Panasonic TX-43GX550B No picture, No backlight, realtime Repair 

Than you so much. Following these instructions, I got to the backlights to find that on a previous repair by a TV engineer costing £100, he had done exactly this and added new backlights to the bill! After a year or so, TV started showing the same problem so I was reluctant to spend another £100. Re-did the soldering plus added some wire jump leads across one that had been damaged and TV now working again. Took some photos along the way to remind me where all the leads went. Thanks again.

Awesome Tv engineer, just followed the in depth video and now we have a working tv, thanks

I'm blown away right now!!! I've been looking for a TV for my flat and just found this exact model out by the bins. Took me a bit more than half an hour lol but I did exactly as you said and now have an awesome working Panasonic TV!!! Thanks so much 🤯

Thank you, I didn't re-solder our LED strip contacts, I cleaned them with contact cleaner, also where the power wires were soldered onto the strip, I re-soldered those as they didn't look too clever, our TV is now fixed :-)

Thank you for the Help. You Video supported me and my dad to fix our issue with my TV. Big Thanks and greetings from Germany!

Thanks so much for this video! You've saved me so much time and money. I was getting no resistance issues between the last two contacts until I slotted them back in. Took it back out, resoldered all connections and it works a treat! Legend, thanks!

Thanks👍, I repaired my TV according to your instructions!

This works on the 49 inch same model. Grate video keep them coming. Thanks form the UK.....

hey, we fixed our tv by following your instructions, thanks a lot

Thanks for this video! Worked a treat.

Great job! Thanks a lot. Fixed my TV exactly as described 👍

Thks heaps. I did exactly as you said & voila my tv works again. Top vid, easy to follow.

Thanks a lot! Backlight is working again!😃

Fixed my tv following this video so thanks a lot. My backlights didn't come on after soldering when i tested, but once id put it back together it was working (after i had to take it apart again because the backlight worked but i hadn't reconnected the screen properly lol)

Thank you very much !I have tried so many times to fix it untill figure out where the problem is coming from

Nice jobs cheff

nice job, do you think that TX-43GX555E has the same repair procedure to fix the same problem? (no pic, no backlight but audio ok) . Thanks

Amazing! thank you

Fantastic thankyou

Thanks!

Hello I been watch your utube did you soldering with flux paste what is called ? I got the same problem your tv no picture but sound is fine ! and am going find out if I can fix it 😊 thanks

Hi, a friend of mine asked me to try repairing his Panasonic TX-40DX600E that stopped working after a power outage during a storm. Nothing happens when you plug it in, not even the red standby led turns on, no response at all. Any tips? Thank you for your time

Hi, i have the same unit, once i turn on the tv, it has the text that i can see clearly on a closer look. but it is still black screen. do you think its the same problem with one you fixed here?

I have a Panasonic LED model no-TX-43FX555B and I don't have or know the power cable or where to connect from the TV to the main socket. Anyhelp would go a long way . Thank yiu.

@WeFixTvs Hi, my Panasonic TV's green led flashing 29 times, then turn into red after 3 sec. (after 16 flash the background light flash up for a second , then screen is black again while still flash another 13 after switch from green to red ) Model number: tx-48ax630b, error codes valid until 13 flash. The problem shown on your video looks very much identical with my issue. Can you give advice please? Thanks

Hello, I done the led replacement on lg 43uh610v following your video and there is no backlight whatsoever now leds we’re lighting up blue prior to me doing the replacement now there is no light any suggestions ?

I need someone who can help me fix this exactly on my TV, it’s just not coming up

ｐｒｏｍｏｓｍ

Thanks!