A Great BIG Thank you to Neil from Yorkshire who was so determined to thank me despite not having Paypay he posted £10 directly to me. Also a big thanks to all the wonderful grateful people whom thank me through my , www.paypal.com/paypalme/Davidglad makes helping people worth while THANK YOU ALL
Hi, can you tell me what the battery cell is? I have a Paslode impulse 350/90 CT 2007 model, but I don't know what replacement battery to get. Cheers 👍
Great video mate. Quick question should I'm im350 prime on switch. Fan starts when you de press but not on switch.. May have a faulty switch as my 2nd fix will prime when trigger pulled and nail gun not depressed this would help me loads and loads mate thanks
Hi Efrain first thanks for watching, unfortunately as I'm not a repair centre I can only do repairs when my tools break or some one sends me one to repair, but I will keep it in mind
That was very helpful, my black roller insert at the gas clip has split along it's length, thus the steel pin is sticking. Can I super glue the two halves together (keeping the bore clear)
@@dmgladden Hi David, Under the gas inlet cover flap, is a steel spindle, within a black plastic sheath, that sheath has broken along its length into two elongated halves. Will it be ok, to super glue the sheath together and re-insert the spindle. Sorry Dave, I confuse myself sometimes, part of being 73.
Hello David, Great video, very helpful when stripping and cleaning my PaslodeIM350+ Gave it a really good thorough clean. Tried to use the gun today on site but still very intermittent when firing. So much so that I went back to hammer nails. I’d say one nail in every 5-10 depressions. Is there anything else I can try to solve the problem?? Many thanks
No mention of checking the wear on the combustion chamber cover where the spark switch lever rubs, had to replace 3 in recent weeks where the gun is intermittent.
Hi I'm wondering if you could help would a paslode impulse lm350/90 CT be good enough for loglap to a stud frame my partner is building a shed thanks for any help
Not having best o luck with mending gun myself Dave!!got it all working after renewing parts now the chamber seems to be hitting metal o rings when it pushes into gun they are new replacement ones any ideas!!!
@@davidelder3370 hi David I did a full strip down video on this gun that should help you fit that spring, i know it was not easy so I did make a point of covering this in some detail, please let me know if it helps