No video :(

(PART 2) REAR UPPER CONTROL ARM REPLACEMENT

Подписаться 387

Просмотров 8 тыс.

50% 1

THIS IS PART 2 OF A HOW TO REPLACE THE REAR UPPER CONTROL ARMS ON A 2008 BUICK ENCLAVE.
PARTS CAN BE FOUND AT www.gmpartshouse.com
Part# Adjust Bolt 11610267 (same Right and Left)
Part# Adjust Bolt Cam 11561149 (same Right and Left)
Part# Ft. Lower Control Arm Nut 11516382 (same Right and Left)

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@darnellfaison9724 5 лет назад

So I noticed that my rear upper control arm was broken in half so when I took the tire off the piece that the control arm goes to on the truck was rotted out so there is no where to connect the control arm to the truck,so I'm thinking can I cut the rotted piece out from the truck and have that piece welded on the truck so I can put the control arm on

@vetmech4554 5 лет назад

Darnell Faison It sounds like you have the right idea. I believe that piece is part of the frame so I would check with a certified welder to see if that can be welded on. The problem I see is finding that piece from a salvage in good condition. Good luck and let me know how it comes out. I will take a closer look under the car and let you know if I have a better solution.

@muddinrob 5 лет назад

What was the part # for bolt kit

@vetmech4554 5 лет назад

Robert pagel thanks for watching Rob. I only ordered the bolt and they are the same Part# for the Left and the Right. Here is a picture of the entire kit which includes the bolt, cam washer, and nut.

@vetmech4554 5 лет назад

Robert pagel It wouldn’t let me post the picture, so I left all the Part# in the description of this video. Hope that helps you out and good luck!