend. It threw me off. Lol

@MichaelBlast Месяц назад

What if you use a orange cutting pad with Sonax cut max ? Will you get results on a older Honda

@MirandaDetailing Месяц назад

Hi. Maybe…you’ll have to do a test spot and see how it comes out then proceed from there. There is no way of knowing exactly the softness or hardness of every make or model.

@charles-antoinelapierre7167 Месяц назад

Hi! How do you compare the gloss of Perfect Finish to CarPro Reflect? Also can I use this to remove a 2 yrs old coating to apply a new one? Thank you!

@MirandaDetailing Месяц назад

Hi. Gloss is so subjective. I honestly can’t really see the difference between any polishes and gloss levels. As long as it’s glossy, that’s all I see. Pretty much any polish paired with a medium pad will remove a 2 year coating.

@hakman239 3 года назад

If you have a solvent based polish ipa won’t be affective against it you will want to use a hydrocarbon based panel wipe then / body shop grade

@MirandaDetailing 3 года назад

What compounds and polishes have you found to be solvent based?

@hakman239 3 года назад

Miranda Detailing dodo juice lime prime it’s an abrasive pre wax cleaner good product tho

@MirandaDetailing 3 года назад

Oh I see. Interesting I really don’t see to many guys using Dodo Juice products these days. I’m sure many do but it’s rare that people use those products if they are doing a paint correction and coating. But that’s really good I go to know! 😎👍🏼. Thanks!

@hakman239 3 года назад

Miranda Detailing I don’t use it anymore I use angel wax perfect polish it’s water based it’s £9 for 500ml where as lime prime is around £11 for 250ml

@Sheldon_Classen 3 года назад

Also I used cutmax to compound my very car, and as I was cutting the product kinda beaded after the machine instead of the white haze. It was very humid in my garage and I'm very much a beginner not sure what was happing

@MirandaDetailing 3 года назад

Mmmm.. we’re your pads dry? Sounds like moisture form a damp pad.

@danlc95 3 года назад

It's referred to as "sweating".

@MirandaDetailing 3 года назад

Possibly. But there are many variables to consider here too. What was the age of the car? Did it have any protection like a coating? Etc. I haven’t experienced that with Cutmax. But I have seen that happen of the pad was damp from not drying out after washing them.

@tundrawhisperer4821 3 года назад

What are “boutique” polishes? Are they just your very high end products? Thx

@MirandaDetailing 3 года назад

Yeah it call higher end and more expensive products and tools “boutique” just a fancy word for fancy products. 😂.

@johnparkerzabala 9 месяцев назад

Sir what are the equal comparison pads for rupes using the sonax products you used? Stay blessed have a safe healthy happy weekend 🫡

@MirandaDetailing 9 месяцев назад

Hi. I have found the Yellow Rupoes Pads are also awesome. Thery actaully cut a little more in my findings.

@TheDex302 3 года назад

After the perfect finish, did you have to do an ipa wipe down for applying the ceramic coating?

@briandraper7630 3 года назад

Yes

@MirandaDetailing 3 года назад

I do a very light ipa wipedown. I don’t over apply and soak the panel down with it. I mist on the towel is all I need.

@edgardomateo2254 3 года назад

You should try %75 cutmax and %25 HD speed. With a medium cut MF oberk pad. You will be surprised and amazed.

@MirandaDetailing 3 года назад

Cool! I love combining products like that! That sounds like it would be awesome.

@gonzasdetailing 3 года назад

Pair both of those products half and half on a foam pad and you’ll have a nice 1 step with a great finish.

@grh5628 Год назад

Have a question about the ceramic coat product you mentioned. I have a 2020 buick encore that has been coated with system X and need to know if I can correct part of my car and coat over my existing ceramic?

@MirandaDetailing Год назад

Hi. Do you need certain panels redone? Was it repainted?

@grh5628 Год назад

@@MirandaDetailing yes I need to redo my hood. It has not been repainted.

@MirandaDetailing Год назад

@@grh5628 You can lightly polish with something like Dr beasleys NSP45 which is a primer polish and you can recoat right over it without a panel wipe.

@drivedetailedmtl 2 года назад

Looking to get into paint correction. If using the cut max and then finishing polish is it considered a one step or 2 step?

@MirandaDetailing 2 года назад

Hi. Yeah I guess if one is using 2 different products and pads I would consider that a 2 step.

@maxbravo9685 3 года назад

Do you measure the paint thickness before the paint correction?

@MirandaDetailing 3 года назад

Yeah I usually go around measuring quickly to get an idea of what’s going on.

@scoupemaster 3 года назад

the purpose of priming the pad is to have peak performance from the very begining of the compounding process

@MirandaDetailing 3 года назад

Yes I know....I watched and read all about it, still I don’t find it makes a difference at all. Plus I have spent time with Detailers who also don’t find it necessary. The results are the same when I have tried it both ways. I find it wastes product also. But again that’s my way, people can do whatever they want accords to their own way. 😎👍🏼

@danlc95 3 года назад

It was protocol for a specific type of process, compound, and pad. I believe it was from Kevin Brown's participation in the development of the Meguiar's DA Microfiber Correction System. He also popularized it through his personal process with M105 on foam, and later (after the system was formally introduced) microfiber pads. Some of the newer lubrication systems don't require pad priming as they are more fluid, and carry the abrasives around better. Priming can lead to oversaturation, excessive dusting, excessive heat, difficult wipe off, etc. Even Meguiar's is getting away from priming with their newest compound M110.

@MirandaDetailing 3 года назад

Yes. That’s correct. Plus I believe some people have certain techniques and tricks that work for them, but not for everyone. I’ve learned a lot from Kevin Brown and Larry from AMMO. But then I tweak what I learn to fit my needs and style. 😎👍🏼

@Nick-1992-SRB Год назад

Just a question there dude can Sonax perfect finish by applied by hand ✋🏼 applicator pad to remove light scratches ?

@MirandaDetailing Год назад

Hi. Yeah you can use by hand. But its difficult to remove scratches by hand. But you can certainly give it a go.

@gleeful444 2 года назад

How can you tell if the paint is soft or hard? I have a 2019 Mercedes and A 2021 Lexus SUV

@MirandaDetailing 2 года назад

Hi. The only way to tell is when you start polishing it.

@Blindslim43 3 года назад

Is this the ex 4/6 perfect finish ? If so how’s it compared to the og stuff? I’m needing to replenish but all I see is the ex 4/6

@MirandaDetailing 3 года назад

Hi. Yes its the 4/6 Perfect Finish, not sure about the OG stuff you're talking about. But this stuff is awesome!

@kristips4694 3 года назад

Which is better DA or Rotary for using Perfect finish and cutmax?

@MirandaDetailing 3 года назад

I don’t use a rotary so only DA for me.

@kristips4694 3 года назад

@@MirandaDetailing thank you so much Miranda.✌️

@johnparkerzabala 9 месяцев назад

Sir what is the reading numbers? Mine is a 12 year old and it reads 4.8 Thanks so much 🫡

@MirandaDetailing 9 месяцев назад

Hi. You mean what do they mean? if so check this out. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GtcuZMcDJhU.htmlsi=oJvTv3dDBgnddHgQ

@Bruno-oj3zb Год назад

Can I use Sonax Perfect finish for wood finish? after I finished spray painting, for " piano gloss finish " ?

@MirandaDetailing Год назад

Hi. Sorry I don’t understand what you’re asking. Do you mean you sprayed over a wood finish?

@Bruno-oj3zb Год назад

@@MirandaDetailing Hi, I meant after painting wood with regular paint, can Sonax be used to give it that shine? .

@MirandaDetailing Год назад

Regular Paint? Sorry not sure exactly. depends on the type of paint and the finish of it when dried. I don't use this on wood so I wouldn't really know.

@bfgaming2624 2 года назад

Hi. I used perfect finish today and even though it was very good I was getting a lot of dust coming from it. Is this normal, or am I doing something wrong? Today was my first time machine polishing. Also do you not have to use a panel wipe after polishing with these products? Thanks.

@MirandaDetailing 2 года назад

Hi. Was it hot or humid out? How much product did you use? It also depends on your pads. Are they new pads or used and cleaned?

@bfgaming2624 2 года назад

@@MirandaDetailing It was about 60 degrees and cloudy. I used 4 pea sized dots to prime the pad then 3 same sized dots afterwards. I was using brand new pads I got with the polisher I just bought. I'm guessing they aren't expensive ones but the were soft and thick. Any ideas?

@MirandaDetailing 2 года назад

Mmm interesting. I have had some polishes dust on me that people claim don’t dust. Sometimes it’s just weird variables that can’t be controlled. You could also try misting water on the pad, very little mist. It helps keep the polish from drying out. But sometimes dusting just happened. Also blowing the pads out after each section helps.

@bfgaming2624 2 года назад

@@MirandaDetailing Thanks. I have bought some more expensive pads to try them out. And I will try misting the pad if it continues. Thanks again. Much love from Scotland

@MirandaDetailing 2 года назад

You’re welcome sir!

@MiataPower96 Год назад

Do you know if Sonax Perfect Finish can be used over top of PPF?

@MirandaDetailing Год назад

Hi. Yea you can use pretty much any polish on PPF as long as you don’t use pressure or do long slow passes that can build up heat.

@MiataPower96 Год назад

@@MirandaDetailing ok thank you!

@J1Z06 3 года назад

Is the orange pad similar to a ccs orange pad? great video!

@MirandaDetailing 3 года назад

Hi. Yeah it just doesn’t have the small dimples. I can use either one and the get the same results. Great pads.

@J1Z06 3 года назад

@@MirandaDetailing thanks so much for replying. never used any sonax products YET! i have perfect finish, cutmax and cut and finish. looking forward to trying them. the weather has been great in connecticut the past few days. finally!! i hate winter. thanks again.

@J1Z06 3 года назад

I don't know what I did wrong.... I tried Jescar Correcting Compound ad Perfect Finish with lousy results. Flex 3401,orange ccs pad...4 pea sized dots. By the third pass,stuff was flying off the pad like crazy . I tried a chemical guys pad as well(orange) along with an orange force pad. NG. Perfect Finish did the same thing with a new chemical guys white pad...4 dots,force white pad,and a ccs white pad . Pads are 6.5 inch. Vehicle was a 1999 Honda Odyssey. I switched to 3DOne/ccs orange pad ..zero issues. Any ideas or thoughts on why stuff was flying off the pads? Thanks!

@MirandaDetailing 3 года назад

@@J1Z06 Woah that's weird! Was it foam particles or polish that was flying off? I haven't tried the JEscar Compound so I can't speak for that, but I haven't run into issues with Perfect Finish before. Maybe it could have been the pads that were doing something weird.

@J1Z06 3 года назад

@@MirandaDetailing Definitely foam particles. I tried Perfect Finish again on a brand new ccs 6.5” white pad. I loaded it up pretty well. Zero issues. I guess the four dot method doesn’t work “For Me”. The level of gloss is crazy. Great product. I’ll have to try priming the pad with Jescar. Thanks for replying, Phil!!

@Me-key 3 года назад

can i use this using DA polisher?

@MirandaDetailing 3 года назад

Yes. We only use DA polishers.

@Uknownkozzy Год назад

Do the cutmax cut better than Jaz price last cut plus ???

@MirandaDetailing Год назад

Hi I haven’t used the Last Cut so I can’t say.

@Uknownkozzy Год назад

@@MirandaDetailing somax cut max or oberk or koch ?

@DanIel-ep4qj 3 года назад

How's the dust level Phil?

@MirandaDetailing 3 года назад

It dusts a tiny bit I control that with a little mist of water on the pad sometimes.

@g1an_nis 2 года назад

How much rpms as an one step ? The perfect finish

@MirandaDetailing 2 года назад

Hi. Do you mean what speed do I ran the polisher for a one step? Usually about speed 5-6

@g1an_nis 2 года назад

@@MirandaDetailing same speed compound & polish ?

@MirandaDetailing 2 года назад

Yeah pretty much.

@g1an_nis 2 года назад

@@MirandaDetailing thank you very much

@zzo28 11 месяцев назад

@@MirandaDetailing how many rpm is rupes speed 5-6 ? About 4000-5000? Its ok with cutmax 6/3?

@larrysims3878 3 года назад

How many MF pads did you use on this car??

@MirandaDetailing 3 года назад

About 8 or so.

@marioskosmidhs9454 3 года назад

We love them in europe...and a lot cheaper than USA

@marioskosmidhs9454 3 года назад

And if you want close performance of PF but to save some money try sonax ex 04-06.

@tundrawhisperer4821 3 года назад

marios kosmidhs so are you saying there are two versions of the Perfect Finish?

@TheCeki1982 3 года назад

Indeed. We use Sonax in Europe since many years. The PF is the perfect allrounder. A Belgian.

@marioskosmidhs9454 3 года назад

@@tundrawhisperer4821 supposed that ex 04-06 is designed for DA, such as ex 05-05 witch is da version of cut&finish. Ex 04-06 is very close to performance of PF ...not...equal ....but cheaper. Maybe i can help someone with his info

@tundrawhisperer4821 3 года назад

marios kosmidhs well…doesn’t realize that! I want the good stuff. The Perfect Finish in the original formula then. I’ll need to seek this out. Thx

@-curedetailing2162 3 года назад

Thank you for introducing a good product. But the worker's skills seem more important.LOL

@MirandaDetailing 3 года назад

Very true! I can do full paint corrections with meg's D300 and M210 and it will come out the same. But trying other products to see how they preform is enjoyable also.

@larrysims3878 3 года назад

Miranda Detailing Do you foam or MF when using 300?

@MirandaDetailing 3 года назад

It depends on the paint. Usually for paint corrections I use the MF cutting discs. But sometimes the orange foam cuts really well also.

@garcia5986 3 года назад

@@MirandaDetailing the problem is the fkg ''dust'' sonax dont have dust

@MirandaDetailing 3 года назад

@@garcia5986 Interesting, I dont really have that much of a problem with dusting, Some compounds will, but I just mist either a little water, or a polishing pad conditioner to help with that.

@nikosbn7079 2 года назад

Can i do it with the hand???

@MirandaDetailing 2 года назад

Yeah you can. But it’s not as effective as using a polisher.

@nikosbn7079 2 года назад

@@MirandaDetailing my friend what i have to use to do it with the hand? This sonax and what else to rub the cream? Can you be more specific?

@MirandaDetailing 2 года назад

Well it best explained by this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cr-hx5pGFUM.html

@nikosbn7079 2 года назад

@@MirandaDetailing if you khow, whats the difference between the polishes with silicone and the others without silicone??

@MirandaDetailing 2 года назад

The polishes with silicone tend to fill more then actually remove the swirls.

@hakman239 3 года назад

Try perfect finish with rupes yellow pad Iv used Koch chemie f6.01 found its better then pf the Koch will remove p2000 with rupes yellow pad it claims to remove p2500 it will remove p2000 I tested it another guy on yt did the test as well

@MirandaDetailing 3 года назад

Cool. I don’t have any Koch Chemie products yet but I’ve heard they are great.

@hakman239 3 года назад

Miranda Detailing they are Iv got h9 f6 and m3 in 1l and 250ml only used h9 And f6 h9 is heavy cut can remove p1200 use it with flex purple pad it leaves a very high gloss like a one step

@MirandaDetailing 3 года назад

Nice!!

@danlc95 3 года назад

How is the wipe off of the Koch polishes?

@hakman239 3 года назад

@@danlc95 easy

@koioo2 3 года назад

# meow manager

@1974gladiateur 2 года назад

Best practice is to prime your pad whatever you use. Pads never prime themselves well that’s why we need to prime them. Cut max was my favorite but not anymore. By priming your pad you get the maximum performance of your pads.

@MirandaDetailing 2 года назад

Nah. Used to do that but found it made no difference at all. Waste of time and product for me. If others like to do that, and think they see a difference is fine, but in the real world I have not seen any benefits.