Excellent! Thanks for this video. I thought that 27 euros (Kaufland) was too little to be worth anything, but for this amount and thanks to this video, in three years of warranty it will satisfy more than my occasional needs for cutting and sanding small profiles from metal and plastic.
Супер зле са тези, 2 съм връщал преди време заради дебалансирани цанги. На по-ниските степени тресат яко. От клипа ти виждам, че все още са такива. И още нещо много важно, задължително ги ползвайте със защитни очила, защото дискечтата имат навика да се пръскат.
Факт. Получаваш качеството, за което плащаш. Няма как Dremel 8220 да е около 250-300лв, а това да струва само 45лв. И задължително всички режещи инструменти със защитни очила. Всъщност не съм сигурен дали е в класа на 8220 или е по-скоро Dremel Lite, но отново разликата в цената е в пъти.
This is a very light duty tool. Intended for model & jewelry work, it is not a chop-saw. All abrasion devices throw off tiny bits of rock, and can definitely damage your cornea if you don't use eye protection. If one of the fragile grinding or sanding disks separate at high speed, loss of eyesight is definitely possible, not to mention the need for surgical removal of shards from your flesh elsewhere. This is a bad demonstration of how to hold the tool and work piece for even reasonable control of both.
Благодаря за видеото! Взех си същия Dremel с идеята да го пробвам за обработка на камъчета, но след всички коментари за пръскащи се дискчета и прочее май се отказах.. Разбирам, че явно е нещо нормално за подобен тип уреди и при всички положения трябват предпазни очила , но дали можете да ми препоръчате подходящ качествен модел за целта?
Aми може да пробвате с диамантено дискче. То е метално дискче с покритие от изкуствени диаманти по края. Със сигурност няма да се пръсне на парчета, но е и доста по скъпо: bauhaus.bg/disk-za-ryazane-proxxon-no-28840/p/30511?search_id=9154922
DANGEROUS TOOL when using cutting disks. First time, I used the tool , I wanted to cut a small piece of pine wood (2cm diameter) , after 1mn the disk broke. I tried a 2nd time, using 2 disks together , they broke after 3 mn, and a piece was splattered on my face, luckily not on my eyes. Lidl does not have anymore the quality they used to have years ago
All cutting tools are dangerous. Don't be fooled by its size. No matter what cutting tools you are using - always wear protective equipment - glasses, gloves, hemls.
@@onetouti You go on about the poor quality of their cutting discs and yet you are the damned fool that used them without eye protection! I don't need to be told such a thing, I want to protect my eyes....either from well made or poorly made bits of flying, spinning metal!