(Part 4) How To Fix Your Check Engine, VSC, Trac Off Warning Lights With Zero Point Calibration

proclaimliberty2000

Подписаться 281 тыс.

Просмотров 2,8 млн

50% 1

Anyone can do a Zero Point Calibration. It will also be necessary to perform after installing bigger tires, lift kits and after performing a front-end wheel alignment.
Disclaimer:
Under no circumstances will proclaimliberty2000 be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by proclaimliberty2000 or a third party. In no event shall proclaimliberty2000 be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of proclaimliberty2000, it cannot guarantee against improper use or unauthorized modifications of this information. Proclaimliberty2000 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Proclaimliberty2000 recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of proclaimliberty2000, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not proclaimliberty2000.

Опубликовано:

22 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 845

@janebray9392 2 года назад

Thank you!!!! We are travelling, and are 3000 miles from home, and You just fixed our FJ!!! We were almost paniced but took it to God, and then youtube,lol...and as soon as I saw the cross on your page I clicked on it!!!!! 🙋‍♀️🇨🇦🚙❤👍🏼‼️

@michaelringwood1163 5 месяцев назад

I have 2010 Corolla with the VSC and slip control lights on, no check engine or ABS lights. A scan from Auto Zone noted a zero point code. This process worked for me. I'll still have to get an alignment as my front tires have uneven wear but it sure helps a ton I don't have to pay for a computer diagnostic. Thank you, sir.

@jdogg703 2 года назад

I cannot believe this worked!!! My car has had those lights on for over a year. For anyone thinking about clicking on another video, just follow this mans advice!!

@proclaimliberty2000 2 года назад

👍😊

@jitendersonu 10 месяцев назад

Hey man those lights went away permanently? Or they came back?

@skylertegland9434 6 лет назад

I went through these videos after the local shop handed us an estimate of $1412.59 to solve our indicator light issue. They hooked up their OBD and interpreted the results to mean that the catalytic converter was probably disintegrating, causing a temperature differential that was triggering the system warning lights. They wanted to replace the two sensors (oxygen and temp) and to replace the exhaust manifold as well (which integrates the cat. converter). I had my doubts, however, as the car had full power and normal engine temperature. I went through Paul's videos in order and solved the problem in about an hour. Thanks, Paul! You gotta love the age of information! After the reset, the car idle was rough for the first 25 miles as the computer idle compensation had to recalibrate. Now everything is perfect.

@proclaimliberty2000 6 лет назад

That is fantastic! I'm so happy for you. You went the extra mile and it paid off BIG TIME! Thanks for letting me know. I really like to try and help people. Now you can go buy somemore Christmas presents. LOL! I can't even begin to imagine the amount of money that people pay out unnecessarily on auto repairs.

@jacobanderson4644 4 месяца назад

I can't believe after almost 2 years, NONE of the mechanics even considered doing this. I've had a non-functional rear driver side brake this entire time, along with no traction control/vsc and the car would keep pushing when I came to a stop. I had to put the car in N at stoplights so it wouldn't keep pushing. Not only that, I wasn't getting any regenerating so the best my mileage would be is 20-23mpg over 100 miles or so. Now, I'm getting mid 20's - low 30's for mpg on average, I have traction control again, it even just rides smoother, more even. The local Toyota dealership told me that I would have to pay about $350 just to put it up on the lift and read the engine codes. You just saved me hundreds, potentially thousands. I know this video is 6 years old but thank you thank you, thank you so much!

@AaronVo-r2i Год назад

Thanks for your informative videos Paul. I watched all 4 parts of your videos and was able to clear them after removing the battery cables for at least 5 minutes, reconnecting them and restarting the engine and it worked without doing the other steps. I have 2009 Toyota Sienna. God bless you for taking your time to provide clear instructions video to help out so many people like me.

@albiniogonzalezgonzalez6374 9 месяцев назад

How do I find the first parts of this video?

@D.A.Hanks14 4 года назад

Most of this video was above my level of expertise, but the last bit at the end about the auto window switch fixed an issue I've had since the dealer replaced my clock spring. The airbag light was flashing and the window was effed up. Thanks for being thorough in this, to cover ALL potential issues.

@proclaimliberty2000 4 года назад

dahanks1 👍😊

@phillipsmith9050 5 лет назад

Paul your advice in this video was spot on!!! Thanks so much you saved me hundreds of dollars I’m sure. Scenario: 07 tundra lifted with big mud tires. Tires were rotated at dealership and caused vsc, brake, and slippery surface light to come on. They should have recalibrated my sensors but didn’t. Took it back to have them check if it was anything they did or didn’t do and they want to charge another $103 just to look under the truck (Classic Toyota North Wilkesboro, NC). I tried your advice and fixed the problem instantly!!!! Thanks a million!!!!!

@rpvphlee 3 года назад

Lifted my truck and added 35s same scenerio with all the lights flashing. Really hope this works!!! Dealership wants $750 to clear it.

@rioarg178 3 года назад

4 years later and this is still helping people like me out🤘🏻 thanks a bunch. You got a new follower

@proclaimliberty2000 3 года назад

👍😊

@MNDrizzle81 Год назад

Finally Someone who put a video out that was straight forward, and useful! Thank you so much..

@BradRGarrison 4 года назад

THANK YOU SO MUCH!!! The dealership in Grand Blanc Michigan wanted to charge several hundred dollars to replace parts that were already replaced before they would reset the lights. your method worked great and they have not come on again. Thank you so much.

@Wildo83 6 лет назад

Drove 350 miles to rescue my stranded wife with this! I hope God blesses you! In the mean time, can I send money somewhere? Saved our butts!

@harrywinstonfilms 3 года назад

Hey Paul thanks man..a few hours ago after a mechanic replaced my gas tank in a lexus lx470, the VSC came on and would not go way ,he did not know to fix it ..thanks to you and some other youtubers i was able to follow this and it worked for me after a few try...huge thanks

@michaelreyes6761 3 года назад

Best mechanic in RU-vid. No better way of explaining it. Thank you so much.

@proclaimliberty2000 3 года назад

👍😊

@emanmoral 4 года назад

It's so good to see someone dedicated to the most reliable car in the world. Still sometimes you need to fix things. Sydney, Australia.

@jamesdesjean3738 4 года назад

I was skeptical but this worked EXACTLY as Paul instructed and fixed the problem. Thank you Paul for your easy to follow video.

@mogulhue7480 2 года назад

@Mr.8.7.8USCH 3 года назад

About time a YT Video where someone knows how to speak, & actually wants to help! Thanx Man, most ppl seem to just add BS! U Hava great 2021 Sir!!!

@levishearer3205 6 месяцев назад

Worked like a champ. VSC light came on when I did the brakes. This was the fix as I knew nothing was wrong with the system or vechicle.

@LuckyStrike-ov9cd Год назад

Thank you very very much for posting this video had the lights on for days went to my mechanic and was told it would take hours for him to diagnose the problem and it would be over $200 I choose not to do it came home and went online and there was your video even though I wasn't sure if I was doing it right it freaking worked like a charm not sure if it will come back but I'm very thankful to you

@johnredfernjr8363 2 года назад

Thanks Paul. It took me to video 4 before the lights cleared. It happened exactly as your video showed. I have a chitons repair manual for my 2006 highlander and no references to the wires in the diagnostic port. I decided to just do what you did since I think your vehicle is the same as mine. Lucky me it worked. Thanks again.

@muttliee 4 года назад

Hi Paul - thank you for the post on fixing the check engine light. I did this and it worked. I was in panic mode every time I drove my car as I had it checked and there were no problems. But as the light stayed on I thought a catastrophe was about to happen. No stress now thanks to you. Michele

@proclaimliberty2000 4 года назад

Its Snoopy 👍😊 The only time you really need to worry about a check engine light is when it starts flashing. Driving with a flashing check engine light is when you can really do some damage to the engine.

@muttliee 4 года назад

@@proclaimliberty2000 Thank you for your reply. Yeah the light was flashing and I took it to a mechanic who replaced an oxygen sensor but the light stayed on. He said not to worry about it. After I did your trick it's off so thank you for that. I'm a female and mechanics always either rip me off or talk like I'm an idiot. Thank you again. I'm flowing a lot of your posts. Michele.

@proclaimliberty2000 4 года назад

Its Snoopy 👍😊

@mewwesty 4 года назад

An airbag recall/replacement triggered my check engine, VSC, Trac Off issue and this procedure resolved it. And, the most important part was that, I didn't have to go back to the Toyota dealer! Thank you.

@brucea4185 3 года назад

My 2004 Sienna started with Check Engine, VSC, Trac Off combined ON without trouble code for awhile; then, one day P0420 code was added, of course it failed emission test. After struggling, I replaced the Bank 1 catalytic converter because oscillating rear O2 sensor reading. New catalytic converter fixed the problem right away; it did not only take P0420 code away, it took Check Engine, VSC, and Trac Off away as well. Now the van runs fine with clean dashboard. I thought it was weird that fixing emission problem took away traction related codes as well but I am not complaining.

@rodneymahabir1615 7 лет назад

Worked great for me. On my 2010 Corolla the cg & ts were the fourth terminals counting from the RIGHT. Fourth from the top and the bottom terminals. Thanks a lot!

@GPSniper1 2 года назад

thanks you safe me time looking at diagram. mine is 2010 corolla too

@nugentji 7 лет назад

Paul, I greatly appreciate your videos. I've downloaded all four of the VSC trac off pieces you made. Wife's 2005 4R had lights come on yesterday. Looking forward to getting out there and trying the tips. Have a great day, and God Bless you too.

@proclaimliberty2000 7 лет назад

Hopefully you'll get the problem fixed. There's nothing like being able to fix something yourself and being able to save your hard earned money. Let me know how it goes.

@azazkhan1218 Год назад

I took out the lights with a paper clip but I want to ask if it will come back car Ls 460 2007

@m.n.3490 10 месяцев назад

Where are the other 3 videos? I cannot find them.

@Ratkill 2 года назад

Thank you for being loud. I cant hear most car tutorials when im out there with my little phone.

@erikhanson8830 2 года назад

It took to part 4 to figure it out. The paper clip in the obd port worked like a charm. 2006 Highlander base model. God bless, Paul.

@proclaimliberty2000 2 года назад

👍😊

@ELJAY-k7i 6 месяцев назад

@@proclaimliberty2000 oh I wish you would post a video on how to get rid of the permanent TPMS dashboard light on my 2010 GS 350. It flashes when you turn the car on and once you put it in drive the light permanently stays on. Also, the red seatbelt light stays on the dash even though I engage the passenger seatbelt. A local mechanic told me to do that and obviously didn’t work. And to the right of my stock radio? airbag light stays on and so does the passenger seatbelt light stays on. Both of those lights are Amber in color. I don’t like lights other than Christmas lights on my tree. Someone help because you know mechanics are going to rip off charging hourly rates to diagnose, especially if you are female and that is still unfortunate but it does occur

@winza999 6 лет назад

Oh my God...your video was a life saver. I only had to use your instructions from the first video and tighten the cap, indeed it was not all way tight before which explained the problem. Thanks so much for sharing this information. It saved me a bunch of money which Lexus would have happily ripped off to fix my IS250. Keep up the good work mate. Cheers. Sam

@banneddotcom 2 года назад

Tighten what cap??

@kimberlybronson Год назад

The gas cap. If it's not tight your engine light may come on

@kristyandelginsmith7175 5 месяцев назад

Thank you! This worked on my 2009 RAV4. Putting this comment here in case it helps someone bc I had to search for it: The two ports in the OBD2 you need are #4 (top row, four from the left) and #13 (bottom row, five from the left).

@showreadycarsllc4498 6 лет назад

Super !!! A+!!! HAD VSC AND TCS light on a 2003 TOYOTA CAMRY XLE V6, MADE SURE I CONNECTED THRU PIN 4 & 14, DID THE SAME PROCEDURE AND WORKED PERFECT!

@jitendersonu 10 месяцев назад

Did they ever come back after performing this ?

@juancolon887 6 лет назад

Yes!!!! It worked😁😁, make sure you follow the directions carefully as this procedure took me a couple times to get right. I came back to this procedure after i tried all 6 of the procedures

@valsimonovich1471 2 года назад

Sir, thank you very very much. Your video saved me pulling my hair out. I did what you said to do and will. Couldn't do it without you And I was using a fancy snap on scanner. God bless you sir!

@proclaimliberty2000 2 года назад

👍😊

@SowingSeedsWithChristy Месяц назад

That seems very straight forward. Thank you for how clearly you presented this info!🎉

@tabbysullivan4337 3 года назад

Thank you so much. I held down the trac button while starting the vehicle, and like magic it went out. You are so awesome😊😊

@arthurdent5903 5 лет назад

I have a 2003 Toyota 4 Runner LMT and this procedure worked on clearing the VSC/Track light as well as the CK Engine light, it's been 2 weeks and my dash is clear. My SUV was running fine until I added 33" Nito-Trail tires and Bilstein Shocks, so far so good, hopefully I won't have to take it to the shop. Thanks for the advice and money saved, Toyota would have charged around $100.00 or more just to clear the codes.

@proclaimliberty2000 5 лет назад

Gary Osborne 👍😊

@s33flous 6 лет назад

This is the only method that worked for me after watching several other videos. Thanks!

@kuskiy8056 Год назад

Work like a charm. My 05 Toyota Highlander had the vsc and trac off light on after my battery died . This trick work perfect for me. Thanks.

@Bshipbuilder 6 лет назад

It worked! Thanks Paul! 2011 Toyota Sienna SE 3.5L Only difference was that my OBD connection port was upside down from the one shown in the video. But it was shaped the same so the orientation was easy to discern.

@petecomeque1109 5 лет назад

Ben Builder i

@barbarawilliams2477 3 года назад

Paul, do you have a LOVE IT button..lol i'm a 68 year old lady, and this was the best video i have found on youtube for fixing my 4runner..Thanks so much..

@proclaimliberty2000 3 года назад

👍😊

@hassanallawati4418 5 лет назад

Does anyone else think that Paul looks like Red Forman from that 70’ show? Like if agree

@imyanigmw 5 лет назад

Eric, don't be a dumb ass 😂

@stinkfist3075 5 лет назад

I was thinking he looked a lot like George Karl!

@m.anthonyc.8761 5 лет назад

Like his friendly brother lol

@hankbridges5055 4 года назад

Hassan Allawati More like Clarence Bottinger on Robocop!

@estlhm805 4 года назад

😆😆😆

@MrGmchinchilla 6 лет назад

Thanks a lot. It worked and I´ve repaired my Electronic Power Steering with your help, my RAV4 2006 had the problem that the EPS was working not correctly, very hard and the car was very difficult keep straight on the highways. The Toyota Dealer asked me to change all system, costing arround 2000€, imagine... thank you Paul

@proclaimliberty2000 6 лет назад

Gerardo Moreno Chinchilla You’re welcome.

@elsupremo9188 2 года назад

It worked for me without disconnecting the battery. Thank you sir.

@proclaimliberty2000 2 года назад

👍😊

@kj232009 2 года назад

I thought the same. But my car didn't feel quite right. So after 4 days I decided to disconnect the negative and positive battery terminal first for 5 mins, then follow the recalibration steps and it was noticeably smoother. 🤷‍♂️

@whitsusiecox 6 лет назад

Appreciate your good advice on this problem.....got through parts 1-3 without clearing the problem. Before my husband got to step 4, a friend told him to disconnect the positive battery connection, leave off for @ 5 minutes, reconnect it and start the car. Friend said that acts much like rebooting a computer. VIOLA! The lights cleared.

@landocustodio6689 2 года назад

I've watch and did parts 1-5 and the engine and Trac warning light stayed on but then Ive read your comment and tried it again boom lights disappeared. Thanks to you and of course to Paul for making videos.liked and subscribed here 😀

@kenbales7062 Год назад

Good Call! Local key shop was programming a new key and I was driving home with Engine check light, VSD, traction control, and Red BRAKE light. Using the OBD scanner revealed 3 codes: C1203, C1336, and U0100. All 3 disapeared once I used paper clips to reset the "Zero point calibration".

@dddrockies 2 месяца назад

This did not work at first until I found out you have to wait 120 seconds of the lights flashing rapidly. After 120 seconds I pulled the paper clips out and restarted the car. I was so excited to resolve this issue.

@leemav5136 5 лет назад

Thank you！ It's very helpful. I live in Chicago and find my Trac off on a snowy day. With your video I've fixed my problem within 15 minutes!

@proclaimliberty2000 5 лет назад

lee mavis 👍

@miguelpayette2966 8 месяцев назад

Just putting it out there but i tried several fixes with no love. I thought id change the spark plugs as i had no idea when they had been done and there was almost no electrode left! I gapped them and replaced them and no lights so far!

@proclaimliberty2000 8 месяцев назад

Hey that’s great! 👍😃

@HabibRKO 2 года назад

Thank you bald Scotty Kilmer!

@algannamy 5 лет назад

الله يجزاك خير يا عبد الحق...على نصحك وتعليمك وفوائدك.... اللهم صل وسلم وبارك على نبينا محمد وآله وصحبه اجمعين

@emanmoral 4 года назад

You are such a blessing to heaps of people.

@bean6180 7 лет назад

Worked on my ‘05 Highlander this morning. Thanks!

@robertbritton9865 2 года назад

Where did you enter the paper clips?

@Boogiehill 3 года назад

You are a genius and angel on this awesome and magnificent Sunday. Thanks

@dabig_guy2204 Год назад

Dude, we already have ONE Scotty Kilmer. Do we really need another one?

@josmararm 2 года назад

Funciono perfecto en una toyota hilux 2012 argentina!!! Muchas gracias!!!

@trival21 2 года назад

Thanks so much. Today 12/23/21 I tried this on my 2005 Toyota 4 runner and it worked!! It cleared the VSC, ABS, and Check engine lights. Thanks so much!

@TheBehm08 5 лет назад

I would pay money to listen to this guy debate Scotty Kilmer lol

@waldipup 3 года назад

As if what Jordan , they're anywhere near being in the same class? Kilmer would just berate this guy for suggesting to amateurs - or anyone - to play wire games with their OBD11 port .

@pH7screwtube 2 года назад

@@waldipup Playing with the OBD can toast your computer. But in this case it has helped me clear that silly vtrac abs garbage. Scotty is a class act. Dont use this opportunity to sling mud.

@jackokpoyo1046 2 года назад

Thank you very much for this important video. I didn't wanna to take it to the dealer because they will charge so much. Thanks again. Have a blessing day as always. Jack

@paulburkhead831 2 года назад

Dude it worked exactly the way you said... I touched the paper clips together 6 times the lights flashed out of sink,, turned the car off held the clips together and turned it on,, they flashed in sync .. recalibrated! Check engine light off and we are good to go :) thank you!!!!!!!!!

@proclaimliberty2000 2 года назад

👍😊

@ryansmith2213 5 лет назад

THANK YOU! Disconnecting the battery was the key step! No other videos mentioned that...and the lights kept coming back on! THANK YOU THANK YOU!!!

@proclaimliberty2000 5 лет назад

Ryan Smith 👍😊

@justinvaughn7778 4 года назад

Yes this guy looks just like red foreman but let me tell you that I tried many many processes to get my dash lights out nothing has worked but this video right here fixed a 05 Lexus RX330 and a 06 Lexus GS 300. Worked like a charm. I have had my car scanned and rest and all kinds of things nothing but this worked!!

@proclaimliberty2000 4 года назад

Justin Vaughn 👍😊

@minwu754 3 года назад

Thanks a lot ! We just disconnected battery foe 5 minutes and connected battery again, the lights Disappeared. That’s amazing ! Thanks again for giving us the idea .

@proclaimliberty2000 3 года назад

👍😊

@JBreeze4598 2 года назад

Good day, wanted to ask if you know what TS pin is for? I have a 2015 Nissan Versa with the "Slip" light/VDC on solid. The pin out chart shows CGND-Chassis Ground, but I do not show a TS. Thanks Josh

@berryc4155 2 года назад

Worked perfectly on my 2007 Tundra. THANKS!!!!

@proclaimliberty2000 2 года назад

👍😊

@BruceSchmidt-mi2wt 9 месяцев назад

Worked on my sons 2003 Toyota Highlander BUT I used ports 4 and 14 same 4th one on bottom but 14th on top. Thanks.

@saviorJay51 4 года назад

Thanks so much for this! I didn't use two paper clips but one small metal wire and made a U shape out of it. Love your content...much peace, love and God bless bro!

@proclaimliberty2000 4 года назад

jayjay D 👍😊

@davevanschuyver4536 Год назад

Grandson and I just performed this tip. On 2013 taco, Awesome to the point instructions.!!!Thank you so much..:)

@kelliemartin294 7 лет назад

Thanks so much! Solved our problem with the VSC light, the alignment shop we went to with our 2015 4Runner didn't know how to clear the light. Much appreciated, that was very easy to follow.

@du-gu2mm 6 лет назад

MartinFamily Of6 I felt a sudden vibration on my '16 runner then suddenly check engine and trac off light came on. any idea? tnx

@amirfarooq4237 6 лет назад

Thanks friend your videos very good I want you are help me thanyou

@scorpiosuave 4 года назад

Greetings, I'm testing my 02 Sequoia with a multimeter after a p1126 engine code. When I test the throttle control it clicks and spins but there is no signal from the electrical connector on prong 3 (blue wire). How can I figure out if it's my ECM or the harness cable?

@MrCooloo1 6 лет назад

Just wonderfull!! This tip worked perfectly for my Sienna 06 VSC's problem. Thank you!

@landendominick4906 3 года назад

Instablaster.

@donnolton4479 Год назад

Where the paper clips go on your obd port which pins

@MrCooloo1 Год назад

Bud I just followed indications he gives in this video, I just put the pape clips right in same holes he did it, and worked fine. What I found is those minivan normally have same functions in same position, never change. I hope you can resolve your issue

@esonlaing88 4 года назад

This video clip really Blesses me personally and i hope to Bless everyone..Continue with this Good effort,many Blessings! Tqvm!God Bless You Sir!

@bonnieinnocentini369 5 лет назад

You are awesome! Thank you for such a clear and concise video. You made my day and God bless you. :)

@proclaimliberty2000 5 лет назад

Bonnie Innocentini 👍😊

@danielmorvec1889 5 лет назад

This worked for me. 2005 Sienna. 1 thru 3 did nothing. Step 4 was the cure. Thanks.

@proclaimliberty2000 5 лет назад

Daniel Morvec 👍

@adeboyefestusoluyimka7473 3 года назад

My car is now working perfectly. Your information is so helpful and perfect. Thanks

@proclaimliberty2000 3 года назад

👍😊

@BlueFenixMD Год назад

THANK YOU!!! I've got a 2011 Camry, got the VSC light on after wheel barring & alignment. This fixed the issue.

@usavideogames7599 2 года назад

Should we make sure that the wheels are straight BEFORE we touch the paperclips together ? You said after but seems like before is proper ? Thanks. Anybody knowledgeable please reply soon.

@norcoauctions 5 лет назад

get some glasses and you and Scotty Kilmer would be mates

@aminmombini6882 4 года назад

Yeah,i was about to say this

@malikahtappin8323 4 года назад

😂😂😂😂😂

@maestrorochi6500 4 года назад

Hahaha I'm not the only one note that... same way to speak

@louietramposch4559 3 года назад

Kilmer is click batey where this guy seems legit... Scott's title would probably say. Gain 50hp by doing this & it's free... however I have not done this vss abs reset.

@marlonhernandez8411 Год назад

😁😁😁

@davidflynn6358 4 года назад

Thanks but my check engine light has been on for 8yrs!! I think I'll be lonely if it were to disappear.

@afeemmanuel 4 года назад

Hahahaha

@shadiikosgei2334 Год назад

😂😂

@ssu123 11 месяцев назад

Lend me some strength 😢

@d.phothirath5084 10 месяцев назад

Hahaha😂Hahaha

@nnamdiokoye3357 6 месяцев назад

Lolsss

@huysworld701 2 года назад

Thank you so much RED from that 70s show... you are life saver.

@leesimino8440 Год назад

Paul you kick ass dealer wanted to charge me $160 just a diagnose it took 10 minutes fix the problem right before a snowstorm thank you so much my man you do look a little like Red Foreman sorry

@darayleknause3126 7 лет назад

Worked on a 2004 Toyota 4Runner V8. Best video I could find on this topic. Thanks!

@kingjamez4036 Год назад

I have a 2011 Toyota 4Runner v6. can you point out the correct way for me to find the cs/ts pin?

@kadanbolanos3603 4 года назад

Best video ive seen on this issue thank you very much. Now the only thing i need is to find why my speakers stopped working.

@deem4735 5 месяцев назад

I discovered prior to seeing this video that when I replaced my battery the lights went away. So perhaps just removing the connections and reconnecting the battery will suffice?

@PhilipHuang Год назад

Thanks a lot! Best step by step helps to complete the job! Greatly appreciated, May God bless your clips, Do More!!

@israelramos4804 3 года назад

I have a 2004 Toyota Sienna XLE Limited AWD and it worked great. OBD Pins were 4 & 12 Followed instructions from the video and beeping from the slip indicator light Did not show up anymore.. God Bless you.

@brianoconnor6514 7 лет назад

Thanks Paul.... this did the trick after replacing a faulty ABS sensor

@liemnguyen5264 4 месяца назад

Thanks for the great information but how can I find out which port is TS and which is CG? I have a Lexus 2007 RX 350.

@susiesun9862 Год назад

Thanks Paul you made a big difference to my sisters racing heart 😆

@jwarthen1977 Месяц назад

I have a 2007 Toyota Highlander. Both the check engine light and VSC light are on. They came on in the afternoon. The TRAC off light isn't on. I did get gas in the morning and I do remember hearing the gas cap click when I put it back on. I'll try some of these to see if both lights turn off.

@krzysztofprusinowski5696 2 года назад

Paul thank you, it really works - the problem occurred in the Lexus 460 after replacing the battery

@rinzlur7212 11 месяцев назад

Just did this right now for my 08 lexus is250. Actually worked holy crap.

@rinzlur7212 11 месяцев назад

Just want to add, I first changed the gas cap, wasn’t that. It all started out with a dead battery in the morning, so I thought changing out the battery would help. I went and bought a new battery but the vsc light remained until I did the trick from the video, thank you!

@jimmyaparicio8942 2 месяца назад

Hello sir, I have this issue and wanted to ask before I do this procedure. Had suspension work done along with alinement on a Toyota Sienna. Not happy with the alignment because the steering wheel is off line (do by a your kid). Should I have the alignment done again (of course by a different alignment shop) to make sure the steering wheel is straight? I could use your thought on this. Thanks.

@leecope2701 4 года назад

Thank you, fantastic. I took my 2014 Ram to the dealer, they charged me $489 to replace a cable, that was 14 months ago. The airbag light came on and stayed on again, this time I checked the cable plugs. That was the problem!! Thanks again!!

@proclaimliberty2000 4 года назад

Lee Cope 👍😊

@jakobmasat 6 лет назад

Thank you very much, Paul. Worked great on my Landcruiser 90, 3.0 D-4D, 50th edition, 2001! Lights are cleared now!

@kayryan3147 3 года назад

Thumbs up buddy 👍 appreciate the tips w/o all the fluff. God Bless.

@jimmiejohns5857 5 лет назад

Wow.... That had to be the most well explained video I've ever seen posted on youtube. I didn't even need to watch this video it just happened to be the next to be played and i couldn't stop watching so im now subscribed and a BIG 👍 UP to you my freind for such an informative video. If i ever need advice on something i know who to turn to....AAAA+++++💥

@vegitoblue7908 4 года назад

Did it really fix the issue in your sienna?

@eddwardcomeau8882 3 года назад

Follow Paul’s tutelage and guidance and you go amiss. Worked for me. I’m truly thankful sir!

@proclaimliberty2000 3 года назад

👍😊

@wnhulsey3 2 года назад

Paul is AWESOME!!! Thanks so much!

@maleasamauro2818 2 года назад

Thanks Paul! You saved me over $1000!

@pdmaheshsharma 6 лет назад

THANK YOU BROTHER FOR YOUR TIME TO EXPLANE

@proclaimliberty2000 6 лет назад

Pd Mahesh Sharma You’re very welcome!

@bogieb1972 5 лет назад

I have a 2001 Toyota Sequoia and am trying to find which pins are the CG and TS. I can not find a diagram online that tells me. Anyone able to help?

@donmorrison4865 5 лет назад

Paul, bless you brother! My wife was about to shoot me..lol. I tried to bleed the brakes and created many issues, thought I was going to have to have it towed. Between your video and learning I needed to pull the ABS relays to bleed the brakes I got it taken care of. Thank You!

@proclaimliberty2000 5 лет назад

Don Morrison 👍