Parker TG Hydraulic Motor Outer Bearing Replacement for a Dingo TX420 

Just what I needed. A look inside before I pull one of these apart. I have end bearing play in a TG series motor. The unit I have is a Ross torqmotor, now Parker. The service manual can be downloaded via a quick search for Parker TQ service manual. All the part numbers are in there along with the layout and options. There is a full description of what grease goes where. Identification of part numbers is a bit tricky but bearings are common to all motors in a series. The numbers are Parker part numbers only. There is no reference to sizes etc should you try to source an alternative part. Good video. Appreciate the effort and the price links too. Though I'm in the UK. Good luck to other fixers.

I wish someone would show how to remove the old bearing.

The biggest step in the video is missing which is removing the dang outer bearing! I couldn't do anything but break it apart and stick a long screw driver from the inner side and carefully pound it out. And the bearing itself is stupidly expensive for a bearing. My Parker TG had a FC66362 bearing which is the exact same bearing used in vehicles for axles and things. It cross references to National Bearings part 5707 (same for similar brands) and it's under $25.

What was the measurement of that bearing?

What was the part numbers for the seal kit and bearing ??

do you have part number for bearing? ive been searching everywhere cant seem to find one.