Paramotor Humble pie served with busted props!! Fixing carbon fibre props.... 

Great repair!

I like the repair product. I think you can do the same thing with crazy glue and backing soda. Did you balance the prop. What I do is take the red (positive) protector off a 12V car battery. This fits perfectly in the center hub of the prop. Put a string right through the center of the red cap and hang it from something...eg. a doorway. To balance sand or add paint...if it need more you can drill a small hole in the prop and inject some glue into the prop's cavity. This works great.

Good job! Excellent repair and no trophy to hang on the wall of shame!

GREAT!...So it is possible...THANKS!

I have the Hadron 3 and your wing did exact same to me. I applied my 20 year forward launch technique and wing just continually folded either in the middle or tips around my ears. Resulting in 5 lines being chopped. First time ever. Then spent half a day practicing and 15 failed launches. Have since found you did very much depends on the trim setting. For me it was on zero. Once in the air didnt like how twitchy it was and slightest gust and wing all over the place. You are very right that this wing is very specific to the days weather conditions. Based on your review and that of many others I have a Luna 2 on order

I just bought an H3 22. It should be here in a few days. I'll be sure to spend more time kiting than I usually do with a new wing. Thks for your honest comments.

Good job!! Thanks for the "how to" video!!

I had to do the same to me Helix prop. I think the tips are now tougher than before

So handy, Luv. Scrumptious vid in it's presentation. The guitar music in the end was almost certainly a version of Bron-Yr-Aur from Zepplin's Physical Graffiti. I think then it was Custard Pie that was served up. 💋💋💋

Reminds me of when I was a teenager in the early-mid 90s. My old man and I were flying from Darwin to Adelaide. We landed at a little place called Olympic Dam which I think was our last stop before getting to Adelaide. It was a single strip airfield with a very strong cross wind. We were continuing to side slip even with full opposite rudder and dipping the wing into the wind. Eventually the old man decided he need to get us on the ground as we were getting very close to a wind break on the right of the airstrip. We hit the ground hard and bounced twice. Once we had stopped we could see we had suffered a prop strike on the aluminum prop. Which bent about 12-15cm of the tips on both blades. There was no LAME at the airfield so the old man decided to continue to fly the aircraft to Adelaide. He called up one of his mates who drove up and picked me up, plus everything we were carrying onboard. Whilst we waited for the friend to drive up, my old man calculated how much prop he would need to generate the thrust to fly the aircraft unloaded aside from himself and fuel. Then he cut the tips off each end of the prop. Made sure he cut the same amount off each end. Ran it up and was happy. He then flew back to Adelaide, following the road so we could follow in case he needed to make an emergency landing. He arrived no problem. However another pilot that was at Olympic Dam saw what we were doing and called CASA (Civil Aviation Safety Authority) and dobbed us in. They were waiting at the airport when he landed and gave him a summons to appear in court. He was given a $20k fine for flying the aircraft after an incident without having it inspected for damage by a LAME. I still have the news paper article from the event somewhere around here. I believe it's title is "The pilot that pruned his prop and continued to fly", has a photo of the old man coming out of the court house.

Dang, didn't know that wing caused you to bite a prop...too bad. Good thing was fixable. That's why I stay with the 125cm on my pheonix, way more clearance that way with the cage flex.

Yep, Q-bond is the perfect repair tool for those props. did u try to re-balance it?

$500, wow. I'm going to see what it takes to make a couple of fiberglass molds.

Jerry, I thought my air box was moving back in flight by air flow & contacting the prop. One day, while running it at full power while tied to a tree, I leaned over out of curiosity. What I saw surprised me. It wasn't the air box's fault. The Helix prop, at full power, was flexing forward into the air box. Something to consider. I've since added an additional spacer at hub front.

A good cheap way to repair props is baking soda with super glue. Then files... Used it many many times. This seems the same. But if it's this busted, especially at the ends like that? I'd be worried about ballance. Also It's odd to me cage could flex this much into the prop. I know my nirvana cage would never go this far. I tried it on the ground and I don have the force to flex it so far.

That was a great repair job. I’ve had to do a bunch but never the ones that large. How many centimeters do you think you put back on to those props?

Hey bud. Wasnt it that you didn’t keep the risers forward until it reaches 12:00 when trims closed all the way? Its part of the unique technique of the Warp and perhaps the Hadron 3? I know you are knowledgeable on the product but sometimes it helps if a buddy points out the problem, as I noticed in your video...

Looking in from the outside, it seems like your hoop section bent way too easily? No?

Looks like a prop manufacturer gave you a thumbs down. Lost revenue. Good job.

I'm having same trouble taking off on my small trike with my brand new Nucleon 4. It either doesn't go up and gets dragged behind, or goes to the side. I have 10 years experience on Paramania Revo2. Last 5 years I had almost 100% success rate on take off, so I know how to properly line up the wing against the wind. I kited it for couple of hours. Seemed ok with a forward start without an engine. But with the motor it takes me like 7-10 attempts to get up. I have no idea what I'm doing wrong. Tried with different trim settings, tried to pull slowly, to pull hard. Don't know. Even overturned my trike once when I was frustrated and tried to overpower the wing flying in the side. Lucky, my cage is strong enough (double hoop) and didn't break the prop. Now rebuilding my old Moster. It gives now only 7800rpm instead of its usual 8200rpm. But flew my Paramania with Solo few times. 16hp! Next time will setup a camera on the ground to see what i'm doing wrong.

So I take it this one's hard to launch as well like the hadron XX?

Was it too much riser strap pulled in?

Humble pie............don't care for it much! Seems like I am forced to eat a piece, every few months!!

How did you check the balance?

Do you recommend someone awaiting training to buy a brand new beginner wing and kite it? Would this help or hurt?