Parts Don't Exist, So I Made Them! // 2UZ V8 1974 Celica

Подписаться 681 тыс.

Просмотров 157 тыс.

50% 1

Quality Car Builds Don't happen Overnight!
Support This Channel❤️
⭐️Merch: shop.sarahntun...
Patreon: / sarahntuned
Amazon Store: www.amazon.com...
Website: www.sarahntune...
Instagram: sarahntuned
Facebook: sarahntuned
X/Twitter: sarahntuned
Special Thanks to my Patreon Support!
Britt F.
Chad B.
Col. L.
Curtis S.
Daniel F.
Darren M.
Dave
David L.
Jeffrey P.
Josh H.
Kevin C.
Mark L.
Meghan "in Seattle"
Nenad R.
Ray I.
Terry S.
Todd C.

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@christopherbiomass7155 6 дней назад

"A narrower tire shtretched onto this wheel would solve the situation, but I'm not about that life." Thank you. Thank you. From the bottom of my heart, thank you. 2:41

@PiDsPagePrototypes 6 дней назад

Seconded. Radial Tyre sidewalls are meant to balloon out, not be stretched inward. It's important to how they work to keep the contact patch flat on the tarmac, as well as for decent ride compliance.

@bongodave13 6 дней назад

Yup. This car needs the right tires. You can't compromise on that. It will look factory when it's done.

@craigvirgin8461 5 дней назад

Amen to that!

@jgreenjeans 6 дней назад

16:22 "What'd I do with my other bolt?" I'm so glad everyone else seems to share these moments because I feel really dumb at moments like this.

@ro63rto 5 дней назад

Wait until you are looking for it for 5 minutes then realise it's in your other hand 😂

@George-rk7ts 6 дней назад

Your videos combine camerawork and narration that both have a perfect blend of technical expertise and friendliness. That's damn rare anywhere, even more on the internet. Stay Sarah!

@InsideOfMyOwnMind 6 дней назад

Meant as a genuine compliment, I love that Sarah reminds me of Wednesday on the spectrum. It's adorable and her professionalism shines through it.

@garyworokevich2524 6 дней назад

I know this is said all the time.......but it is worth saying again. Your attention to detail is absolutely brilliant.

@inmyopinion6836 6 дней назад

I can't believe Jay Leno hasn't recruited her yet!

@bjshifflett5408 6 дней назад

@@inmyopinion6836 I keep trying to figure how many of the comments are techs at the Jay Leno Garage.....

@oscarwilde5473 6 дней назад

@@bjshifflett5408 ... have you been reading my diary ??

@dadgarage7966 2 часа назад

@@bjshifflett5408 Likely none.

@mjs7100 6 дней назад

I remember when these old japanese cars were considered "disposable and called rice burners". I appreciate the care you put into restoring this survivor.

@jeffreyquinn3820 5 дней назад

Look at the cars the people who called them rice burners drove. They weren't the best decision makers.

@spdcrzy 6 дней назад

You're turning into a proper fabricobbler! :D

@I.M.A.Panther3619 6 дней назад

Never seen an auto restorer person so dedicated to perfection …… amazing !

@guyfaux5010 6 дней назад

I love Sarah, says every motorhead who follows her. This chick is perfect.

@manythingslefttobuild 6 дней назад

Great to see the BBQ shop didn't move too far. The inner fender clearance turned out great.

@lightbarssirensaustralia 6 дней назад

Brilliant build and thank you so much for all the details.

@jody024 6 дней назад

Her attention to detail is next level and I love it.

@zendude06 6 дней назад

‘That’s what the robot said” classic Sarah!

@Springfield_Duck_Sammich 6 дней назад

❤Sarah not only the loveliest Cartuber, but actually WRENCHES, fabricates & swaps. She's a badass, & i think she's a metalhead... Which is sooooo dope! ♥️ Keep it up Sarah!

@Noukz37 4 дня назад

I'd say she's more probably a shteelhead!

@mostcom 6 дней назад

So loving every one of these little conundrum filled episodes. I never want them to end. I really feel like you are right here in the shop. The clearance issue was resolved as I would have done it. More than proper. The journey is the achievement with me. It is more immersive than the experiences of concluding the project, if it is for yourself.

@Josh-u9b 6 дней назад

@@mostcom custom builds are an ongoing wtf. Good job on ONE at a time⭐

@raymondroberts4910 6 дней назад

Sometimes if you warm up your plastics with a heat gun, they soften up as to not breaking as easily

@creamwobbly 5 дней назад

Uh-huh uh-huh is that what the boys are doing now? Mansplaining heat to women who live in the desert?

@waynesworldofsci-tech 6 дней назад

I’ve fallen in love with your build. Can’t wait to see you drive it when finished! You do beautiful work. That car is a work of art.

@billiebobbienorton2556 5 дней назад

The story that *N E V E R* ends. Never. Wake me when its over.

@LostYogi 6 дней назад

I wish more people had such nerdy humor!

@NoraJohannes 6 дней назад

Your videos are always so insightful and intelligent. Thank you for your contribution to the education and development of the community!📹⚫️💵

@johnbandy8745 6 дней назад

Slush Puppy 🎉 I remember those from K Mart snack stand as a kid.

@michaelcousins2526 6 дней назад

Slush puppy and K Mart, Pepperidge Farm remembers (ok, Im old enough to remember them both too lol)

@bjshifflett5408 6 дней назад

K-Mart Slush Puppy's are the blue light specials of my childhood

@Josh-u9b 6 дней назад

Great job on the rear inner firewall massage.....not hacked🤙

@leowalless9328 6 дней назад

YAAAAAAAAY! I'm in south east Asia so this is going to have to wait because I don't eat lunch for another 4 or 5 hours, but 23 comments? Gotta just nip in here and tell you that I loooooooooove your show, especially the focused builds like this Celica which I've followed from the beginning. Love it, love it, love it. Cheers

@christophernickell5744 6 дней назад

Sarah, when you put the car on the ground and load the suspension with the weight of the car, you’re going to have to clearance your fender well up higher because your tire will be higher in the well. IMO 😊

@puckcat22679 6 дней назад

I thought that at first, but go back and watch again... She sets the car on the ground before final check. Yes, the engine might make a little difference, but that suspension isn't exactly soft. It'll probably be fine.

@SarahnTuned 6 дней назад

@@christophernickell5744 already did

@stevemawer848 5 дней назад

@@SarahnTuned We all knew you would've. 🙂

@YoureRetarded-y8t 3 дня назад

@@SarahnTunedyou’re weird

@stephcooper5998 5 дней назад

Sarah, your OCD capably aided by an amazing sense of humour, restoration, mechanical abilities makes you my number 1 RU-vid channel. People, let's get this channel to a million subscribers. Like, comment and share.

@newtonfirefly3584 5 дней назад

@stephcooper5998; It seems 'nice' that You desire to promote the idea about the what You appreciate about Sarah along with her posted videos on this channel. However, promoting the channel on the comments is like "speaking to the choir", since those that comment more so those that may read them, are certainly among those watching, appreciating them. Thus, useless, ineffective, especially with the last three "like, comment and share". Then You clearly have the common misconception about OCD; Obsessive Compulsive Disorder - a label by phycologists, about an apparent, claimed disorder, dysfunctional mental condition. Certainly Sarah does not have any disorder nor dysfunctional mental condition. Sarah clearly has good, well and high focus, concentration, with good project planning, high level expectations, goals, implementation, execution, within high level to near perfection, high level workmanship, results. Sarah may be considered extreme, excessive within these by most humans along within dedication, persistence, consistence, determination, which many human lack, especially more so within recent years worldwide [Socialist/ISM, Commune/ist/ISM, Fascist/ISM, Union/ist/ISM, Corporate/ist/ISM, Industrial/ist/ISM, Capital/ist/ISM, Marxist/ISM, et al have these negative affects, results]. Sarah also dedicates her entire life into all of the projects, work, including reviews, videos, editing, recording, etc. thus is her "Life" by choice. Perhaps You can use some of the good aspects, attributes, characteristics Sarah uses, shows, presents within Your life, pursuits, goals, etc. to Your personal use, benefit, with positive growth too ? All The Best, Sincerely :-)

@ygstuff4898 6 дней назад

Along with the humour and sincere observations, your attention to keeping things as originally intended (keeping things honest) is great to watch. The Celica will appreciate the quality time to do it right.

@walkerhawes2200 6 дней назад

I love the amount of detail you are putting into this car. Your diligence is also to be appreciated. Can’t wait to see the finished product. And a little tip, if you want to clean rust and corrosion or even just age off of chrome, just ball up a little aluminum foil and a little bit of water and it will look new again.

@Primus54 6 дней назад

I so enjoy these videos where you have to do some fabrication and also have to create new parts to accommodate your mods. Clearly, you do “shapes” well! Thank you, Sarah. 👍👍👍

@SpaceEngineerErich 6 дней назад

Sarah's instrument of choice is not blunt, it's a scalpel. And that's why we love her. =)

@BiornBear 6 дней назад

I needed this Sarah, just found out an hour ago my dad has Pancreatic Cancer so this is taking my mind off of it so thank you. Please send out a prayer 🙏.

@topherbec7578 6 дней назад

I've started the restoration of a 73 Firebird so I've been consuming a lot of car restoration videos. Your videos are detailed and you impart a great deal of knowledge plus your humor makes it a pleasure to watch.

@KevinPlemons64 6 дней назад

If I ever restore a car, I'm going to go back and reference all your videos as the proper way to do it! Great job on all your projects! Thanks, Sarah.

@BradleyBellwether-oy2qi 6 дней назад

As a kid, blue raspberry Slush Puppies and a K-Mart sub sandwich was the only reason I ever wanted to go shopping with my parents.

@ianthepelican2709 5 дней назад

Back when Smurfs were all the rage. Yup.👍

@IronmanV5 6 дней назад

As the late Bob Ross, fellow Air Force vet, would say about the paint, you had a Happy Accident. I have no doubdt that he would find your work to be a masterpiece.

@bobuncle8704 6 дней назад

Sarah, you’re so right. Most folks would have just gotten a big hammer. This is why I like your work so much. It was a bit of an effort, but the way you dealt with that clearance issue looks so much better.

@manifestSD 6 дней назад

Cannot express how difficult it is to spray black oil epoxy direct-to-metal without sagging it. 🌸 BBQ Pilot Dave! That guy never disappoints.

@knifeknerdreviews4609 6 дней назад

Highlight of my Week is seeing More Sarah and More Celica!

@acme9538 6 дней назад

I love how she says 'Sell-E-ca' every time . . . it's fun !

@vanmccleaf5083 6 дней назад

Loved Slush Puppies as a kid!

@SarahnTuned 6 дней назад

Same, do you have a bunch of autoimmune gut health issues too now? 😂

@vanmccleaf5083 6 дней назад

@@SarahnTuned yeah but not sure if it was from them are in the Marines that caused it😂

@chrisecoff6155 6 дней назад

Girlie, I wish my late father could have seen some of your vids. You have the exact same eye for detail - and the same OCD tendencies - that he did. He was an architect by trade, and a self-disciplined master craftsman as avocation. Whether it was our annual garden, or the model railroads my brother and I built alongside him, or even my earliest efforts as a budding greasemonkey, Dad was always on top of things with his sharp eyes, practical knowledge, and sage advice. Dad was a fellow who spent an entire winter building an HO-scale wooden railroad trestle {40 scale feet high, and 600 feet long} BOARD BY BOARD!!! We're talking over 6,000 individually cut balsa-wood "timbers," "crossmembers," and "stringers," complete with all the nuts, bolts, cables, and other hardware that the prototype had. Oh yeah - Dad also drilled EACH bolt or cable hole himself, until the cost of replacement bits for the Dremel started to eat into the weekly grocery budget a bit more than Mom was cool with. I'm fondly reminded of good old Dad with each new video you put out, Sarah. You are well and truly Gifted, my Dear Lady. And don't you EVER forget it, dig?😍😍

@elpepito957 5 дней назад

Sarah on every thumbnail : 👍

@MADMAXMALONE1 6 дней назад

Last time I saw a Slush Puppy was in 1984 romping around in my yard in Appleton Wisconsin when my 9 week old Black Lab got out in a snow storm. He had fun as did I trying to get him back in the house!

@jmess1830 6 дней назад

So excited for the first drive of this project. Amazing craftsmanship.

@coratoraYT 5 дней назад

I'm always impressed, shocked, and scared at the lengths you go to make this better than factory custom build happen. I'm constantly floored at all the work you put into it.

@Gersberms 6 дней назад

And here it is!

@MDBenson 6 дней назад

Excellent job on the arches, that kinda work takes patience and understanding the construction of the car... plus it's structurally, and ethically, better for the car to not beat the crap out of the arch in that spot. Also, yes, I do indeed know what a Slush Puppy is. That blue and red logo was a huge part of my childhood. The magazine store we used to go to in town, and I latterly went into every week for PC games magazines had one of the machines on the counter for years.

@jakedamus111 6 дней назад

Nice! I needed my Sarah fix! ❤🎉

@hodgeac 5 дней назад

You should give those rusty parts a soak in evapo rust. The stuff is crazy good and doesn't harm plastics. Sometimes parts might need a little brush action for stubborn spots and a second soak but the results are incredible and fast.

@mikefrench3800 6 дней назад

I remember slush puppies

@brealistic3542 2 дня назад

The quality of older Japanese cars is truly amazing You can even see it in something as basic as my old Celica bolts.

@Endy5_Still_Alive 6 дней назад

Sarah......I hate to be the one to tell you........but you missed a spot.

@UNCLEBGA 6 дней назад

Oooooo fighting words!!!

@jody024 6 дней назад

Oh noooo, anyway. 🤷‍♂️

@sonparabailar 6 дней назад

*shpot

@timothyupleger7007 6 дней назад

Oh....You're just being cruel! 😊

@Endy5_Still_Alive 6 дней назад

@@UNCLEBGA It was next to the thing with the bolts. You know, the pins where the doohickey is nestled. It was over from that and down from the wurbler. Can't miss it. 😂

@bsmirnov 6 дней назад

"already accounted for" - is the default answer to anyone having doubts about Sarah's measuring skills. 📐

@douglaskaye1395 6 дней назад

Thanks!

@trails247 6 дней назад

3 hours.. 30k views.... This lady is awesome 😎. Love the Sarahisms. ... The hotness.... And I have no idea about cars .. but she is very intelligent in this field and makes me happy she had a YT channel.🎉

@dreadpiratekristo 6 дней назад

Got my Celica tshirt today! You used nice blanks, it's an awesome tshirt!

@aloysiusbelisarius9992 6 дней назад

It's nice to be able to hear her again; what she says and how she says it were the main appeals that kept me watching. So, she has some experience with cutting and welding unibody panels...! That's a lot more than can be said about me. I could sure use assistance from somebody like her in replacing Frankenstein's left-front fender.

@jamiegroves1761 6 дней назад

Thanks mate ❤️ the way you Roll 😎🍺👍🇦🇺

@jimgermain6622 3 дня назад

Not only do I know what a slush puppy is, my stepdad worked for the company. We had a slush puppy machine in the garage that came out for parties. Nothing better than vodka slush with any flavor you wanted!! Oh yeah, the Celica is looking great as well!!

@FrankySilverFace 6 дней назад

Love this car! Thx for content.

@70sAirForceBrat 6 дней назад

To get old plastic clips out without destroying them you can use a blow dryer not a heat gun and get them hot without melting them. That makes them more flexible and unlikely to break when removing them.

@SarahnTuned 6 дней назад

@@70sAirForceBrat or do what I did

@davidsimmons6197 6 дней назад

New Sarah video!!! 🥹

@roberttribbie9179 6 дней назад

Just info, next time you get stuck putting bushings in like that, get a long bolt and big fender washers (I'll bet you see where this is going) put the bushing in, put the bolt through the bushing, fender washer and nut on other side and use an impact to tighten the bolt/squish the bushing in. Have fun

@hutch2142 6 дней назад

You have done some amazing shit, but not breaking the nail after hitting it with a hammer has to be top 10!

@SarahnTuned 6 дней назад

They’re durable 👍🏻

@matto9734 3 дня назад

Your level of commitment really is unparalelled + the humor and the editing. Nice hair job too ;-)

@billmagorian490 6 дней назад

The engine bay after all the anal work you did sparkles like a diamond. As I watched this video I realized that my focus on your amazing car mechanic work kept me from seeing how you have worked so hard to create these friendly engaging videos. You make us feel welcome and friends. You have a very sensitive side Sarah. Never lose it.

@craigpennington1251 6 дней назад

Another Sarah How To video that is second to none. Must eat. Don't put it off. You can only do so much before body shut down.

@WessyD123 6 дней назад

Woohoo! Members only video!! First comment btw 🙂

@mostcom 6 дней назад

🏁

@cnorton1us 6 дней назад

The attention to detail is amazing on this project, which is why this isn't just going to be a cool engine swap but a truly re-engineered car. So many other "builders" just stuff in a V-8, maybe do some basic drive line and suspension upgrades, and the car rips itself apart the first time they try to give it the beans. Looking forward to seeing what sort of exhaust magic you have up your sleeve, and of course the first drive!

@user-ho5xe2nu8o 6 дней назад

Since you asked, a slush puppy is Alsups answer to a slurpee.

@dag1869 5 дней назад

I'm clueless about cars and yet watching Sarah at work is so cathartic for reasons I can't explain to myself!🤔

@-ZIO 6 дней назад

What a journey this little Celica has been so far. Good Shtuff!

@TrishWilsonHot 5 дней назад

Life is simple; it is we who make it complicated❤❤

@CitEnthusiast 6 дней назад

Install bushings by using a large bolt and nut with fender washers. Just assemble the bushings outside the part with the bolt long enough to get the nut on, then use a power tool to screw it all together, done with no impact. Nice job on that epoxy! I need a fabrication shop like you have access to.

@AshlynnCairns 6 дней назад

No lie, this is probably the most entertaining thing I’ve watched.

@pauloconnor7951 6 дней назад

Rust converter on the rusty patches only of the 2nd H/L base. The kind that leaves a protective -film. Then just clean as you did. Get a padded cap to wear working under/ in engine bay. Yes regular- good food !!

@Mytwocentsisallicanafford 6 дней назад

As much as I appreciate your attention to detail not many else will unfortunately something I've come to realize later in life but passion is important and why I watch you amaze me every week

@jinsvi 5 дней назад

The car is fantastic. The hair is beautiful.

@johnnyroese 5 дней назад

Sarah is the coolest 😎

@3ducs 6 дней назад

The only podcaster who's ads I let play all the way through, because she benefits from that. Your smooth brained fan from New Hamshire.

@charliestevenson3500 6 дней назад

With a paint job that came out that good, you should be allowed to be proud of yourself because it was excellent work!

@canuckfobroader9553 6 дней назад

Jesus, your attention to detail is amazing!! Keep it up, great video as per usual!!

@Diablo01G 2 дня назад

I appreciate the detail that you do. On the vehicles that you do You're a very talent person. Thank you for your service in the Air Force. God bless you..

@robertd2363 4 дня назад

Sarah you are incredible, the Celica is looking better than new ❤

@CampainAlaska-ep4sd 6 дней назад

Glad to see you are spot-on regarding the powder coating short falls.

@rickmaudlin2160 День назад

Love this project ! Sarah you are doing such an awesome build

@3henry214 6 дней назад

Wow... watching you rework the sheet metal to gain the additional tire clearance... sheer poetry in motion.

@timothycheuvront8284 6 дней назад

This is what used to be referred to as Craftsmanship! A relatively lost art unfortunately. Sarah is a master!

@AbstractCatsMedia 5 дней назад

Absolutely brilliant work, Miss Sarah! I love cars, but not really about working on them, but so cool to watch amazing car people like your self work. My favorite car RU-vidrs are you and Doug Demuro. Both of you guys are funny as hell!

@rockman4699 6 дней назад

Aloha Miss Sarah! Thanks for brightening my evening with this video

@SarahnTuned 6 дней назад

🤙🏻mahalo

@morethanaveragejoe8224 6 дней назад

A Slushie is a flavored cold ice-based beverage from Icee. The "no whammy" reference is from the Press Your Luck gameshow that started in the early 80's and petered out around the year 2000.

@tonydacosta2273 5 дней назад

You are one of the the coolest people ever. You absolutely rock Miss Greenwood!

@ericwilkes238 6 дней назад

I had one of these cars back in the day and wanted to put a v8 in it never could afford it so now i have a 65 corvair that i sit on a s10 frame with a 350/350 i dont do as good as you do you are the best i ever seen i think i love you.

@jergervasi3331 4 дня назад

Slush Puppies! Hell, yeah! And this car is just coming together SO beautifully, your details really add up to greatness.

@hobbes1069 6 дней назад

Love watching you start your Bronco with your feet like there's a clutch but there's not!

@SarahnTuned 6 дней назад

@@hobbes1069 um.. so my Bronco is a manual transmission.

@hobbes1069 5 дней назад

@@SarahnTuned whoops 😱! How embarrassing! It was a quick shot and I missed it, but at least I got a personal reply! 😜

@hippotek1 5 дней назад

InLOVE your atention to detail, especially concernign the metalwork for the tires to clear the wheel wells. SOOOOOO nice!

@WhyNot-sb9kk 6 дней назад

I cant wait to see this project completed!

@ItWillRun73 6 дней назад

If everyone had your attention to detail, we would build more, fix more, and throw less away. Great work as always! (on and off camera)

@Fexlamtionpnt 6 дней назад

Love your playlists… I’m a big fan of yours. Thank you for being irrevocably yourself and having great taste in: cars, music, pop culture references and a good attitude. Your sign that says “a little weird is ok” might be my favorite sign in your shop.

@LearningJeff 6 дней назад

I would definitely have those buckets fully recoated. Like you said, they’re stamped. The 16 psi gun did a beautiful job on the parts. It’s back to super exciting, in anticipation of reassembly.

@jdub6797 6 дней назад

CAD. Love it cardboard added design. The continuous improvement people trained the Japanese consultants call this trystorming! You are doing trystorm beautifully.

@craigfiles7067 5 дней назад

Recondition the headlight buckets, take photos of the stamps, and have a sign store cut some stencils out of vinyl so you can re paint them back on a sponge brush works best

@niklaswejedal463 5 дней назад

Slush-puppie: my tiny dog sliding arround in his wintershoes at the end of March, when the snow starts to melt! No? Well, I'm gonna think that anyway... 😅 Great progess made - those front details came out great in black! I love your attention to detail, that you want things to look as they should and the lenghts you go to make sure they do. Recently I gave one of die-cast 1/18 scale model cars a major face-lift since I never was satisfied with how it looked from the factory. I spent days searching for good refference images on the real cars, to get it right - as it should look. Truned it from ugly beige-brown to elegant black, added a lot of small details - I am very pleased with the result! Thanks for the inspiration, for what you do and Stay Awesome!