I get that question alot, And it's always a tough reply. With good resources and general handiness, Most people can do it themselves. And yes on the python 533 - You may like my video on how to wire an alarm in detail, I use an avital 5303 which is identical to the pyhon model youre interested in.
Thanks for all your videos. I just finished installing a cheap avital 4103 on my cts using a gmdlbp cause it has a pk3+ and I feel much more confident. My biggest problem are the doors. If I didn't use d2d from the module for the doors, it would have taken me a long time to find the door wires. Any good light testers you would suggest. I was losing a lot of time pinching threw the wires looking for positive feedback. Even better if there is one that tells the negative current . Again, thank you for showing us your work. You are def a true professional and I have used you as my reference point many times.
I am surprised to see none of these mechanical wire connections soldered. Wire lacing [IMO] would be a better choice then the stress the drill puts on the wire.
You have to finish all joints with solder or some other insulated crimp connector with gel inside to prevent oxidation. Any wires just twisted together will always eventually not provide a good connection. I've seen wires twisted together about an inch and half and still there was no continuity between the 2 wires unless you shook the connection.
There ARE people who think they know how to install an alarm. I seen myself some disappointing jobs. Luckly I was trained by old school installers and applaud you for your work. I always take pride in my work and cant stand mickey mouse jobs. Starting off with a good brain prep will make everything much easier.
I'm currently prepping an alarm/remote start system to install in my 06 Tacoma, and this video has by far been the biggest help (aside from PDF wiring diagrams, lol). Thank you for taking the time to put this series together!
Awesome, Thanks Lessco Electronics, It's because I'm trying to install the Excalibur AL-2075-3DB-L into a BMW E36, with 1 complete loom BMW and 1 complete loom Toyota, as it's a engine swap and I'm unsure of the method of how to splice and lighten the loom without destroying its functionality. So BMW With Toyota 2JZ engine, plus its a huge mess right now, and no Electrician would take this job on for any reasonable price (don't blame them). Again thanks for the reply and the link to pt2
nice! I wanna do the same on my Acura RSX. Already got the alarm system, immobilizer bypass relay, and a power windows relay (to make the windows go up when I lock the car). Seems to be complicated. I should watch some more videos I guess. Particularly about RSX model. Unless this toyota is similar stuff!
I have a 2003 chevy Silverado base model that I put a aftermarket power windows and locks kits in how would I wire it to make the lock and unlock remote to work with my truck.
Installing an ultrastart 1272. My 2012 Tacoma has starter 1 and starter 2. The remote starter only has 1 starter out-put. From what I have been reading it will start in the cold just not correctly if I only connect 1 of them. What do I do ? If I have to install a relay how do I go about that and do you have a video for that ? Purchased the Ultra-start from your store, and any assistance would be greatly appreciated.
so my al-1830-edpb alarm on my 91 acura integra had it installed almost 4 years ago no issues with it but the last 2 months it has been setting the alarm off by itself no one around the car nothing at all tonight it went off 6 times by itself ever had this issue if so how can it be corrected also can u provide the security system wiring diagram for my 91 acura integra gs thank you Tommy
im going to install a car alarm mark carbine in a toyota yaris 2009 and i was wondering if u could explain if i have to do a dabble pulse in tha door lock. the information about the wire says that needs the dabble pulse but in another says that its a type B but i dont know what that means?.
how accurate are the wiring instructions? I have noticed that there was a mismatch with the accessory compared to another one listed on modified life, for the nissan sentra 2007
After installing a Viper 350 in a 95 Mustang it picked up a dim parking light flash that last about a minute after opening any door. Its set on the positive door trigger. Looks like feedback. Any idea if I need to diode isolate the trigger or something else? Thx
what I think is that I only connect the cables to D2D and it should work? I have a viper that does have the red D2D connector. to which wire do I connect the other cables to? the connectors have the followign color cables: black, ping, green, blue/white, yellow/black & purple/white
Thanks for the video! I am installing a viper 5704 remote start system into a 2012 Honda CRV and was hoping you could help. I already have the xpress dball interface module and the xk-loader2 to do the job, however the wiring diagram from command alarms.com says I need #775 relay for parking lights. I checked the website you gave and it doesn't mention it--do you know if it's necessary? This is my 1st install so if you have any other tips for a Honda CRV I much appreciate it!
hmm.. so would i have to use the bitwriter to use it? because when i try to turn the key to ON and then press the ARM buttom it doesnt beep or anything
Im trying to intstall a remote start on my 2011 corolla but I cannot find a tech for my vehicle. I want to do this the right way and I like your approach. Is there anyway you can send me the tech sheet?
I'm trying to install a pk all xpresskit bypass for remote start but it appears that my Nissan Sentra 2007 is not supported, can you confirm this or is there a way to make it work?
Martin I would like a remote starter and alarm on my 03 RSX Type S I was looking at the compustar 901 system but can't get one and install it... What is omegas flagship model now? Thanks on advance for everything!!!!
Great Work , that looks really good. Looking to do a double bypass Parking break for my stereo system do you know how I might be able to do this easily ?
+Art First you can simply buy this www.ebay.com/itm/Double-Pulse-Bypass-ALL-AVH-PIONEER-PARKING-BRAKE-VIDEO-DIY-Bypass-Override-/361071251028?hash=item5411860e54
i want to know if the place that did my alarm system left the wires in for the remote start because when i got my alarm system done i didnt want the remote start installed at the time. i was a little sketched out about getting it because i heard stories of remote starts in manual transmission cars but now im considering it since were in the winter months now. so how would i know if they left it i have the 5706v viper alarm
does the website still exist? if so could you post it for us? i have a viper 5305V and i am trying to install it in a 98 Ford Explorer Limited. And I need a cheat sheet so i know how to hook it up.
No why I wouldn't solder the wires for the starter bypass relay, minimum a wire nut or crimp connector. If those come loose you can't even start the vehicle with the key.
I have a problem I am installing a alarm/remote start on to my 2008 honda accord I bought the Excalibur al-1950 with a blade al-64 My problems are the the alarm has a neutral safety (-) were dose this go to? And also I install the blade bypass to the correct wires but there is still 2 cables that is asking for to conect witch is the white/black qnd the white wire were do this go to I see the wilhite one is ground but were do I put them thank you and hope you are able to help me ..
I'd advise you to tie the neutral safety wire to your ebrake, so once its engaged itll allow starting to occur, but you can also add in a switch or just ground it and be more responsible with using it
But if I connect it to my ebrake tht meens I have to have my ebrake up when I put my car in park dont it my car is auto or am I wrong and also the two wires on the bypass the white gose to ground and the white/black it says to hook up to a door pin I dint c a door pin in my cheat chart
Good afternoon! Where can i find a specific help video and paperwork by you for system Model 3100LX installation in a 2003 Chevy Suburban? Thank you in advance.
Hi did you know anything about the RF 425 autopage I try to install one on a toyota camry 1995 can you send me the diagram how to installed if posible thanks
I have a 1995 toyota camry and I want to install a remote stater alarm system the remote stater is a RF 425 but I have to wires on my car wich they are positive so w I dont know how to hook up or wich one can you help
Wow u didn't solder that wire just twisted and tape thought u was gonna show us how to.do it right i was like dude know what he doin till u did that just plain lazy solder and shrink wrap everythin u can then if not.solder and tape.it.up good
See why I cant stand DEI, when will people learn??????????????????? Buy an Omega alarm (or any other for that matter), You wont have these stupid problems