Painting The Brake Calipers On The Mustang! EASY Brush On Method! - G2 Brake Caliper Paint System 

I just used G2 and after watching other vids- was highly impressed with the product. Key points: I used CHLORINATED brake cleaner. The cleaner G2 supplied is Non-Chlorinated and Non-Chlorinated leave a residue. Chlorinated does not. It is completely clean. Also, like you show, I tossed the supplied acid brush and bought a hobby brush (like a Filbert brush) from Lowes. It made such a difference. It was so much different than some of the other vids I've seen. It was like painting with real, regular paint, similar to paint Bob Ross uses to paint his pictures. I almost didn't need a second coat. No bubbles, no brush strokes. Also, I did it at about 65 degress and mid-humidity. Not cold, not hot, not humid.

That slide was funny as hell 😂 you got my like 😂

Good job!

A soft brush bristle may leave more paint down per coat. Great job!! Gonna do mine now.

My reservation with using the powered wire brush to clean is that if you strip off the anodized or powder coating and don't fully cover that with the G2 Paint, rust will seed and start spreading. I just used the brake cleaner, rag, and Q-tips.

Looks good 👍🏻

They look fantastic! I'm going to definitely give this a try using the same product. I have a 2018 Lightning Blue Metallic so I'm torn between either black or blue paint 🤔

Thay look really good I doing my orange vauxhall mokka the same colour on the calipers

Nice job. I never seen a brake caliper like on this Mustang's front. Are those calipers hides 2 pistons at the inenr side or one?

I’m thinking of painting the calipers on my TLX. What would be the total time to finish all 4?

Definitely makes a noticeable difference doing those additional coats.

Looks good! How are they holding up?

I'm thinking of using this lot as well. How's the paint holding up?

I bought this kit about 2 and a half years ago, I'm finally getting around to doing it tomorrow 🤣🤣in red, yours looks great by the way 👍🏽

What metal brushes did you use with the drill to clean? Thanks

How many FL.oz of paint to cover 4 calipers for subaru forester?.

Did you change brushes between rounds?

I applied 4 coats of Yellow on the calipers because the paint was not covering. Becoming disapointed with the product. I did have plenty of paint for the project so that was not the issue. The issue was that it did not cover the calipers completely. It just kept bleeding through. Might want to use a primer first.

Great job! Did you put more than one coat on the back of the calipers that aren't seen? I'm painting mine this weekend and was wondering if I should even bother with the unseen parts.

Thanks for watching!! Let me know if you have attempted this! 😀

How long does the paint last once mixed? In other words, can I paint one caliper a day, if that's what I wanted to do, or does the paint need to be used up right away once "activated"?

I’m looking to do this! would you happen to remember how long it took in total for everything to dry before using the car?

I wanna do my calipers too but I’m so scared haha I might just take my mustang to you bro haha

Looks really nice but honestly I would have went with black calipers and orange caliper covers 😝

My mustang came with highlighter yellow calipers but I really want to buy red caliper covers from American muscle

5 coats on 4 calipers with one can?? Also, do your wheel studs stick out past the adapter?? I hope that is the camera angle. eeek.

How's the paint holding up after this time?

You should put primer paint first

The calipers look fantastic, but I’m afraid you got a little orange peel in your finish. 😹 Not that funny, some may not get the reference. Seriously you now have a higher caliber caliper. Why are they called calipers? I like grabbers better. Probably airplane model paint will work for the 2.3T. My Pony is silver, so I’ll just paint my calipers silver. Wait…

Never understood why people want their stock 1piston calipers to stand out.

Q: Why would you waste your time and money with this project? A: Because you would like the world to know that you wasted your time and money on shite brake calipers 😳 Save your money and then buy some decent four piston calipers

How many *wait time* for each coat?