Тёмный

Passat B6 ignition key lock replacement 

Lavian Everything
Подписаться 1,2 тыс.
Просмотров 35 тыс.
50% 1

Key fob wasn’t going in , had to wiggle it to fit. After replacing everything works fine. If something you’re taking out doesn’t come easily then you probably missed a screw or a clip.

Опубликовано:

 

10 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@xDMG15x
@xDMG15x 2 года назад
Thank you for taking the time to make this video. It is going to save me hours of searching for screws and clips. You are a champion!
@andresparrow2971
@andresparrow2971 3 месяца назад
Thank you for the vid! It was a great help. Hopefully this is the cause for my car no longer starting.
@lavianeverything
@lavianeverything 2 месяца назад
You probably have electronic steering lock faulty if car not starting or starter. Do you get ignition when pushing key?
@robbiefox7827
@robbiefox7827 2 года назад
Awesome man, saved me a lot of time and money. Cheers 👍👍
@chrisjamess2241
@chrisjamess2241 Год назад
Thanks for the lesson saved me breaking anything lol
@RT-er9yl
@RT-er9yl 8 месяцев назад
Replacing the ignition key lock, is it not necessary to code the keys? Isn't that the box where the immobilizer is located?
@sweetybean1
@sweetybean1 Год назад
i bought a used ignition from the junk yard with no key, will my key fob work without any programming? Thanks
@paullorenz6457
@paullorenz6457 3 месяца назад
Very nice, thanks!
@unforseenlaboratories8277
@unforseenlaboratories8277 Год назад
Great video
@REYMediaa
@REYMediaa 7 месяцев назад
What part number has to match? I have one where all the top numbers match but the bottom small numbers are different. Does that matter? Please let me know. Thanks !
@heavensendt87
@heavensendt87 2 года назад
Great video, just what i needed :) One question though, is it "plug and play" to replace this? Or does it need any form of programming after replacement part is installed?
@lavianeverything
@lavianeverything 2 года назад
Nope, plug and play. Might have to clear the faults in the steering wheel module if any but that’s it.
@heavensendt87
@heavensendt87 2 года назад
@@lavianeverything Great, thank you for taking the time to reply :)
@ck3737
@ck3737 4 месяца назад
wow danke für das knackig kurze video fürs aus- und einbauen. schloss muss angelernt werden? thank you for this video, short and easy. do you have to learn the new one? or not? greetings from austria
@ur2288
@ur2288 7 месяцев назад
Hi there. Thanks for this video really useful. Will the keys still open and close the doors via the fob? Or will that need programming?
@lavianeverything
@lavianeverything 7 месяцев назад
Key fob will work as normal. In my case as mentioned, i was struggling to insert the key fob
@REYMediaa
@REYMediaa 8 месяцев назад
Does that red light light up when it's working ? I have. 2006 Passat no start no crank . There's no power going to it . The horn don't work , the lights don't work , now the radio don't work , there's no dashlights on but the door open and DRLs . I hear no clicks of anything . Could it be the ignition switch . Any help is greatly appreciated!
@lavianeverything
@lavianeverything 8 месяцев назад
Most likely the steering lock. Try simple things like fuses and relay, relay 100 in the engine bay fusebox can fail as well. Try cheapest fix first
@REYMediaa
@REYMediaa 8 месяцев назад
@@lavianeverything Hmm thx .. I'm going to try everything . That's why I was asking if when you put the key fob in is that little red light suppose to light up red? Could it be a faulty ignition switch? I was thinking possibly the steering lock .. but when I put the key fob into the ignition absolutely nothing happens . All that happens is a hear it chime a few times and then nothing . The radio use to turn on when I did that but now that's not even turning on . Thank you for your advice!
@REYMediaa
@REYMediaa 8 месяцев назад
​@@lavianeverything Oh and another thing the brake lights don't even work when I press them.
@djal3xus
@djal3xus Год назад
Hey man. Great video. If I get another number, do I need to program it or adapt it? I know for a fact that if it has the sume OEM number will be plug&play. Also, how do I get the key out? Mine is stuck in. I think the problem is that the release mechanism is broken.
@lavianeverything
@lavianeverything Год назад
Take the whole thing apart to remove key, I know that if you put wrong part number if the car is automatic the key won’t lock in ignition. Try another part number but don’t assemble all together, test. Won’t need coding on that part. Other modules do
@mirelraileanu2447
@mirelraileanu2447 Год назад
Can you glue the chip from key inside of that device and after to use any key to start the car ? 😅
@lavianeverything
@lavianeverything Год назад
Probably yes
@lavianeverything
@lavianeverything Год назад
Just remove the chip from the key you are using and any key you put there needs to have no chip …. Otherwise you will have immo issues. I wouldn’t do this for safety reasons. Anyone can steal it
@mirelraileanu2447
@mirelraileanu2447 Год назад
@lavianeverything Yes , I just find a video witch answord to my question and it will work, you can glue the chip on the left corner down at entrance of the key , is a lot of space there fot doing this and you have just to remove the front cover from the fob not the entire device .So I replay here also in case anyone is interested to to this as well. Thank you for your answer too 😊
@colinw1197
@colinw1197 Год назад
Hi. Do you need to disconnect the battery before you disconnect the ignition switch?
@lavianeverything
@lavianeverything Год назад
Ideally yes if you have no tools to clear faults also if doing it first time I recommend disconnecting the battery.
@colinw1197
@colinw1197 Год назад
Thanks for the quick reply. Great video. Got the switch out and opened it up. Micro switches seem free but I cleaned with contact cleaner. Only an intermittent problem where the fob is pushed to start but nothing happens.
@lavianeverything
@lavianeverything Год назад
@@colinw1197 I replaced mine as it was to worn.
@kaczuchasly5174
@kaczuchasly5174 2 года назад
Hi. 2 weeks ago my alarm starting going on when I had locked the car, so i have decided to not lock the car to not disturb my neighbours, after few days, my car do not want start (no ignition when I put the keyfob) I have read a lot of comments on fb forum, and all people said that is battery issue, so I have ordered new battery, problem was solved for the next 4 days... and back yesterday. I have fully charged the battery (12.4v)yesterday but today car do not want start( no ignition, nothing happen when I had put the keyfob etc.) I will be very grateful for any idea with help. That can be ignition switch?
@lavianeverything
@lavianeverything 2 года назад
Have you fitted anything recently? Like a new radio or something that can drain it?
@kaczuchasly5174
@kaczuchasly5174 2 года назад
@@lavianeverything nothing. I think that can be aswell ECU....
@lavianeverything
@lavianeverything 2 года назад
Look for battery drain test on RU-vid, you need to pull fuses out 1 by 1 and see where is the problem.
@xDMG15x
@xDMG15x Год назад
did you find out what your issue was? something is draining my battery, when i lock the car with the key fob the indicators dont flash once like before, it usually means a door or trunk is not closed when you try to lock (or the switch/door control unit is faulty), so the car doesnt shut off properly and drains the battery.
@kaczuchasly5174
@kaczuchasly5174 Год назад
@xDMG15x no mate... my car was im VW dealer he said there is problem with Body control module but... also problem is somewhere else, and until they will not install the BCM they not will be able to looking next problem.. They charge me £2000 and my car still not was fixed... I have sale my car for £2000, and I have bought different car.... I hope you will find resolution... because my car never start working again. Wish you luck fella.
@ziadademi539
@ziadademi539 2 года назад
If i change that nedded code key ?
@lavianeverything
@lavianeverything 2 года назад
No, that’s replaced in my case because key wasn’t going in properly. No coding needed. Just make sure battery is disconnected
Далее
VW Passat B6 Steering lock fault failure repair.
19:47
Просмотров 246 тыс.
Bike vs Super Bike Fast Challenge
00:30
Просмотров 22 млн
Decompress small game, have time to play it!
00:35
Просмотров 3,9 млн
Effectively Disable the VW Immobilizer 4 (IMMO4)
8:40
Просмотров 304 тыс.
Vw passat b6 starting problem electric
4:12
Просмотров 112 тыс.
Naprawa tylnej lampy LED VW Passat b6, 3c
19:29
Просмотров 346 тыс.
Retrofit install new steering wheel in passat B6 3C
9:21
Ремонт блока ELV VW Passat B6
4:28
Просмотров 23 тыс.