Part 6: Cover Design - Penguin Clothbound Classic Rebind Tutorial

Подписаться 29 тыс.

Просмотров 15 тыс.

50% 1

Part Six of my series on how to rebind your books into the Penguin Clothbound Classic aesthetic. This is a pretty long video, but will walk you through the steps of how I design all my covers in the ‪@Cricut‬ design space app. I'm going to make an additional "HOW TO" cricut video for once you have your design some tips for cutting/weeding/ironing on HTV since I've received a lot of questions about that.
QUICK CRICUT NOTE:
Any machine the size of the Joy Xtra or larger works for this type of book cover. I personally have the Maker, I bought it at Costco a few years back. You definitely don't need the fanciest cricut machine they sell, just something that can cut at least the width of your outline (the Joy machine only cuts 4.5 inches wide)
I will be making additional videos after this, answering questions you still have, going over other methods etc. Also redoing my initial videos in horizontal format since I initially made them for TikTok. Leave any questions/suggestions for additional videos in the comments!
Highly suggest watching the other parts of this series first, where I go over all the supplies needed, how to prep your text block, make the case, and attach the text block to your case.
If you want to see some of the books I've done follow me over on TT and Insta:
TikTok: / thatsmybookshelf
Instagram: / thatsmybookshelf
My Amazon storefront links all supplies needed:
www.amazon.com/shop/thatsmybo...
Any other helpful links are in my linktree
linktr.ee/thatsmybookshelf

Опубликовано:

2 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@sammieg1498 4 месяца назад

Idk why but it is so satisfying watching someone problem solve like this

@bam251 5 месяцев назад

Not even two minutes in, and I’ve already learned so much… Thank you for your work!!

@agoodburn4 3 месяца назад

I’m new to book binding and new to cricut. This is exactly what I was needing help with. Thank you so much!

@tgarza521 4 месяца назад

Just so you know, if you’re able to rearrange your images even if they’re on two different cutting sheets. If you press those three dots (•••) you can actually transfer the image from the second sheet to the first. That way you don’t have to load it twice. I do it all the time and it’s definitely a time saver!

@rxgoddess2005 4 месяца назад

BEST cricut tutorial I’ve ever seen. You deserve all the stars!!!!!!!! I’ve had this machine for over 6 years, could not figure the thing out and chalked it up to me not being tech savvy. Maybe your mind and my mind just think the same way because I totally understand everything you went through. I’ve watched other tutorials before and NEVER quite understood. I’m actually going to pull this machine out tonight and try to create something. I came for the rebinding, got that and left with being able to use a cricut. THANK YOU!!!!!

@ThatsMyBookshelf 3 месяца назад

Oh you’re so welcome!!! This is great to hear! Yay finally using the machine!

@strongpowerthankyou9298 2 месяца назад

This was great! I've been looking for a tutorial on cutting out shapes from outside the frame for TWO days (I'm super new to Design Space), and this explained it perfectly - thank you so much!

@user-nl4ob4lp2n 5 месяцев назад

Love your videos! FYI when it puts it on 2 mats but you know it fits on one you can click on the 3 dots of the design on the second mat and move it to the first mat 😊 That saves the unload and reload of the same sheet of HTV

@ThatsMyBookshelf 5 месяцев назад

THANK YOU!! I learn something new every day with cricut!

@LollieEliza 4 месяца назад

This has been the most helpful tutorial I’ve seen so far. Thank you!

@eleanor8537 4 месяца назад

This is such a helpful and easy to follow tutorial. Thank you so much!!

@reginakrystyn Месяц назад

You made this look so attainable! Thank you!!! 🙏🏾📚

@michaelawightman790 5 месяцев назад

Thank you so much for this ! Attempting my first bind this weekend :)

@caitlinmay8384 5 месяцев назад

omg i’ve been waiting for this one!!! love your work ❤

@Octorawk 4 месяца назад

Thanks so much for these! I have a book with a cover I absolutely hate and I've been wanting to change for ages but wasn't sure what I wanted it to look like. The penguin style cover is a great idea and I already have a design in mind! I'm still in the process of gathering materials. (Not to mention it'll be great for my poor neglected cricut to see some use. Can't wait to see the next part on actually getting the design on the cover, that's what I'm most nervous about. ^_^;;

@PerfectPorcelainDisaster 5 месяцев назад

I would really love if you could do a full length video showing the process. I’m very curious about how the end papers end up looking with the next page after them, if you put something behind them so it’s not a semi see through page. Love your videos!

@briannenoyes3108 5 месяцев назад

Thank you so much!!!

@CaptinPoser 5 месяцев назад

It’s Christmas wahoooo

@gamingattic 3 месяца назад

Thank you so much for this tutorial! It helps a lot when you’re completely new to Cricut I see that you use HTV. Do you use the Cricut press? What settingS do you use for your HTV? Is there any tips you have for ironing it on?

@CaptinPoser 5 месяцев назад

Just finished the video - amazing! I couldn’t do that without this guidance. Quick q - how do you establish the size of the boarder, and what margin to use so the design doesn’t go right up to the edges of the book.

@ThatsMyBookshelf 5 месяцев назад

I don’t have a set amount that I use, each time I hold the ruler up to the case and sort of eyeball it (super helpful I know), to see what I think will look good but if I recall correctly and I’ll check back later if I’m wrong but the PCCs have I think 7mm gap around them?

@christinemiller5638 3 месяца назад

Hi, this was great and exactly what i'm looking for. Will you still be making the "how too" for ironing?

@tessstarman5568 2 месяца назад

Yes- I would like this too! A printing, weeding, and ironing tutorial!

@floralzero 4 месяца назад

Omg i love your voice so much, and so in love with your shorts. I think your system is wonderful. Im not sure if i missed it, but do you have any tips for warping covers? :(

@ThatsMyBookshelf 4 месяца назад

That could definitely be a result of grain direction of your board vs bookcloth. Also if you aren’t doing a hard press of your cover once you’ve glued the fabric down. I normally press it for at least a few hours before ironing on the htv

@floralzero 4 месяца назад

@@ThatsMyBookshelfthanks for the advice! and best of luck with your youtube channel and content

@nannagwen 4 месяца назад

Hi! This was super helpful, are you to be doing a video for the weeding and ironing part of the cover as well? Im really nervous out that because i only have a cricut joy so i think i have to do half a cover at a time, its too small to do one whole cover. Or any tips on that would be amazing! Loved the videos!

@ThatsMyBookshelf 4 месяца назад

Yes I’m filming that this week 😊

@nannagwen 4 месяца назад

@ThatsMyBookshelf Oh thats amazing! Really looking forward to it

@noiseworks 21 день назад

@@ThatsMyBookshelf looking forward to it

@sofiekern5889 4 месяца назад

When transferring the design to the book cover, can I use a regular clothes iron or do I need that special heat press?

@ThatsMyBookshelf 4 месяца назад

So I ended up biting the bullet and getting the $50 mini heat press. A regular iron doesn’t give a good enough heat distribution and I melted and messed up about 5 covers with a normal iron before just buying the mini cricut iron.

@LetYourInnerBeautySh 4 месяца назад

Hey! Where do you get the card stock to match the book theme? I’ve looked at Michael’s, Hobby Lobby, Amazon, and Esty but nothing is catching my eye. So like, for the HP books you did, did you just get a blank card stock and print your own design? Or is there a magical secret website I’m missing out on lol?

@ThatsMyBookshelf 4 месяца назад

That’s where I get everything actually. I don’t make my own just add embellishments to ones that already have patterns. I go through all the materials I use and where I source them in my first video of this series if you’re interested!

@kreativeReise 4 месяца назад

Wouldn't it also be possible to put the title and the author in a box and the pattern one layer behind it?

@EstelaMunozLobo 3 месяца назад

Could you be willing to share the project with us in Cricut design space? I will love to start wit yours and then rearrange it for my own books, in my head feels so much easy that way, (not good with tech :\)

@user-hb5sb3jk6d 5 месяцев назад

Hi. I don´t know why when I attach the items it changes automatically the operation to print then cut and It doesn´t allow me to change it. ¿Can you tell me why is happening that? All images are on basic cut operation before I try to attach them. Thank you very much for your tutorials.

@ThatsMyBookshelf 5 месяцев назад

Hmm I’m hoping someone else who is more cricut savvy will jump in to help you as I think any time that’s happened to me it’s because I accidentally picked a print than cut image and just had to find a different one. Sorry I can’t help more!

@user-hb5sb3jk6d 5 месяцев назад

@@ThatsMyBookshelf thank you . I'm going to try and do it with a different image. Let's see if it works. Thank you very much