No video :(

Part 2 - Tackling a Difficult Hood Paint Protection Film install - Dodge Challenger Hellcat

Подписаться 4,8 тыс.

Просмотров 3,2 тыс.

50% 1

Part 2 - Tackling a Difficult Hood Paint Protection Film install - Dodge Challenger Hellcat
🔥 Join us as we tackle a bulk installation of Paint Protection Film on the hood of the mighty Dodge Challenger Hellcat Widebody! 🚗💨
Witness the final touches as we skillfully complete the Paint Protection Film application on this powerful machine. 🛡️ In this second video, we'll meticulously trim the edges, pre-wrap, wrap, and conclude with precision heat sealing on every edge.
👀 Watch me navigate each step, providing valuable tips and discussing the reasons behind these techniques. 🎬 If you're passionate about automotive protection, this is a must-watch tutorial for achieving a flawless finish on your Dodge Challenger Hellcat hood.
Subscribe now for more insightful tutorials and stay tuned for exciting automotive content! 🚀🔧
If you like this video, please let us know in the comments or with a click "thumbs up". We'd love to make a ton more content like this!
Tools used in the video:
OLFA 5" Straight Edge Stainless Steel Scissors - www.amazon.com...
Wrap Glove Ghost Glove - www.amazon.com...
Wagner Heat Gun - www.amazon.com...
Olfa Knife - www.amazon.com...
Paint Protection Film material - The material (PPF) used in this video is NexGen by PremiumShield, which is now owned by Eastman. The material itself is going away at the end of 2022. So, we'll be switching over to an Eastman brand or be on the hunt for a new brand.
It's taken years to perfect our installs, and we'd like to share this knowledge with everyone.
My name is Brent and I have been an automotive window tinter since 1998 and have been installing paint protection film since 2004. In 1998 I took a 5 day class to learn the basics of window tinting. Then I started tinting cars and learning as I went. In 2004 I bought a roll of paint protection film (clear bra by 3m) and taught myself how to install it. I am now the Owner of ENCORE Window Tinting and Paint Protection Film in Stockton, CA.
Contact:
Email @ Info@encorewindowtinting.com
Check us out:
On the web @ www.EncoreWindowTinting.com
Facebook @ / encorewindowtinting
Instagram @ / encorewindowtinting
#PPF
#PaintProtectionFilm
#CarDetailing
#DodgeChallengerHellcat
#AutomotiveProtection
#Widebody
#DIYAuto
#CarCare
#AutoDetailing
#VinylWrap
#CarMods
#HellcatPerformance
#VehicleProtection
#WrapItRight
#AutomotiveTech
#CarEnthusiast
#ProtectYourRide
#PPFInstallation
#PrecisionWrap
#EncorePPFandTint

Опубликовано:

16 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@EncorePPFtint Год назад

Here is a link to the 1st video from this two-part installation. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QYrTrQuseqg.html

@andrewewen 6 месяцев назад

I've installed PPF for 15 years and stopped thinking about these steps you talk about and just did them by reflex to have a nice clean job, so for all the newbees watching, listen to this guy he really knows what he's talking about and explains it really well.

@EncorePPFtint 6 месяцев назад

It took some time to learn to talk about what I'm doing, while I'm doing it. lol I'm still getting better at it with each passing video. Like you said, I don't even realize what and why I was doing something. It's just mussel memory now. I've really had to start paying attention to what I'm doing and then explain it the best I can. Thank you for this comment! Have you watched anyone else's PPF videos on RU-vid? If so, do you have anything you liked in other videos (or other channels) that I'm not doing?

@andrewewen 6 месяцев назад

@@EncorePPFtint I've watched a bunch of videos and used to watch one guy I found good, I forget what his chanel is now, but he doesn't seem to make content anymore. I find a lot out there is not really realistic in the real world or is missing details. Right now your videos are the most realistic and well explained

@EncorePPFtint 6 месяцев назад

Is it the guy that bulked PPF on a yellowish Acura NSX hood? I think it was an acura. It had a deep recessed vent in it.

@EncorePPFtint 6 месяцев назад

Thank you for the feedback. It means a lot coming from an experienced installer that's watched quite a few videos. 👍🏻😁

@andrewewen 6 месяцев назад

@@EncorePPFtint Yes! that's him

@ronmoerbe5578 5 месяцев назад

Another great video!

@EncorePPFtint 5 месяцев назад

Thank you for watching and commenting!

@GR018 Год назад

Another really good video. Subscribed. Stockton!! Diaz Brothers!

@EncorePPFtint Год назад

Welcome aboard and thank you for the feedback. 😁 I enjoy making the videos and it's a HUGE bonus that anyone finds them useful! I wasn't sure how this would go when I started. 👍🏻

@guiapodiumgp4457 5 месяцев назад

Great content! Thanks

@EncorePPFtint 5 месяцев назад

No problem. Thank you for leaving some feedback. It's much appreciated. 👍🏻

@sergiobarraza1806 Год назад

That ended up so clean! Thanks for the explanation man, new suscriber signed in 😅

@EncorePPFtint Год назад

Thank you, It was a fun hood. Welcome to the channel. I appreciate your feedback. 👍🏻😁

@terrysibley9636 6 месяцев назад

It's worth the time. Ten minutes now will save 30 minutes and a hassle later.

@EncorePPFtint 6 месяцев назад

Agreed. 👌🏻

@whoiswaynereynolds5457 Год назад

Looking great! Good work!

@EncorePPFtint Год назад

Thank you, sir! 😁

@CertifiedTinter Год назад

fantastic work 👏🏼

@EncorePPFtint Год назад

Thank you for the feedback! 😁 👍🏻

@fatwajim Год назад

Great video. I think you should do a video of all the tools that you mainly use - different squeegees, knifes, sprayers, etc. Thanks!

@EncorePPFtint Год назад

Thanks for the idea! I'll start keeping track of the tools I use and then do a video on them and their uses.

@zachb208 Год назад

Man, awesome videos! Your floors look great. What did you do the floors with?

@EncorePPFtint Год назад

Thank you for the feedback. 👍🏻 The floor is a Leggari floor system. I'd say it's been a pretty strong floor. It's a 2 part epoxy. It was quite a bit of work to install but Worth it. Way stronger than the paint on stuff!

@alextrobaugh5887 10 месяцев назад

Prep

@terrysibley9636 6 месяцев назад

Excellent as always, what mil thickness is the material your using

@EncorePPFtint 6 месяцев назад

It's an 8mil material. I used to install some 10 mil on headlight, but that stuff was hard to work with. That was also a long time ago. I'm pretty sure it was made by 3m.

@terrysibley9636 6 месяцев назад

@@EncorePPFtint two questions, what brand are you using, and what is the best ambient air temp for the install bay.

@EncorePPFtint 6 месяцев назад

Most of the ppf in my videos is going to be PremiumShield NextGen. The air temp in the shop varies from 67-80 degrees F, depending on the time of year. I run the heater in the winter and ac in the summer. If I could make it one temp, I would be right around 70 all year.

@BMan100 Год назад

Yeah…company I used messed up the edges.. didn’t get close enough to the extractor vents..an 85%job…

@EncorePPFtint Год назад

I'm guessing that is because they didn't remove the vents to do the installation. Every shop does things a little different. Those are so easy to remove, and I want little to no visible edges in my installs. 👍🏻

@BMan100 Год назад

@@EncorePPFtint yeah, that’s what I was expecting from them…guess they are too used to doing bloody Tesla’s ….lol got a video on how to dyi video to reattach edges that are coming off from shut lines? Lol

@EncorePPFtint Год назад

Is it actually popping up around the vents? That's pretty much game over for that install. Sometimes, it can be a pushed back down, but almost never without leaving some kind of lift line. What color is your challenger? That's a bummer!

@BMan100 Год назад

@@EncorePPFtint oh no not around the vents, the shut lines pretty much. Along the doors, hood, trunk lid, the bits where they fold over around the edges. Those are coming off. Sorry if I want clear, rough at times typing on the app (like I am now)My cars white (Knuckle harr harr dodge) with the caramel interior. With the 6 spd manual and the hellcat brakes

@EncorePPFtint Год назад

Oh OK. I misunderstood what you were saying. If it's the wrapped edges popping up, it's either bad prep work (left grease or wax around the edges) or wrapping the PPF before it was dry enough. Can you have them fix it or redo the work?

6:14

Dealing with parking sensors - Installing PPF Paint Protection Film (Clear Bra) How to PPF

Просмотров 6 тыс.