Painting the dual engine go kart

Подписаться 655 тыс.

Просмотров 128 тыс.

50% 1

Check out go power sports for all your go kart needs
bit.ly/2sC3WLT
ratherBwelding merchandise
bit.ly/2PF21Vf
Follow me on Instagram rather_bwel...
The parts I used in this video:
sunf tires
amzn.to/2DpaFiR
22 mikuni carburetor kit
bit.ly/2AHdKsK
stage 2: 212cc tillotson performance kit
bit.ly/2D2SaQN
60 tooth sprockets
bit.ly/2SR4JnW
9 tooth sprocket
bit.ly/2FuQzVw
offset flywheel key
bit.ly/2D2UjMl
Tillotson electric start engines
bit.ly/2QzTy1E
V-tread front tires
bit.ly/2MGCLLE
V-tread rear tires
bit.ly/2BrCVCu
22x10-10 tires
bit.ly/2LhOMDn
8"wheel rims
bit.ly/2wbtEbR
live axle hubs
bit.ly/2OQLrwH
1" axles
bit.ly/2MGN2ry
axle bearing kit
bit.ly/2wbAazf
brake disks & calipers
bit.ly/2Byanay
brake disk mounting hub
bit.ly/2vT2Zkq
engine mount
bit.ly/2ByaZNo
torque converters
bit.ly/2MwC9Zd
rear shock assembly
bit.ly/2MX6L6s
front shock assembly
bit.ly/2vWplSe
steering wheel
bit.ly/2BqsqPM
steering kit
bit.ly/2OS7HGz
engine performance kit
bit.ly/2MyzDS1
headers
bit.ly/2OLwaNu
mufflers
bit.ly/2MyB17b
driver seat
bit.ly/2MmUOXT
LED light bar
amzn.to/2CzNMZI
parking brake leaver
bit.ly/2znJN08
challenger X steering gear
bit.ly/2Qetsof
battery
bit.ly/2TIr73M
Music by Epidemic Sound (www.epidemicsound.com)

Развлечения

Опубликовано:

8 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 315

@NoNeedForaName734 5 лет назад

With as much rust as you grind off, it might be time for a blasting booth... lol

@jonathangottschalk7795 5 лет назад

you could add small LED's next to each kill switch running off of the coils to tell when and engine dies

@232Stangpwr 5 лет назад

Damn saw this after I commented lol

@eugenerussell8518 5 лет назад

Exactly what I was going to say

@moto4life1 4 года назад

was going to say run 1 cheap hourmeter/tachometer to each engine to get both engines in sync with each other

@Toast-fd6fx 5 лет назад

I'd like to see you build a 4 wheel drive kart so you can pull things without getting stuck lol

@nicholaspap7197 5 лет назад

Mc Lingo on the 2 seater he should add a trailer hitch so he can move his trailer around 🤔 I think it would be cool

@RobertPerrigoOkiechopper 5 лет назад

With what you spend on rattle can paint and a tad bit more you could have a nice paint gun. If you like, I'll send you one. It's a good classic one. Just let me know .

@josephfox1192 5 лет назад

You could always put a dummy light on the dash for each engine that would go out when the engine dies, Thanks Again for the great content Joey From Statesville NC

@shanek6582 5 лет назад

Love the pieced together floor board, it’s mad max as hell!

@greasybearing2049 5 лет назад

Maybe you could put a bright, small led near the start buttons for each engine and hook them up to the stators somehow so they are lit when their respective engine is running?

@kjuyfif 5 лет назад

Looks and sounds awesome!!!! Great job!!

@josephfox1192 5 лет назад

You built a rotisserie to paint the go kart but you use spray cans I love it

@ActivityPhoto 5 лет назад

With no primer too boot.

@tj84vinnie 5 лет назад

That smile says it all, amazing transformation, love it.

@andreasiliopolos5540 5 лет назад

Look at 15:01 how big the vf1000 buggy tires are in comparison with the dual engine.... That thing is going to be a BEAST

@patsullivan9399 5 лет назад

Before you know it he'll be building big-block rock bouncers ;)

@andreasiliopolos5540 5 лет назад

😉

@Codyjames83 5 лет назад

Just gotta say I freaking love your videos keep doing what you do \m/ 👍

@aguyashed1124 5 лет назад

you are really inspiring with all the DIY stuff you do !! keep up the good work man

@Nunya_Bidnez 5 лет назад

one of (if not) you'r dopest creations. A work of art. I got some of those led strips i have been looking to use. on my onewheel maybe.

@34bartm 5 лет назад

Great build. It turn out awesome.

@Fantaman900 5 лет назад

RPM gauge for each engine, so you know which engine does what

@kbakeritsallaboutnobody.5761 5 лет назад

Flaws or not I've always found this go kart innovative. You did something no other go kart mechanics done on RU-vid.

@heimlichhotrods 5 лет назад

Looks awesome 😎👍your builds are top notch 🥇🏆👍🚗💨💨💨💨💨

@manuelmendonca8482 4 года назад

Have to say this independent rear suspension buggy with the two motors to me is the most impressive one to date , AWESOME dude, wish I could buy it from you.

@carlnietoweise4653 5 лет назад

Bro, your fabrication skills are awesome! The way you can visualize things is unparalleled, now ya just gotta learn how to paint! You've got a bright future in the automotive field should you choose that direction.

@MrgnUTube 5 лет назад

I love this one!

@minibikeaction4266 5 лет назад

How magnificent the hands and the mind that controls them.

@wayneclarke4846 5 лет назад

Love a montage 👍🏻

@tstricklin853 5 лет назад

Talk about over powerd have you seen grind hard plumbings new MONSTER? 2stroke snowmobile powerd odyssey , great video and can't wait

@justinlundberg3382 5 лет назад

I know!! It looks like a beast!!!

@jvander115 5 лет назад

T Stricklin it’s Odyssey.. no pickin just saying...

@tstricklin853 5 лет назад

@@jvander115 meh phanettic speller, usually spell check keeps me between the lines but obviously it was useless that time ✌👍

@tstricklin853 5 лет назад

@@justinlundberg3382 an angry beast,it'll be hard to top it but if anyone can it's Rather B ,inch for inch ,he's among the most talented creators here

@paulomootores 5 лет назад

gosto muito dos seus projetos, um abraço

@mxrider2strokebraaap54 5 лет назад

Looks good!👌 Nice video as always

@jameslinbeijing 5 лет назад

awesome, good job

@mikeanthony3986 5 лет назад

Great job.

@probably-a-bad-idea5155 5 лет назад

That’s pretty good. I have a suggestion for the other buggy. You should leave it that metallic colour and clear coat it. That’d look so cleaaan

@feelthepayne88 5 лет назад

That painting spit is a pretty slick idea.

@-DIYPRO- 5 лет назад

Wait a minute that's not the one I was thinking of all week! That's like getting to your favorite show and at the end you see the dreaded words "to be contributed...."

@-DIYPRO- 5 лет назад

Still looks petty sweet!

@keronemclaughlin3205 5 лет назад

Love that beat

@tylicecrookedneck7617 5 лет назад

Thats a sick buggy man

@tjwynn7232 5 лет назад

I can’t wait to see the big gray buggy run

@waltergonzalez3919 5 лет назад

Excelente job .. greeting from Argentina...

@Nunya_Bidnez 5 лет назад

@rather B welding. That's the way we do it. Amazing job young man. The way i do it. lol

@rbdworks4342 5 лет назад

With that much rust, you need to get a 55 gal drum of evapo-rust. It'll do you some good!! Great build, glad to see it done.

@clauslundberg9224 5 лет назад

Mayby use a couple of chepo electronic tachometers to tell which engine is running

@nachinguerpetas1449 5 лет назад

Incredible

@t.j.vanderwalt846 5 лет назад

🔥🔥🔥love from South Africa 💯💯💯💯🇿🇦

@chrisvanderwalt4691 5 лет назад

Ja nee die ou ken sy goed

@kimberlyfuda4295 5 лет назад

I like every single one of your videos

@greasemonkey348 5 лет назад

That's a cool project took a long time to finish you should install two little lights up by the dash then you can see what engine is still running

@chrislangdell117 5 лет назад

Cool machine. As far as runni,g or non running engines you can run digital tachometers in a custom pod. You will know which engine is running. Which one runs stronger. Which engine needs to be tuned.. Etc Etc. All this time you spent grinding and sanding and you went straight to paint. No cleaning degreaser solvent. No primer / sealer I think you will find it will rust pretty quickly. With 15% more effort that finish could have lasted quite a long time. You could also clear coat the hardware to keep that from rusting and still looking crisp and new.

@mcpeake78 5 лет назад

That buggy is a monster.

@mikoajskuza5828 5 лет назад

Jeeez, that could be so good Evapo-rust project xD

@ngk330 5 лет назад

You could add hour meters that have the RPM feature so if one engine dies you could know which one by looking at the rpm gauges

@andrehew5494 Год назад

That's what also make it easier to synchronize both engines

@willstrait7112 5 лет назад

I think it’s about time to build a jump for all of these long travel suspension builds! That would be sweet!!!!!

@scootscoot1958 5 лет назад

You should try to make on of the go carts 4x4 ik it would be difficult but I think u you would be able to do it with how handy you are

@dodgeme1986truck 5 лет назад

It wouldn't be as difficult as you'd think if you used 2 ragb to drive the axleshafts, turned the engine 90 degrees and drove the connecting driveshaft between the ragb with the engine

@mrgmc6314 5 лет назад

I'll buy it as it sits .... you make awesome things.... my only question is on the new one how would you retain the rear independent with just one motor

@ZrubekFamily 5 лет назад

Looks good. You should check out Cross Karts for your next build.

@markflippen9613 5 лет назад

Install some lights on the dash that connect to the spark plug wires almost like a spark plug test light and you will be able to tell which engine is still running just throwing that out there love you videos and your work keep it up nice job

@SuperJLD2005 5 лет назад

The dual engine used to look big until you put it next to the new buggy

@airgunningyup 5 лет назад

you should bring the massive dual seater build in for powder coating.. that would be sick

@ActivityPhoto 5 лет назад

Nope it's not worth that expenses it doesn't work that well as I remember. Although with all the time and spray paint he must have used it may have been less cost.

@osquad1346 5 лет назад

@@ActivityPhoto the one he's building rn he's saying, we don't know how well it works yet cuz he hasn't finished it

@marcelofrota4910 5 лет назад

Aqui do Brasil:sensacional

@Chiavaccio 5 лет назад

Cool! ☺☺

@Motoman714. 5 лет назад

Paint the big new one Red white and blue.

@johnchassie-rideout4927 5 лет назад

Wire a light in the dash for each engine so they are only lit when they are running. Then your know what starter to hit if one of the engines die.

@evanbylsma3902 5 лет назад

The build video is great but I really need some driving footage. I want to see that thing perform!

@andrewshutt2459 5 лет назад

You should do a cold start and ride of all your stuff really like your videos

@davidowen888 5 лет назад

Add some ignition lights for each engine to tell which ones running I think it'll be just fine ! Nice project

@seth6878 5 лет назад

Build a shed where you can keep your karts

@seansgarage3178 5 лет назад

next build sounds like a good idea

@mmarkgraf212 5 лет назад

I had a Ninja 650, That motor has a ton of torque.

@BaronGlacius 5 лет назад

Great design. Would a drain hole for the pan be wise in order to evacuate water that may accumulate during your off road adventures?

@t-townmini4939 5 лет назад

That's a good idea...maybe, a row of lightening holes to remove some weight, too.

@shanek6582 5 лет назад

I couldn’t do it but I’m sure you could figure out how to put a straight shaft on the rear axle and sync up the motors, something with the same idea as a bicycle pedal where it only grabs pedaling forwards?

@tazyt3388 5 лет назад

Mate it came up lookin great wel done have u thought about a little boat to tow behind it just for a dum idea .I built 2 outa junk funny as hell have a look if u ever get bored luv ya work mate cheers

@benhightowerv 5 лет назад

I think that vf1000 (is that right? ) should be painted silver and blue or grey and blue. He excited to see that thing get finished! Frankenstein is amazing! I like the color combo, I want a full independent suspension, 2 motored cart thing. Lol. Friggen awesome

@fergusonhr 5 лет назад

When you were towing that it looked like it needs more caster in the steering brother...it should have followed

@mikkellarsen8715 5 лет назад

U should maybe consider building a shed or small garage where u can store ur wonderful creations, a shame they stand out an just rust when i spend so much time on them, plus them rustin also makes more work for u. But ye the duel engine looks good, if the engines produce power when running u should make 2 red cockpit lamps that lights up when each engine is on and making power. Great work keep it going, if u read this plz abit feedback ;) by power i mean volts ^^

@piercedpothead420666 5 лет назад

Nice job.. I woulda painted the floorpan black tho. Hides the welds better...

@drewalsup9200 5 лет назад

You could utilize the same rear suspension and have one engine by using a chain system like a two into one with the sprockets in the same location as the pivot so they dont stretch when the suspension moves through its cycle

@hillonwheels8838 5 лет назад

Maybe for future projects use some weld through primer to save you all this time of removing all this rust. I hope that primer is as good as they show it on TV I have no idea since I have never used it. I think your time is more valuable than the price of that primer. Looks great though

@jaradwebber1725 5 лет назад

What size are the rod and tubing that you used for the pivots on the control arms? Are they regular steel?

@andrehew5494 Год назад

I would love to see you how you set up the drive for each wheel as it is independent suspension...🤔

@williamhorn4290 5 лет назад

Painting the dual engine go kart is brought to you by "Rather be Hammering" xD

@ethanhuber5360 5 лет назад

What sandblaster were you using? That looked handy

@samthomas3883 5 лет назад

I fucking love the trap music instrumentals. Videos are so fun to watch

@nosyaj007 5 лет назад

Turn the ninja 90° and mount up to a lsd irs diff turning sprockets and chains down to the rear wheels

@randiradio10 5 лет назад

buen video

@BUILDNIGHT 5 лет назад

Dude....that was a TON of work! Can I suggest that next time you just use POR-15 so you don’t have to strip the rust... Really enjoy the vids, as always.

@5_twenty 5 лет назад

He really be doing too much. And he's a one man band. Work smarter not harder!

@kbakeritsallaboutnobody.5761 5 лет назад

I'm waiting for the 4x4 build

@5_twenty 5 лет назад

I think Chris is waiting for RU-vid money. Wanna supply it to make it go faster?

@wendellbutler8202 5 лет назад

Very nice good mud tire mini rock crawler please let us see it happen you the man as well as that big monster in the corner put kiwsiki on it an rear end swap on the green one with daul engine an rock crewler tires

@Zantrop64 5 лет назад

It looks really fun, but it must have a lot of body roll, maybe you should put a harness

@kaseyrose4845 5 лет назад

do a cross kart build with big 4 wheeler tires!! You should also try a little fiberglass too because it's unique

@kaseyrose4845 5 лет назад

Btw I'm a long time subscriber and I really love you're content!

@chadtpetersen 5 лет назад

So roughly how many hours did it take you to sand it all down Nice work!!

@iwantmypot 5 лет назад

10:56 I'd have probably used the chain hoist for lifting the frame instead of lifting it a little at a time. Of course, it was probably faster to do it your way since your chain hoist seems to be packed away. Need it on ceiling tracks.

@westie4ageturbo.749 5 лет назад

Can you put two led’s that run off the stator with diodes that shows that the engine is running?

@gunsandstuff4056 5 лет назад

On the rear end where you put the castle bearings I would switch those out to bushings because when you grease the bearings all the grease settles to the bottom and half of your bearing it’s rusted and ruins it

@broForseNetwork 5 лет назад

How's it so well ballanced

@emfs2016 5 лет назад

Add a led for each engine on the dash board from the Alternator charge output. It will show you that the engine is running.

@feelthepayne88 5 лет назад

Maybe add a couple indicator lights, one for each engine that stays lit while the engine is running. Then you'll know if an engine dies while you're driving.

@allenmckinney9533 5 лет назад

Mount some little LEDs up front and wrap the positive wire around each spark plug wire. That will show which engine is running and which has died.

@Zantrop64 5 лет назад

Something I haven't seen yet and could be cool would ba a 6 wheeler kart

@benespee5321 5 лет назад

It has been done before

@post-leftluddite 5 лет назад

If I made this, I would have made the frame out of 304 or 316 stainless and finished it with a #4 Brushed finish....probably because I finished stainless for a number of years professionally and have been obsessed with abrasives to the point of being an abrasives information repository and being knowledgeable on upcoming abrasive innovations. Helpful tip: When finishing metals, even just mild steel, always use Ceramic Alumina abrasives instead of aluminum oxide or even Zirconia, they last the longest, remove material faster, stay cooler and in the end cost you less. Also, always finish metals with non-woven nylon abrasives as these "close the grain" that's been lifted by the traditional abrasives and this will prevent particles from collecting in those grains and thus oxidation of those particles.

@jaysonjames6736 5 лет назад

If the engines have charging system (looks like it) connect a light to it but, put in a diode so you only get power from the charging system while it is running and not from the battery. I think there should be one already the so the battery doesn't back feed and as far as the different speed idles 2 gas petals.

@ronsafranic5177 5 лет назад

It would look even better if the red part of the seat was a matching green!

@t-townmini4939 5 лет назад

Run duel tach/hour meters to monitor the engines. The cheep ones on eBay may not be accurate but they don't need to be to tell which engine is running or not.