Thanks for puting out this video, I was not aware of the pico 4's had ethernet compatibility. After seeing your video I dug out a 5 port 1Ghz Lan switch, connected that to a USB C dock which I connected to my PC via USB C and finally a single USB C cable to the Pico 4 from the dock. I also use Virtual Desk Top software, this setup improved the image quality and stability of the Pico 4, big improvement compared to a wireless connection when using a 5Ghz Router.
Abseloutly right on that one! Wi-Fi 6 and Wi-Fi 5 both use the 5 GHz band. Wi-Fi 6E uses a less crowded 6 GHz band, but only the enterprise Pico 4 supports it, not the consumer version. Still the future proof option would be the 6e mesh system.
Thank you so much SAD, I will have to try some of this out. You are very good at explaining these methods. I truly need a good GPU, 4090, way out of my budget. I will continue to try. :) MSFS is my goal. :)
, if you are talking about the passthrough with seeing my monitor screen as seen at 10:55 you can change the environment in the virtual desktop app to passthrough. If you mean the general passthrough for the headset without seeing additional app windows within the view it can be adjusted in you pico headset settings themselves - double tap the right side of your headset just infront of the volume rockers to enable and disable.
This is the most most helpful video on the topic I've seen. Particularly love your technical clarity and the sound quality. Now subscribed - Thank you, BB. p.s Keep practicing your approaches : )
Thanks for the video. I have my Pico4 since 2022 and use it mainly for PCVR. I also have a Quest3. Now in the beginning there was no noticeable difference between PCVR on the Pico4 and the Quest3. But since Meta has made many updates, now I have to say that the Quest3 is much better. I don't say the Pico4 is bad. It's still an outstanding headset, but for some PCVR experiences I prefer the Quest3. I use on both Virtual Desktop. Some games with fast movement in PCVR using my Pico4 makes me nauseated. Whitewater VR for example. Though it looks great on the Pico4, due to the higher refresh rate (on the Quest 120) I don't get sick with the Quest3. It is unfortunate that Pico4 doesn't get many updates. Ok, the system is stable, but improvements are not made anymore. The only way I experience improvements is with Virtual Desktop. Nowadays I use the Pico for slower games and watching movies. There's one game however that I love to play with the Pico4: mutrix. It has great songs, various possibities: to play and also an extra folder for custom songs (Beatsaber custom songs). It works very well.
Currently at my parents house and Pico Connect is very grainy while VD is very clear, idk why. Maybe bc of old router and Pico Connect doesn't work well with it. Maybe I'll try again when I get back to my place.
@@AkiTsukita unfortunately I’m not to sure about pico connect since I haven’t used it once tbh. I just know that virtual desktop is much more optimised and can be a lot more customised and fine tuned for individual headsets.
All new to vr and just ordered a cable like the method 2. Dunno if I made a misstake tho 😅 Does method 2 increase the internet stability compared to wireless? (having some wifi troubles in virtual detoskop atm) And exactly what steps do I have to do every time? Is it from "usb teathering" and after or what?
Sorry for the late reply, so method two does not improve the internet connection and your WiFi has no effect on the connection when using usb c. Feel free to send me an email and I will help you out.
Noticeable not necessarily- at least not that I know of - virtual desktop is however more customisable since you can adjust which GPU you are running as well as which video codec you want and the bit rate etc. A bit like apple and android 😅. Depends on the amount you like to adjust to your preferences.
@ArtFlyer01 the one does not cancel out the other. You can use all 3 methods - would recommend WiFi if you get enough throughput and no lagging or anything alike.
@@pauls6043 with the Pico connect I’m not certain if there is a use for it. With virtual desktop it is used to create usb theadering which is like a virtual local network.
Some routers have an USB port (mostly for external hard drives to be shared on the newtwork), would connecting the Pico to that port serve the "Ethernet to usb-c" connection, or do you absolutely need an external ethernet to usb gadget to do so?
I haven’t played around with this yet at all so to be honest I’m not entirely sure. But my guess would be it’s not possible since it’s for local HDD Setups. If you don’t want to spend the extra money I would suggest WiFi along with both pc and pico being in the same room as the router to reduce latency and connection drops.
Though I intended to go for the ethernet to usb solution, yet I couldn't find all the gadgets that it needed. So I bought a WiFi6 router and told myself I will get those stuff later. I'm less than 3 feet away from the router while flying in VR and I did not notice any problems whatsoever while connected over wireless, so I never bought the stuff to connect otherwise
@@Gasmaskratto I agree on this one ! Even with games I sometimes don’t feel like the resolution is good enough and would prefer even better pixel density. Keep in mind we are still early into VR experiences like this so give it some time !
Thank you Bro!!! Clear like a fresh glass of water, directly from the spring. I think I made a decision: I would buy Pico 4 using the Ethernet connection. Then upgrading it with a battery strap or a neck battery for the wi-fi session. It's great, now is the cheapest on the market, you can stream PS5 remote play too...why not !?! Thank you again..🙏🕊
I have been using option 1 with a dedicated WIFI router for when I am using headset in same room as PC (RTX4080) but when I tried to use that method on racing sim-rig in another room in house, the WIFI signal was just too slow and unstable, so I did the option 3 setup which as you showed is much more stable (1200Mbps). There are a few other steps and hardware and software needed for a remote racing rig setup though which is extra steps on top of option 3 and more complicated - need extra USB hub for all the sim-rig components (wheels, pedals, butt-kickers, mouse/keyboard) to plug into in another room (can't reach PC any more!) and then extra special software (VirtualHere) which creates a remote USB link back to PC which must be installed on PC and in headset, and is a bit fiddly to understand and setup.
I have never tried Vr and I'm thinking about having one what do you recommend? I'm going use it for movies mostly and a little bit games the price of Pico 4 in my location about 375 dollars and the Quset 3 550$ So what do you recommend? Or there's a better option Sorry for the long massage and my English not that good so sorry about that too 😅.
may i ask when playing is there a noticeable graphics downgrade when looking through the pico 4 vs what the desktop displays? im just trying to figure out if its also the same problem cause i played on my friends quest 2, im trying to consider which one i should buy
@@dashintv I don't think there are currently any VR glasses that deliver the same image quality as a high-resolution UHD gaming monitor. But the Pico 4 is pretty close and technically it also has a higher resolution than Quest 2 and 3. Pico 4 = 2160 x 2160 pix, Quest 3 = 2064 x 2208 pix, Quest 2 = 1832 x 1920 pix. The reason why we don't see the image as sharply as on a UHD monitor is the very short distance to our eyes.
I have Pico 4 Steam VR Troubles, i have a problem as the screen flash and appear upside down when using the Pico 4, the scene is generated from unity through steam VR
any idea what would cause massive lag spiked while using the ethernet method? surley it should just be smooth as its a wired connection? would the ethernet adapter cause this do you think?
Hi @latexbeep, thanks for the reminder, I've seemed to have missed it in the description. It is now added and ill place it here as well. acesse.one/IzqbC
Not necessary but you would be future proofing it. Once the 5GHz on the WiFi 6 router is congested you will have somewhat degraded performance on that bandwidth. With WiFi 6e you could put most supporting 6 ghz devices on that network to reduce the congestion on the 5GHz. So if you want to save money then just get a good WiFi 6 router. If you don’t want to keep having to upgrade and just add on to the mesh and maybe move into a bigger house you just buy more of the ones in the link in the description.
@@SadBoySocialClub1 thanks for the responce, what would you say the difference between USB and ethernet connection when upping the bit rate? I find I don't like anything below 250mb at godlike
@@gramsci1094if you are talking about the max nitrate that you can set in virtual desktop I believe the limit is 150 and most people recommend leaving it at 120. Regarding the router speed and the Mbps anything below 800 usually causes loss in information.
@@SadBoySocialClub1 The limt is 150 on H264 and 400mb on h264+ and HEVC is 200, AV1 is 500mb iirc. I dont get how PCVR is usable to anyone at 120! the amount of compression in dark areas is so bad. I have played through lots of things completely fine using around 300mbs (including lots of intensive things like UEVR mods) I do find the wifi stability is very bad on Pico 4 and Q3 now with its most recent updates does not fluctuate like the Pico does.
Hi, thanks for the super helpful video. Im unsure about the APK part, the link in the description takes me to a URL shortener page and im not sure which file to download, is there anyway you can help? Thanks
I got the ethernet setup but when I run the Pico 4 on screen stat I have a much higher latency. If I change it back to wifi you can see the latency drops from almost 400 to below 100.
Looking at buying all the parts for option 3. I only play DCS and I sit less that a meter ftom my router. Will this improve my image or not at distance.
Yes this would improve your latency and should make for way les game stutters. I typically like to have my pc also connected to my router vs Ethernet as a gamer. In terms of image quality it also depends on the Graphics Card you have the heavy load of preceding is done by your pc not the pico.
I would always recommend Virtual Desktop and haven’t used pico connect so far I’ll check it out - should be exactly the same process though with all 3 methods.
@@ibtesamahmad2054 is there anything in particular you would want to know ? I mean you can simply download the app and download it as far as I know and login and that should do be it 😁.
@@SadBoySocialClub1Oh my bad... Actually i bought pico 4, 128gb version and i tried to find compatible Netflix app but i couldn't find...also there are no videos on this topic... If you have any specific link for app or for specific video please share... Or make a new video on this topic mention me as well
@@ibtesamahmad2054 Hi, so I managed to get some information and as you mentioned I wasn't able to find the Netflix app Natively and using it in the Browser worked for some streaming apps but not Netflix. I won't be doing a whole Video on this, but here is a quick rundown. 1. Download the APK Pure app - apkpure.com/de/ 2. Go into the APK Pure app and search and download Netflix and install it 3. Log In as per usual and watch anything on Netflix Limitations: 1. Netflix (No Theater mode, so only in your Pico Home and only with APK app) 2. Amazon Prime (works in Pico Browser but not when you want to watch it on full-screen and the APK app won't work either) 3. Disney+ (works with the APK App and in the Pico Browser with full functionality) Hope that helps. Let me know if you need assistance with anything else.
![PCVR on Pico 4: THE COMPLETE Guide (2024 Update) [All 3 Methods Explained]](/img/logo.svg){kind=logo}
