Panel Max Clamping System / Setting It Up Using It

Подписаться 20 тыс.

Просмотров 28 тыс.

50% 1

SUPPORT MY CONTENT:
/ bruceaulrich
I installed the Fulton Panel Max Glue Press in my shop so I could glue up large panels and table tops and not use up floor space. This clamping system takes advantage of the wall space and applies pressure in 4 directions.
TOOLS & MATERIALS: (affiliate links...shopping using these links helps support my channel & costs you nothing)
Panel Max Glue Press: www.ptreeusa.com/clamp_panel_...
Track Saw: amzn.to/2XJCrDz
Track Saw Rail: amzn.to/2Xu5uKR
Tripod I Love: amzn.to/2wT3vmk
Rode Wireless Mic: amzn.to/2RCJo2C
iPhone Tripod Holder: amzn.to/3eyXkFf
Camera: amzn.to/3hT7mnA
Glowforge Laser Engraver: Save up to $500 when using my link glowforge.us/r/GwnI7W
MY PODCAST: WE BUILT A THING
I do a podcast with a couple of other RU-vid makers called WE BUILT A THING. Look for it in the app store of your choice or stream from the link below or on Spotify!
webuiltathing.libsyn.com/
FOLLOW:
/ brudaddy
/ webuiltathing
/ bruceaulrich. .
/ brudaddy
www.instructables.com/member/...
WRITTEN ARTICLE FOR THIS PROJECT:
www.bruceaulrich.com/
Help me grow my channel!
-Thumbs up: tells RU-vid you liked it and they show it to more people
-Subscribe + bell icon: Notifies you of new videos immediately
-Share the video: This really helps me get in front of new people
THANK YOU FOR WATCHING!
Music:
Epidemic Sound
#tabletops #customfurniture #workshop

Хобби

Опубликовано:

20 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@rodpotts2666 2 года назад

It’s nice to have a live in shop helper on call.

@BruceAUlrich 2 года назад

Sure is! She’s great!

@bobbyirvin2712 4 месяца назад

Beautiful clamp that you made.

@Scotty476 2 года назад

I have this system and it works great. A couple of tips I have found. I ended up writing numbers on all of the holes to make it easier to make sure the bottom pieces were all in the same position. I also used some small bungies to keep them closed when not in used. I also use extra clamps like you did.

@BruceAUlrich 2 года назад

Oh, great tips! I will definitely be implementing them. Thank you!

@lakesidewoodworksky563 2 года назад

Any way to send a pic of the bungies? I have 2 sets of these clamps and we also marked them with numbers.

@naziermarthinus2851 2 года назад

@@BruceAUlrich thanks for the tips,I am struggling to secure the top fittings to the Aluminium rails ,is there a way of sliding them and do you use the first opening?

@EthanCarterDesigns 2 года назад

Such a cool system! Great video as always bud!

@BruceAUlrich 2 года назад

Thank you very much!

@GregsGarage 2 года назад

Looks like a great system Bruce!

@BruceAUlrich 2 года назад

I’ve used it a few times and it is!

@JonPetersArtHome 2 года назад

Very cool Bruce! Ive never heard of those clamps.. good space saver!

@BruceAUlrich 2 года назад

I love being able to clear up space on a workbench or floor space. Thanks, Jon!

@fosteredwoodworks 2 года назад

Great video, Bruce! I can imagine this would be super helpful, and would save on stress and space.

@BruceAUlrich 2 года назад

Thanks so much! It does save on stress so long as you don't try to glue too big of something while your glue is setting up. ha ha. Glue ups can always be stressful.

@roblewisjr2 3 месяца назад

Dang, that looks not user-friendly at all. When I first saw this system on Amazon the first thing I thought was that the top knobs look really difficult to work with, especially when under the pressure of glue beginning to set up. You convinced me to not get them. Thank you so much for a great video.

@BruceAUlrich 2 месяца назад

Glad you enjoyed the video. They're not that bad and hard to use...I'm probably just awkward.

@Wordsnwood 2 года назад

The old shop! You need to stop "playing" over at those other guy's shops and get your own put back together! 😁

@BruceAUlrich 2 года назад

Yep! ha ha. It's all a process...trying to do all the work and it is just taking some time to set stuff up.

@DesignCraftWorkshop 2 года назад

Definitely could've used this for my currently project! That's a really cool system and I wish I had more shop space for it. Will get this for the next shop

@BruceAUlrich 2 года назад

It’s handy if you have the room!

@nywoodworx 2 года назад

Cool video !!! I need these in my life 👍🏻👍🏻

@BruceAUlrich 2 года назад

Thanks, Al! They’re very handy!

@MCsCreations 2 года назад

Pretty interesting system indeed, Bruce! 😃 It seems to work great! Stay safe there with your family! 🖖😊

@BruceAUlrich 2 года назад

Thanks so much! I've used it a few times and it worked out really well for those panels.

@ArpadBuildsThis 2 года назад

Nice! I have wanted one of these for a while!

@BruceAUlrich 2 года назад

It’s a pretty cool system!

@user-fb2ro9wx5o 6 месяцев назад

I have the same clamping system. I use the bar clamps at the bench to hold the piece together, then lift it into the wall camps.

@BruceAUlrich 6 месяцев назад

Oh that’s a good idea!

@Hvn1957 2 года назад

Interesting! Enjoyed the look at that product. We usually cut our titebond just a bit, to extend its set time. I know the practice is generally frowned on, but we’ve never had a glue up let go. We also choose to forego any joinery. Nothing wrong with using biscuits or such, but for a production shop they just add time. We have a ton of old 6’ bar clamps, lay out the glue ups on horses, throw on the clamps, pivot them off the horses, and go to the next set. They all just lean against a wall until they’re dry. 😊 Great video! Subbed.

@BruceAUlrich 2 года назад

Hey, that works too! Thanks!

@uknowulikethat4042 2 года назад

Seems like a good system to have

@BruceAUlrich 2 года назад

Very useful to use the walls and not take up workbench space!

@dwwoodbuilds 2 года назад

Nice video! Interesting system and I can see how useful that would be if doing lots of panel glue ups (esp not using precious workbench/table space!). Now you get to reinstall in your new workshop! :)

@BruceAUlrich 2 года назад

Yep! Very true! Using the walls is a great use of space

@loribeckham7698 11 месяцев назад

I love it...I'm buying it!!

@BruceAUlrich 11 месяцев назад

If you do a lot of panels, it can save some serious time.

@stuffsethmakes 2 года назад

interesting product! i used something similar a few years back when i did the Jory Brigham class, but it was a little bit different than this. this one looks like it takes up less space for sure 👌🏻

@BruceAUlrich 2 года назад

Anytime you can use the walls and free up floor space, I call it a win

@bytesizedengineering 2 года назад

That's cool! You must have installed this before you knew you were moving!

@BruceAUlrich 2 года назад

Yeah, I sure did. Ha ha

@Surannhealz Год назад

Saw this product on Amazon (after seeing something similar at Rockler). Thanks for making a video showing how it works.

@BruceAUlrich Год назад

Glad you found it!

@TwoMooseDesign 2 года назад

Ohhh nice I haven’t seen this before!

@BruceAUlrich 2 года назад

You could use them for sure with those large clocks you do!

@ivanscountrymusicandcars2357 2 года назад

I just did my first glue up in this system. It was a 20 inch board out of 4 pieces. Super simple. However I had the clamps positioned to low. No big deal I got it out and back in but on a big glue up that would be very frustrating. Nice save.

@BruceAUlrich Год назад

Thanks. Yeah, I have learned my lesson that. Need to prepare ahead of time a bit more and for large ones, I like doing it in two stages so the glue doesn't dry out on me.

@bm4159 Год назад

Hi Bruce, I had my doubts about this system and wanted to buy the Plano, but seeing your video, I ordered directly these Panel max system, much cheaper as Plano. Thanks for sharing, I cannot wait getting these. I have a huge project, for 2 kitchens I want to glue all cabinets ,doors, fronts and top with solid wood instead of these laminated plywood parts! btw I am living in the Netherlands

@BruceAUlrich Год назад

I think you'll like them. If you're doing really wide panels, you might consider doing them in two different glue ups. It gets a little hectic to get a large one done and in the clamps before the glue starts to dry.

@crossgrainwoodproductsltd9230 2 года назад

Hey Bruce, got here from the Jennie & Davis blog. Just out of curiosity, did you contemplate building your own panel glue-up - clamping area? I will have to look into the setup you have and compare costs and time. It looks super handy and you don't lose a horizontal surface like you do with conventional clamps.

@BruceAUlrich 2 года назад

Panel glue ups were always done on the floor or on a bench before I saw this system. Having it up on the wall is a huge space saver!

@johnschmid2566 2 года назад

I have a Plano system which is a carbon copy of the Fulton. It seems to work well for edge joining like you did but not so good if you are laminating to make thicker stock. I'm thinking this clamp is too lightweight to squeeze the bars together. I'm interested in the Frontline 4way clamps which appear to have a better mechanism for pulling the bars together (but at twice the price).

@BruceAUlrich 2 года назад

Hmmm...interesting. I've never tried to laminate stock together to make thicker with it.

@goali3903 2 года назад

Did you use a time machine to install this? Glad you have some old footage to keep things going. Hope your new shop setup is going well!

@BruceAUlrich 2 года назад

Ha ha. My time machine was unpacked first!

@derekjspence Год назад

Hi Bruce. I see it is over a year since you started using this system. Can you give a quick summary of the pros and cons of this that you have learned. I would especially be interested in whether this is as effective as using cauls to reduce/avoid bowing during glue-up. Thanks very much

@BruceAUlrich Год назад

I have not been using it in my shop recently. Don’t have room for it at the moment. My friend has a production shop and used it all the time. It does a pretty good job at keeping them flat without cauls. He often takes countertops out of the clamps and straight to sanding.

@johnrice6793 2 года назад

Do you find now the clamps are effective as initially thought - that is, do you recommend them? I’ll add, video is nicely done.👍👍

@BruceAUlrich 2 года назад

Thanks, John! I will say, I can probably get them tighter and get any error out of them a little easier with just parallel clamps, but for the reason that it is on the wall and not taking up floor space, and then it can dry there out of the way, I would say it is a good way to go for large panels. I know a production woodworking shop that does a lot of countertops and tables and they use it all the time...way more than I do.

@johnrice6793 2 года назад

@@BruceAUlrich Thank you. The wall mount would be a hellofa nice feature.

@7agte.ke30 Месяц назад

Hey Bruce, do you still use these clamps? If so, what are your thoughts 2 years on?

@BruceAUlrich Месяц назад

I actually don't. I moved shops/states a couple of years ago and have not had wall space for them. I've been in a much smaller shop. They do take up a good bit of wall space, but they do work well if you do a lot of countertops/panel glue ups.

@stanfromcleveland7313 2 года назад

Where did you buy this is it cost effective thanks

@BruceAUlrich 2 года назад

I got it from Peachtree Woodworks. Yeah, I feel like it is reasonable.

@piousminion7822 5 месяцев назад

Why not remount it rotated clockwise so you can swing the arms open like a door instead of lifting everything up and over it? ;)

@BruceAUlrich 5 месяцев назад

Not a bad idea. I feel like you would fight a lot of gravity that way.

@nickk8670 8 месяцев назад

Seems like a good but somewhat frustrating system to use. I can see the glue setting before all panels in place

@BruceAUlrich 8 месяцев назад

If you don't watch it, I could easily see that happening. Definitely easier with two people. And I found it was easier to glue in sections, rather than trying to do an entire tabletop in one go.