Parts Canon 3 sensors and still not fixed. Here's how I fixed it.

Подписаться 223 тыс.

Просмотров 2,6 тыс.

50% 1

I work at Brothers Motors in Snellville Ga if you want a estimate on repairs. Please note we work on appointments only. So look us up at www.BrothersMotorsLLC.com and set up an appointment. Please NOTE: The bulk of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy

Авто/Мото

Опубликовано:

24 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@69Dartman 11 месяцев назад

Good to see part two 👍

@DougsHomestead 11 месяцев назад

That's a new one on me. Will not forget this. Thanks!

@jeremyrawls5896 11 месяцев назад

Great video Timing is essential

@toledotransmissions 11 месяцев назад

Mopar box we already in the right direction

@mph5896 11 месяцев назад

Once you unbolt those cam gears, the engine needs to be retimed. That includes setting #1 to TDC and bolting on the timing plate tools to the back of the head. Then setting everything up with belt on/tensioner activated, once set up torque the camshaft gears.

@jthonn 11 месяцев назад

That is why JT emphasized the marks, on what he is doing. I noticed too that the sprocket has a keyway, so it only goes on one way. Line up the marks, and you are good to go.

@mph5896 11 месяцев назад

@@jthonn I did follow up on research on this. His first video indicated this was a 2008 Charger with the 3.5. I looked up service procedure for 3.5 timing belt and they did not mention the special service procedure of the camshaft sprockets were unbolted. I also looked up 2007 and 2006, both those do list the special cam lock procedure to reestablish timing if the camshaft sprockets are unbolted. So with this 2008, you are correct. Looks just like a bolt on and go.

@jthonn 11 месяцев назад

No worries man, that is good info for some folks, but JT always talks about timing and TDC when he is doing timing belts and such. Have a great day.@@mph5896

@Goodwrench1920 11 месяцев назад

@@mph5896- That was a very good response and explanation. You made me re-think that one too. Excellent job.

@anthonygallegos3269 11 месяцев назад

@mph5896 Okay key board warrior. Im sure the creator of the video has done 10x as many timing jobs you have. Theres a reason he is still employed and working on cars. Dont be that guy who tries to tell him how to do his job.

@mmytacist 9 месяцев назад

another youtube mechanic, wrenching with kenny, did a similar diagnosis on a truck. junk yard engine that had been in accident and somehow that ring got damaged. he manually bent the ring with slots back into roughly circular shape, and that fixed it. (it was his own vehicle at this point)

@nevamind932 11 месяцев назад

Wow that's a long bolt!

@86azarate 11 месяцев назад

Bro! Autozone diagnostic techs are the best!

@robertnickell2610 11 месяцев назад

Thank you

@serious_philosopheegeez2294 9 месяцев назад

Thanks man

@jthonn 11 месяцев назад

Man that is a long bolt. Nice video JT, I wish you could work on mine.

@OnlineMechanicTips 11 месяцев назад

Whats up my guy..Yea that was crazy long, glad I didn't have to lift up on the engine

@tigletcat 11 месяцев назад

When I reuse a belt I mark the belt as well. This ensures that if the cams move slightly everything still is in time. Is it overkill? Maybe but it gives me piece of mind.

@bassinitmac1T 11 месяцев назад

Dudes a beast, wish I can get him on my 2003 Chevy crank no start issue, OBD 2 is throwing code after code with 3 sensors and still a crank no start l, help😮

@FixIt1975 11 месяцев назад

Chevy full size truck?

@theultimo 11 месяцев назад

My 3.5l luckily hasnt blown timing but alternator went and it was quivk

@hermanpeters549 11 месяцев назад

Why not replace belt since you are there

@FixIt1975 11 месяцев назад

It really isn't hard to pop the cam sensor out and go in there with a screwdriver and see if the tone wheel is loose. But i guess that's too technical for the Auto Zone master technicians 😂😂😂

@dannybryant6873 11 месяцев назад

Any idea how a hole in a piece of metal goes bad?

@WrenchingMafia 11 месяцев назад

Hey brother I need your help 2009 ram 1500 ac compressor was locked up I replaced it with new one and new one does not want the clutch to engage enabled to see if there was a fuse or what to look for

@Jspahni1 11 месяцев назад

My 3.6 is throwing similar codes, now its chooching smoke- i found cyl 4 plug fouled and I'm thinking bad rings

@user-sk7jw9vk6b 11 месяцев назад

Regards I changed the lifters and cam on 5.7 hemi do i have to change oil after 800 miles or just normal oil change interval ? I changed lifters and cam and cleaned the engine then i put 5w20 amsoil with their oil filter currently im 300 miles on the new lifters and cam

@imfloridano5448 11 месяцев назад

I would have replaced that tyming belt and water pump while its disassembled to extend the life of the engine

@anthonygallegos3269 11 месяцев назад

@imfloridano5448 No you wouldnt, you would ask the customer and get the work approved first. You must be a rookie, lol what an idiot.

@patrickmcdonald3427 11 месяцев назад

Chrysler junk.

@StationRussification 11 месяцев назад

So embarrassing listen to your explanation of how something works when U not only give incorrect information U pretend to know what U R talking about. Let me teach U so U have it correct the Cam Sensor looks @ #1 cyl & tell the Crank Sensor where TDC is then it signals the timing for the Fuel Injection.

@OnlineMechanicTips 11 месяцев назад

No sense telling me Mr Clown Man. I explain it the way I understand it or see it. If you want people to know how you understand it, simply whip out your phone and make a video and tell them on your channel. This the way I explain it over here on my channel..Go ahead, try it, you can garner the attention you seek over on ya channel..FOH

@StationRussification 11 месяцев назад

I give 2 shyts about channels BUT IC where your professional attitude is. Seriously a shame how U fail in many regards in attempts @ auto repair, I am sure your parts dept & writers laugh @ all the mistakes & cover ups U make.

@OnlineMechanicTips 11 месяцев назад

@@StationRussification Well if you dont give 2 shits simply shut ya trap. Im not interesting in what you saying neither are any of my 170k subscribers. So just grab you a mirror and talk to yaself buddy. I told you, I got this. Go get you a new hobby or something because you even suck at trolling youtube videos. FOH