Part 1 How to sharpen or replace the blade on HFS guillotine paper cutter Hardware Factory store

Подписаться 153

Просмотров 30 тыс.

50% 1

This is going to be a two-part video Jason is going to do Step by Step how to sharpen or replace the HFS guillotine paper cutter blade and red pad. Please watch the video all the way through so you do not cut yourself and how to hold the blade. The blade is still very sharp even when it is not cutting at its best the blade can cause serious injury. The HFS paper cutter is the 12" but would be the exact same process for the 17" the manufacturing for this Hardware Factory Store. Hope this helps you and if you have any questions please leave them in the commits.

Хобби

Опубликовано:

6 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@wendercarloscosta5023 Год назад

Hi, I did the same procedure as you demonstrated. My machine has improved performance.

@mjremy2605 3 года назад

12:05 - Actual blade sharpening begins. Put video speed on 2. Prior to this point is disassembly and tips. I'm surprised there are no leather gloves being used on either hand during sharpening. One slip and you slice your fingers off.

@TheMagicTaco Год назад

Yep! I was thinking the same... just one slip.. yikes!

@zariahspeaks6718 Месяц назад

Great video. Why can’t you sharpen it with it still intact?

@spikel984 Год назад

G'day, just wondering what oil is put on to stop rust? Great video too. Thanks.

@sva7242 2 года назад

thanks for the video, just some info the red plastic thing is called the cutting stick and you and buy a new blade on amazon for about $30.00 or if you have a print shop near you just ask them and they can tell you of a place that use to sharpen theirs and because it is so small it should cost about $15.00 or $20.00, Thanks again for the vid

@sitasilva2233 2 года назад

I have a hard time getting mine to cut 8-1/2” x 11” paper in perfect halves. It always shifts alittle and I end up with uneven stacks :( . Any tips?

@MrStev0z 4 месяца назад

Seems most of them ship like this, you need to remove the panel on the cutting board side and tighten the bolts by the handle very tight. This fixed the issue with mine.

@KramlDesignTV 3 года назад

Thx.

@justmelorij1839 3 года назад

your welcome thanks for watching Paul

@alissaurus03 3 года назад

I lost the screws of my blade. Do you know how could I get replacements? Or the right size so I can look for them at my local Lowes or Home Depot??? Thank you in advance!!!

@justmelorij1839 3 года назад

Kayla, thank you for watching. Sorry, you lost those screws I will ask Jason when he gets home. Thanks again,

@palmagomez2035 11 месяцев назад

@@justmelorij1839 Jackson went for cigarrattes and never come back again.

@tompaste387 Год назад

While you are at it, might as well do it a full bit [not a little bit] LOL 🤣

@joeh773 5 месяцев назад

good instructional vid. except, put the blade on the table with blade edge over the table edge, keep it steady and slide the steel over it, handling the blade like this is asking for trouble. The kitchen honing steel does NOT sharpen anything! It will knock some burrs off that formed on the blade from use so it seems a little sharper, but it will not make the rest of the blade that got dull(er) with use any sharper. That may be enough for some people, but if you want it really sharp again, sharpening stone must be used.

@vongabrielmagpantay4072 2 года назад

What do you call the red thing you turned around?

@granjmy 11 месяцев назад

Cutting stick.

@michaelmacahito5816 2 года назад

Great video :). What is the model and brand of your guillotine? I have an 18inch guillotine and i cant cut evenly on multiple papers as the blade is 2 sided beveled. Its a heavy duty guillotine similar to yours but larger. The blade that you use is one side beveled(one diagonal cut). Im looking for that kind as it will cut evenly to whatever thickness it can. Thanks

@justmelorij1839 2 года назад

My is HFC 12" Guillotine but they do have a 17" one. I got it off Amazon. Thanks for watching.

@marsbeads 2 года назад

@@justmelorij1839 HFS : )

@farahzila7300 Год назад

Mine can't cut 100 sheets. It's so hard for me. Anyone know how to repair it to get 400 sheets cut?

@granjmy 11 месяцев назад

Is it time to replace the blade? Maybe it is dull?

@joelnyanise3945 2 года назад

How can I get one I am in Zimbabwe

@justmelorij1839 2 года назад

I got his off Amazon, if you can try there first if they ship to your country Joel I also know the company has a website look up the company and reach out to them to see if they have any suppliers that ship to Zimbabwe. Good luck

@naridaiohl 2 года назад

can it cut 600 sheets

@justmelorij1839 2 года назад

Honestly never tried

@alotaeric7702 2 года назад

Well I have tried 400 sheets and yes it cuts. But never gone up to 600

@LittleYoki 5 месяцев назад

Ahhhh I bought a new plastic thing right before I watched this 🤦‍♀️

@rameshthiru3609 2 года назад

Hai. Iam interested. This manual paper cutting machine how much amount pls details help me

@justmelorij1839 2 года назад

This is a HFC Guillotine 12" but they do have a bigger one 17" I got my from Amazon. Thanks for watching.

@justmelorij1839 2 года назад

Hello I got this off Amazon it is a HFC 12" guillotine manual paper cutter. They do have a 17" one. Thanks for watching.

@user-ep7dp7pc4w 6 месяцев назад

How much

@rjrafaeldp1116 Год назад

how much this cutter philippine money im interested

@janeil012109 11 месяцев назад

4 to 5k

@halukalpdemir2482 3 года назад

Blade is more expensive than the guillotine itself. It is ridiculous

@justmelorij1839 3 года назад

they are pretty expensive that is why we shared this video to let people know you can sharpen the blade. Just be careful because it is still sharp learned the hard way here. Thanks for watching.

@granjmy 11 месяцев назад

Blade is currently $33. Guillotine is $220.