Part I: Testing Out the Neo 2 Dual 310 by FR Skates 🆕

Подписаться 211

Просмотров 3,1 тыс.

50% 1

Testing out the new dual density shell mold by FR Skates!
Overall I like the skates; however I still prefer the FR1s at this point slightly.
TL;DW: Compared to the FR1 shell, the Neo shell is wider and flatter (less vertical toe room, more horizontal by about 1-1.2cm above first toe-end lace holes). Neo shell provides a lower ride height than FR1 (there is wheel groove in toe area of shell and approximately a centimeter or so lower). Neo cuff is more flexible than FR1 (more forward flex) and cuff strap sits lower than on FR1 (likely also contributing to increased forward flex). Neo liner seems to be a nice upgrade from stock FR1 liners. I wish they had a 7 hole frame mount system like FR1 instead of 5 hole. Overall I like the skates, have had lots of fun on them, and am happy I bought them.
Follow-Up Video: • Part II: HUGE Issue Wi...
Inline Skate Space Discord: / discord
#inlineskating #rollerblading #review #skating #hobby #insta360 #amarillo #fun #frskates

Опубликовано:

30 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@PokeProfWill Месяц назад

Please take the time to watch the follow-up to this video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IEoZvKXDLts.htmlsi=fg19IyAylz7r-T2S I have had some issues with the Neo 310s that need to be noted

@TS-qg1fm 2 месяца назад

Thanks for taking the time, first Neo review I have seen in my feed!

@louisthomas8147 3 месяца назад

I appreciate the in-depth description. I've had my eyes on these since I first saw them floating around on Reddit but I was apprehensive as I have wide feet. I'm happy to hear that they have a good amount of horizontal space 😁 Thank you ❤

@tyyao2000 3 месяца назад

Intuitions are so good I make sure I "use up" the og liners in all of my skates first before switching over--if I start on intuition I would literally never use the kit liners. Thanks for sharing your exp with the neos man

@PokeProfWill 3 месяца назад

Thanks for watching and dropping comment! I have been selling the og liners on eBay to get a little cash back since the Intuitions feel so great but I’m gonna keep the Neo liners (they look sooooo good)

@campfirestories744 3 месяца назад

I just got the 80’s love em

@PokeProfWill 3 месяца назад

Very nice!! 🔥 Curious how the single density 80 feels compared to the dual density shells!

@chrisplayz253 3 месяца назад

I got some frx 80s they are nice and supportive I can literally lean my shins into the front of the skates and everything just locks in nicely

@PokeProfWill 3 месяца назад

@@chrisplayz253 FRX were my first pair of FR Skates and they are excellent skates! 🔥

@Cj3homie98 2 месяца назад

Monster setup brother

@fussellino1 3 месяца назад

Good, quality review.

@kevinkev1530 2 месяца назад

Beautiful boot wish they made a aggressive version

@PokeProfWill 2 месяца назад

A UFS Neo would be cool! Maybe if the 165mm models sell well they’ll think about a UFR model 🤞

@CatzzSkatesFamily 3 месяца назад

Nice skates man! With the wider base it looks like you could still do all the normal moves you normally pulled off. Does this feel more comfortable than your older skates? I’m on K2s soft boots and they are all narrow fit, which I like. I’m still looking into hard boots. I got some large bills to pay off prior to buying hard boots. Nice skate flow session and glad you spent time with family on Easter weekend. ❤

@PokeProfWill 3 месяца назад

They are pretty comfortable! I think I still prefer the FR1 shell slightly but it’s really close right now; I need to skate on the Neo some more! They are roughly 1-1.5cm wider than FR1 shell at widest toe part but also flatter than the FR1s Hope you got to spend some good holiday time with the fam man! 🩵🥚

@marcograndotto6615 2 месяца назад

Wow, I needed this review. I just wanna ask you, what’s like the lateral support compared to FR 1? It’s that enough to go deep edges and trust the cuff support (wizard skating😅)?

@PokeProfWill 2 месяца назад

Sweet! Thanks for watching/comment/sub 🎉Lateral support felt just as stable as FR1s to me; I did not notice any lack of lateral support. FR1s are definitely a little better for the wizard skating due to cuff stiffness. UFR model probably best FR wizard boot: get the stiff cuff of FR1, no raised heel (so deep/flat sitting heel), and UFS mounting 🙂

@marcograndotto6615 2 месяца назад

@@PokeProfWill I actually already have the ufr, it’s really good for wizarding, it has the raised heel but the flat ufs sitting is obtained by lowering the plastic under the heel. It’s not a problem at all for me. If you say the lateral support is just a little bit less than the fr shell, I think it will be a good boot to try out. Maybe the single plastic version is better and harder, but this one color is incredibly nice

@PokeProfWill 2 месяца назад

@@marcograndotto6615 nice! I will have to try Neo out with my 165 mount ARC frames! I also have UFR for an aggressive set and they feel extremely nice to skate in; have thought about buying a UFS wizard frame for them. I am not as experienced on wizard skating to be honest but can see how the increase forward flex on Neo would make harder during lions or other one foot spin moves

@marcograndotto6615 2 месяца назад

@@PokeProfWill I think I’ll try the neos anyway. My biggest concern is always about the lateral flex, not the forward. During lions I wanna trust the cuff keeping the lateral force so I do t have to compensate a lot, wich I find distracting from what you are doing.

@pangiokuhli255 3 месяца назад

I’ve ridden a pair of FR1s for the past 3 years and they have been wonderful. Really torn on if I should get a new set of FR1s (mine are beat and 1 size too big) or go for these. Will be skating with an Endless 90 frame. I do urban with lots of jumps down 4/5 stairs. I’m a little worried the extra flex of the Neos won’t give enough support for larger drops? What do you think?

@PokeProfWill 3 месяца назад

My main frame of choice is also the Endless 90 😎 Honestly I’d stick to the FR1s if planning to do lots of jumps for the stiffer cuff. The Neo 2 80 is single density shell though 👀 may be worth a look into those if the FR1s aren’t wide enough to ride a lower size for you

@pangiokuhli255 3 месяца назад

@@PokeProfWill I think they’re my favorite frame by far. Much sturdier than NN or Rockin’ and the 90mm is a perfect jack of all trades. I love how sturdy the FR1s are although they are a bit on the heavy side. Do the Neo 2s feel similar in weight? I think I’ll probably go with the FR1 but man the Neo 2s look fantastic. Thank you so much for the in-depth review!

@PokeProfWill 3 месяца назад

@@pangiokuhli255 I agree the Endless 90s hit that sweet spot on maneuverability/stability! They are amazing frames!! They seem to be very close to same weight as the FR1s; I could not tell a difference in weight and felt same to me in that respect Thanks for the comments! 😎

@ericbernardi8116 3 месяца назад

Thanx so much 😄 A little extra width compared to FR1 might be exactly what I need... 42 shell is too big with Intuitions but 40 shell is a tad too narrow at the toes... I don't need more flex though 🤔 maybe I should go with the single density variation, sadly won't come in that beautiful teal 😢 There is still no neoprene toe part at these liners, right?

@PokeProfWill 3 месяца назад

Thanks for watching! There is no neoprene toe component, correct! I am curious how the single density shell feels!

@ericbernardi8116 3 месяца назад

@@PokeProfWill If I'll buy the Neo single density I'll let you know 🙃

@andrewjohnson1253 2 месяца назад

I’m trying to get a pair of these. Thanks for the info. Would you suggest sizing up or down? Do you think I could throw a different frame and some 90mm wheel set up . Basically the fr1 90mm Would love to switch between the two set ups. Thanks 🙏

@PokeProfWill 2 месяца назад

I would go with the FR1 sizing chart for these personally (that’s what I did and they fit great using my FR1 size). They are little wider but also less vertical toe room. I have used my Endless 90s on the Neo duals and they also feel really nice that way! I have gone between 3x110 and 4x90 rockered; I need to try the arc frames on Neo 👀

@bladeshred01 2 месяца назад

Those look good, fit to match🤘...Did you by any chance try the stock liners with the stock laces coming from the boot into the liners, similar to the way it's done on the FR1s?

@PokeProfWill 2 месяца назад

Thanks!! The color is definitely my style 😎 I did not try to lace the top holes in the stock liners but I probably should have tried to see a if a difference!

@bladeshred01 2 месяца назад

@@PokeProfWill indeed, I myself lose power transfer and feeling when I lace them separately. The symbiote one piece fit is amazing on FR1s but that's part of their original design. For me the whole goal of inline skates is for them to feel like an extension of your body and not a clunky piece of equipment attached to your foot. I've been lucky that every FR boot I've ever owned has felt just like that.

@PokeProfWill 2 месяца назад

@@bladeshred01 thanks for sharing that! I am going to put the stock liners back in and see how it feels to lace top stock holes with shell! I usually use Intuition Premium and that one definitely feels better having separate laces for liner and shell imo. Although on Premium you have option to lace entire liner that is not on FR (top of foot portion). If the Premiums fill shell volume and wrap feet nice and tight (for my sizing they do) then they feel amazing and very much like an extension of the body 😎 I have 6 pairs of FR and love every single pair 🩵

@danielromo781 2 месяца назад

Great video Will!! I wanna get them, but as same as you I'd change the liner for the intution one, I have my FR1s in shell size 41-42 with Intuition 43, in your opinion, should I buy the Neos in size 42 to be able to downsizing?, thanks!

@PokeProfWill 2 месяца назад

Thanks for watching!! I am pretty familiar with the FR shell sizes: what is your foot measurements in length? And are you about normal width?

@danielromo781 2 месяца назад

@@PokeProfWillthanks for your reply, left foot 278 mm and right one 276 mm, and yes I'm normal width. My FR1 intuition fits me perfect, considering I have FR intuition liner and this would be the one I use with the Neos. Once more thanks for your feedback!

@PokeProfWill 2 месяца назад

@@danielromo781 yeah if you are currently in the size 42 FR1 shell fine with those measurements then the Neo 42 shell should be good tight fit as well in the length! They seem to be same length as FR1s. Toe box little wider and flatter on the Neo so something to consider there but my Intuitions fit perfectly in both the Neo shell and the FR1 shell both size 44 shell 😎

@danielromo781 2 месяца назад

@@PokeProfWillthank you Will, I appreciate your help. Cheers.

@isaacomplex 3 месяца назад

Hey Will, I'm curious, wouldn't the thinner intuition liner be loose inside this shell since you didn't downsize it?

@PokeProfWill 3 месяца назад

I am using the Intuition Premium (28-28.5) which fits inside the size 10 shell very well (size 43-44 shell). The regular liner is super tight fit and the Intuition is a little more relaxed; however, once the intuition is broken in I will add a 4mm insole that Intuition sells for about $9 per pair to fill up a little more space. My large foot measures 278mm for reference and the lower size shell is 280mm rather than 290mm shell as I am using here (I am assuming that the shell sizes are same internal length as FR1; seems to be so)

@kevinkev1530 2 месяца назад

👍🏾👍🏾

@marlonmj5 3 месяца назад

Did you notice a lower ride height? Or can you see one if the fr1 is next to it? Thanks for the review!

@PokeProfWill 3 месяца назад

I messed around on the Endless 90 on the Neo (usually I use them on the FR1s) and there is a noticeable lower ride height by maybe a centimeter or so. There is a wheel groove in the front part of the shell. When I get the 90s back on the Neos I’m gonna get out the calipers and measure (will report back here when I do). Thanks for watching!

@marlonmj5 3 месяца назад

@@PokeProfWill thank you! I was wondering since it’s a selling point from the FR description but they don’t give actual data. Thank you :)

@PokeProfWill 2 месяца назад

@@marlonmj5I finally got the chance to measure shell toe distance to worn 90mm wheels (edit: Endless 90s) on my Neos vs FR1s: I have that the Neo is 18.2mm from front wheel top to bottom of shell toe; FR1s measure in at 24.1mm measuring the same spot with my calipers! Hope this info helps! I will have the skates half assembled for rest of day at least if want any other measurements!

@marlonmj5 2 месяца назад

@@PokeProfWill Hello! Thank you so much for taking the time to measure precisely! So it’s similar to a Next or trinity mounting boot. Thank you again!

@Rechza 2 месяца назад

Is it the same shell length in neo size 40 compare to fr1 size 40 ?

@PokeProfWill 2 месяца назад

For my size 44, Neo shell is same length as FR1 44 shell (Neo is shell 43-44 and FR1 is shell 10) Shoptask has a size guide out (first one I have seen for the Neo): it says that the size 40 shares a shell with size 39 for Neo 👀 in FR1 size 40 is stand alone shell (shell 7 with internal shell length at 270mm; this is my wife’s size). So Neo apparently uses 39-40 shell for size 40 and Shoptask recommends having 255mm foot length for size 40 Neo. Hope this helps!