PC DMIS common datum step by step

Подписаться 2 тыс.

Просмотров 23 тыс.

50% 1

No music video here : • PC DMIS common datum s...
Link to my blog : xyzarchitect.b...
In this video I explain step by step how to make a program in PC-DMIS and generate a common datum from a plane and a cylinder. Please feel free to give feedback.
Disclaimer : I am not a PC-DMIS expert, I have above basic knowledge, but I do not work on a daily basis in this software. However I will learn as much as I can on the way, so stay with me and we will learn together :).
Music credits :
Last Summer by Ikson: / ikson
Music promoted by Audio Library • Last Summer - Ikson (N...

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@academicofficeadmin4602 2 года назад

BROTHER, YOU ARE THE BEST!!! You oooh really helped me!! THANK YOU VERY MUCH!

@VictorHernandez-nt3tw 9 месяцев назад

Great stuff! Explained well and you do a lot better than people that are raised knowing English. Thank you for explaining this in English and for all your effort@ ❤❤❤❤

@MANOJPATEL-hw6cy 2 года назад

You are really good. You have very good teaching power.

@xyzarchitect 2 года назад

Thank you! 🙏

@martincacer7033 3 года назад

A great explanation, thank you for share this video, and keep doing more.

@xyzarchitect 3 года назад

Thank you also for your appreciation!

@soynuevo.1048 2 года назад

insane release, thanks!

@ashalchettri7238 2 года назад

God, I'm glad I found your video that helped me

@kingtimer8212 2 года назад

Thank you for sharing this tutorial

@necronix8332 2 года назад

That was great. Thank you.

@mouhcinetammal5128 2 года назад

J'attends votre retour et merci

@xyzarchitect 2 года назад

Hello, I translated with google. What do you want to know? And, are you speaking English?

@brayanfortunato9963 2 года назад

GOD!!!My broo

@phongta4154 7 месяцев назад

Thank you very much I like you add claim on this part.

@ilyasskarouach9613 2 года назад

Thanks for the explanation, could you please get rid of the music as it's distracting. Thanks again

@tibornovak8287 Год назад

thank you Sir

@isuruharshamal 2 года назад

Worked, thx

@mouhcinetammal5128 2 года назад

Bonjour tu peux aider moi pour comprendre la programmation pcdms et merci

@孙小圣-d8u 2 года назад

多发布一些 PC-DMIS 的视频教程。

@wojciechpiekarz5923 3 года назад

Thx for the great video, could you explain Iterativa alignment too?

@xyzarchitect 3 года назад

Will do in the future for sure 😉

@tomekp1988 2 года назад

Nice, but acc. to ISO5459 you should to measure datums as a tangential elements.

@xyzarchitect 2 года назад

Agree, Calypso has an option that does this by default. But if you measure acc ISO 5459 you will not have repeatability

@phongta4154 7 месяцев назад

Thanks a lots I would like you make more video show us how to change black points to red points, please

@pmungliful 2 года назад

how to do alignment with 321 when three planes are not perpendicular to each other. For that datum target points defined 3 points for primary, 2 points for secondary and 1 point for tertiary. ? thank you

@xyzarchitect 2 года назад

321 alignment is actually alignment with features plane ( formed from 3 points), line ( formed from 2 points ) and a point, all of this elements has to take 6 degrees of freedom, 3 translations and 3 rotations from XYZ axis, keep this in mind when you do alignment, all drawings has to respect this rule, if they do not then they are with errors. Keep an eye on the control frame from the drawing, where the datums are, they tell you how you make the alignment.

@pmungliful 2 года назад

@@xyzarchitect okay Sir. Datum on drawing is specified with datum target points in the manner of 321 and the points for line is not in same plane. One is on stepped flat feature of part. And last point is on contour surface. Can through some light on this doubt? Thanks alot🙏

@xyzarchitect 2 года назад

Contact me on the XYZ Architect Facebook Page, maybe you can send me some more info so I can understand better the problem, and help if I can

@pmungliful 2 года назад

@@xyzarchitect thank you Sir

@pmungliful 2 года назад

Sir please share me your email id. If it is okay

@hoshyargautam9317 Год назад

Hello sir I have a confusion in measurement can you help me??

@xyzarchitect Год назад

Sure, contact me via my Facebook page. And if I can help you I will.

@hoshyargautam9317 Год назад

@@xyzarchitect Oh sorry sir but I am not using Facebook...what can b a other way if u can suggest

@xyzarchitect Год назад

xyz.architect.3d@gmail.com - contact me via e-mail.

@Abcd-zk5so 3 года назад

Could you please best fit alignment video share.

@xyzarchitect 3 года назад

I will make a video with Best fit alignment in the near future for you :)

@uguraydemir9921 2 года назад

Hocam merhaba size bir sorum olacak yardımcı olursanaız sevinirim, Teknik resimde 5 ayrı datum var A,B,C,D,E ben şimdi CMM de 3-2-1 yani aligment nasıl yapacağım? Datum A dan düzlem,B den çizgi,C den nokta veya çap mı yada bu 5 datum dan istediklerimi kullanabllirmiyim

@xyzarchitect 2 года назад

Hello, find in the drawing what datums constructs the main alignment. Search the tolerance frames, usualy it is ABC if it is in that order, but the frames or in the right below corner of the drawing you can find the info. If you have frames with only 1 or 2 datums inside, then ask the mechanical designer where is the main alignment.

@darkentey Год назад

You could just use common datum tool and create common datum out of two datums.

@xyzarchitect Год назад

Correct, you can do it both ways. I presented it this way, because you have more control and see step by step what the software is doing.

@jakeegley1473 Год назад

Thanks. Could do without the music

@sarathprabakar6557 2 года назад

Compared to zeiss its bit hard to do programming..

@xyzarchitect 2 года назад

Yes, it is, but I recommend learning on harder software when you first start your measurement carier, tou will hit some walls and find out stuff that on Calypso you have due to user frendly platform.