PE Gaspipe and Everything You Need to Install It

Подписаться 31 тыс.

Просмотров 488 тыс.

50% 1

Shop our products: pexuniverse.com
About PEX Universe:
PEX Universe (aka PEX-U) is a leading industrial equipment supplier offering high quality heating and plumbing solutions for real life professionals, homeowners + DIYers. The mission of the brand is to equip and empower consumers by providing the best products for heating and plumbing, delivering the most authentic customer service, and offering the most competitive prices available online. PEX Universe was established in 2004, and is based in Brooklyn, NY.
Connect with PEX Universe Online:
Visit PEX Universe WEBSITE: pexuniverse.com
Like PEX Universe on FACEBOOK: / pexuniverse
Follow PEX Universe on TWITTER: / pexuniverse
Follow PEX Universe on INSTAGRAM: / pexuniverse
Follow PEX Universe on PINTEREST: / pexuniverse
Shop related products below:
PE Pipe and Accessories: www.pexuniverse.com/undergrou...
Anodeless Service Risers: www.pexuniverse.com/anodeless...
Compression Fittings: www.pexuniverse.com/pe-gas-pi...
PE Pipe x Steel Pipe Transition Adapters: www.pexuniverse.com/pe-pipe-x...
Tracer Wire and Mag-Detectable Tape: www.pexuniverse.com/undergrou...
Topics covered:
- What is PE Yellow (Polyethylene gas pipe)
- Standard Dimension Ratio
- SDR 11
- How to use Risers w/ PE gas pipe
- PE yellow fittings
- Mechanical and Fusion fitting connections
- Con-Stab (Id Seal)
- Compression fittings
- Burial Tracer Wire
- Burial Tape
Polyethylene (PE) Gas Pipe offers a convenient, cost-effective and approved method of running outdoor underground gas lines from meters and propane tanks to indoor gas system and variety of outdoor gas-fired equipment, including hot tubs, grills, infrared gas heaters and many others. At present, it accounts for over 90% of all gas pipe installed in the US. With over 50 years in service, PE gas pipe has proven to be a reliable product for handling gas distribution, with excellent resistance to both varying soil conditions and the constituents in the gas itself.
Contact us:
sales@pexuniverse.com
800-818-3201

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 138

@LaurelAndElm 8 месяцев назад

I just got finished digging the trench for a pool heater. I didn’t know I needed all these parts. Thanks for the video/info. It was a big help.

@jackt6112 Год назад

Thank you! The reason I came here is to see if it used inside of a house and you answered that in the first sentence. I watched the city use the fusion method with their gas distribution. That requires some interesting, and good-size equipment but then they are working with larger pipes except where the branch to the houses. I learned they monitor leakage and they actually have quite a bit. When several areas within and area show too much leakage, they replace the entire neighborhood. In our case it was ~ 1 mile x 1/2 mile. We noticed that the grass in front of the corner house that was a yellow-green instead of green as a result of a fair amount of leakage of the main running in front of her house.

@Bobcat1950 2 года назад

Great video! Full of useful info, and you have shown the ease of installation. Everyone needs to look at the different connections and installation methods available. I only install on my own houses and chose the permasert 2.0. The lyco is probably the best bet and I would use for a professional or commercial install, but it requires additional tools that cost. I would misplace them before my next install. If needed I would use any of the products you have shown. You should always check with the local inspector, some of them have their own preferences.

@brianruane8505 7 месяцев назад

Excellent explanation - very clearly laid out and articulately spoken!!

@pberube 2 года назад

Great video. Short and sweet. Exactly what I needed to understand.

@chrismorse2096 Год назад

Very clearly explained… thanks!

@smartplumber5570 Год назад

A very, very informative video! Great job, sir!

@RB211TriStar 5 дней назад

Well done, very helpful!

@davepearce6870 Год назад

Great video! Thank you.

@dungeondark 4 года назад

Good Job! You did not say anything that was wrong information. Gas companies can often do the job cheaper than the general public can buy the parts though.

@Ratlins9 5 месяцев назад

Thanks, excellent video.

@benfranzoso4736 3 года назад

helpful video and smartly conveyed

@niradz 3 года назад

Great video thank you

@thehomeconstructiontoolcha857 3 года назад

excellent presentation.

@jorbace 2 года назад

Great info! Thx.

@jfarinacci0329 3 года назад

Good vid. Thank you.

@henryparrott2447 Год назад

Great job young man

@jesussolis7294 2 года назад

Thanks for showing this tip's

@topspeederalmond 3 года назад

Thank You

@danb.3397 3 года назад

EXCELLENT VID

@donwhitmire978 3 года назад

thank you

@desertcamel3573 3 года назад

great vid.

@commercialelectrician133 3 года назад

Great video is this what you us for LP gas

@pirategirladventures302 6 месяцев назад

Enjoyed the video! I am going to extend the propane line from my water heater to my propane tank. Previous owner had built an enclosure (attached to my house) which house three 100 lb tanks. I’m not comfortable with those tanks being basically attached to my house. No code out where I live. Anyhow, I plan to relocate the tanks 100’ away. I like the idea of the polypropylene versus copper lines. I had a suggestion to run the line from where my water heater is located, through a raised floor in my house, and then the remainder buried to the new tank location. Can you tell me if this sounds feasible, and are there fittings that connection the PE directly to the water heater? Thanks for the help!

@specyiald 2 года назад

Can you do a video on the same PE pipe but with a shut off valve at the beginning.

@Nitestalker65 10 месяцев назад

Have done this work for 36 years. We fuse all our pipe. Or use a met- fit type fitting

@johnnyfive8748 Год назад

Awesome video. Liked and subscribed!

@mbfree2003 Год назад

Can I come up in the middle of a slab with one of those risers add a shut-off the go to black pipe?

@punxnotdead3873 5 лет назад

Does this need to be bonded if my black iron is already bonded at water heater, csst is in attic

@timmckenney6981 2 года назад

I want to run a gas line under a concrete patio I am about to pour for a future natural gas fire pit. How deep should I bury it below the slab? I am in Montana. Also, can I just pour concrete around the risers or should I sleeve them or something?

@jimsimpson4385 2 года назад

WHER DOES THE POWER COME FROM THAT TRACES THE GAS LINE? AND WHAT VOLTAGE? OR IS IT ONLY USED WITH TRACKING EQUIP. THANKS

@JackCondor44 4 года назад

if i daisy chain from my house to my garage do in need another vent and regulator

@vishalkhanna1476 Год назад

As Natural gas going down is it a good opportunity for countries to buy for future n store it..from commercial perspective? Just a thought..pl do your analysis

@2manycatsforadime 2 года назад

The fitting with the stiffener is home depot sold mostly. The stiffener doesn't fit all PE pipes, only the thick walled pipe which is the one sold by home depot. standard IPS wall thickness is not thick enough and the stiffener doesn't fit, it is too small and flops around. Because of this it is hard to get a tight seal and pass the gas pressure test.

@Philintx Год назад

I’m hooking propane from my house to my barn. If I connect propane behind the main regulator at the house, do I really need a second regulator at my barn?

@obijiakyanthony1294 3 месяца назад

Do you have a PDF of these lecture please

@flamehotnspicey 2 года назад

What gas lines or best and safe steel copper ep PC what is the best

@gurmeetgill6752 4 года назад

Thanks for info. I was looking around Canadian stores for this but I don't see it available. Maybe I just need to search better or is this not approved for use in cold climates?

@chrislamarre6036 3 года назад

All Hvac suppliers have it

@noplacelikehome9116 Год назад

How do you know which diameter of pipeline to choose?

@sanlot17ken 8 месяцев назад

How long do these PE last? Will they ever leak and need replaced?

@joshcowart2446 5 лет назад

I wouldn’t say fusion is for larger utilities. We have an iron that goes from 1/2” to 2” and we use it regularly for gas lines.

@PROATV13rb 5 лет назад

Josh Cowart I’m doing it right now lol

@firstmanagement1 4 года назад

Wherecan i find a chamffer tool for poly pex pipe

@Dannyws6 2 года назад

I have a laundry room that is under a slab foundation. What type of pipe could I use to run a gas line to this laundry room? Would the PE pipe work but in some sort of conduit?

@snoopdogie187 2 года назад

You can't run PE under a house, and gas piping needs to enter the house above grade. Also you can't run metal pipe underground (at least shouldn't) This leaves you with entering above the slab, and running piping into the house, probably staying inside the walls to hide it, unless the laundry room is on an exterior wall. The one exception might be if you use copper pipe, but the cost!

@bryanrudd608 3 года назад

Do you need a protective sleeve when you install this underground or is it thick enough to not worry about a protective sleeve. Thanks

@aron6998 3 года назад

No protection needed unless under a driveway whether it’s gravel or other material

@ankurjohriddsmd 2 года назад

what size pe tubing do i need. i need to go from my main gas meter which goes into my house and want to make connection to 2 fire bowls and 1 fire pit. my distances are about 150 feet to first fire bowl, then i'm thinking I'll T off to second fire bowl (after 50 feet away) and then T off to the Fire pit (about another 50 feet away). Thanks.

@snoopdogie187 2 года назад

You need to know your gas pressure, lengths of all runs, and btu of each appliance. The code book has a chart you can use, and there are plenty of videos on here explaining all of this.

@tubalcain1 Год назад

I understand this type of tubing is for underground use however can I use this for inside of walls where it won't be exposed??

@larrypruitt3919 Год назад

What if there’s a fire? JS

@andy347 4 года назад

Great video - went to your website to buy some and you don't list it.

@PEXUniverse 4 года назад

Thank you for the comment, every product you see in the video can be found on our website in category heating>gas.

@JuanMolina-dc8il 7 месяцев назад

Are these pipes safe for basements? some people telling me is a fire hazard and that galvanized metal tubing is safer for gas anyone have a good answer for me?

@desertcamel3573 3 года назад

which is better to use for PE yellow pipe dr11pipe fusion or mechanical for residential?

@PEXUniverse 3 года назад

We'd recommend PE yellow pipe dr11pipe fusion

@Jimbo234GW 4 года назад

standard/herd risers are not recommended for coastal areas ... I have seen them rust out in less than 5 years. We only use flex risers.

@PROATV13rb 4 года назад

I have just been using a piece of Galvanized pipe to make the transition. They fit right into those fittings and tighten down just fine. Saves me quite a bit of money versus buying risers that are 90 bucks at Home Depot

@boby115 4 года назад

Just an FYI, you have just taken on a lot of liability. Galvanized pipe is not allowed in the ground per the National Fuel Gas Code. States and municipalities can enhance National codes ,but no way are they allowed to reduce or limit the national code. I have worked in the gas industry for over 35 years an have submitted depositions when incidents occur; believe me this is something you do not want to continue to do.

@wheelinndealin 3 года назад

@@boby115 yup, leave it to a licensed professional. This is a skilled profession not a hobby. These accidents are not something you want to experience.

@cleansebob1 3 года назад

This is a great example of why codes exist -- to protect the public against DIYers who don't have a clue what they're doing. Mistakes can be deadly.

@PROATV13rb 3 года назад

@@boby115 in AZ if you run hard pipe underground it has to be scotch coated and The fittings must be GALVANIZED and wrapped with 10mil. Tape.i only use it as a riser and I tape it very well

@PROATV13rb 3 года назад

@@wheelinndealin that would be me, I’ve been installing gas since 99 and I now run my own company. I’ve done side jobs ever since I was out on my own and never have I once had a call back for any type of gas line problem. I have never had an accident or anything even come close to one. I take pride in every single job that I do and wouldn’t do any work any way other then I would at my own house. Now I don’t know if you sir have personally used the home flex underground system or not , by your disapproval I’m willing to bet you haven’t because you would see what I’m talking about and the way the fittings seal to the pipe. Now I’m only talking about home flex, once you slide your pipe inside it the way it seals it is it has a seal that goes around the outside of your pipe when you take it down and smashes that seal to the outside of the pipe. So it doesn’t matter what kind of material you put in that fitting if it’s IPS size it has the same or diameter it’s going to seal it. I would much rather trust a piece of steel over a piece of plastic myself. The other style with the compression and the Stab fittings Are a whole Nother ball game.Those other types are good for small jobs they are quick but stab fittings are priced ridiculous. I had a 2 inch T A few months back and it was damn near $500 The PE fusion tee in 2” was only 10 dollars. I shelled out and bought a fusion iron and that’s all I use now. I still do not buy the risers tho. They are way over priced. I just use a fusion 90 and a transition piece Which is perfectly legal.

@boby115 5 лет назад

There is actually three types of fittings for the PE gas pipe ( compression, constab and lyco fittings). Having worked for the gas utility in Saint Louis Missouri for 35 years I can tell you I have seen PE couplings come and go over the years. In my opinion you will find a no better fitting than the lyco coupling. The particular coupling you show in the video has something called a stiffeners one of the most important things to install with these type of couplings. Being that the stiffener is one of the most important parts, I'am not sure why this manufacturer would not have it permanently sealed inside the compression coupling like all the other a manufacturers of compression type couplings. I have seen a house blown up and leveled to the ground because someone forgot to install the stiffener. I was not aware of any manufacturer that still had separate stiffeners( just surprised they don't know better). If you goggle lyco fittings you will understand why I feel it is the best PE coupling in the business no one else comes close. PS, thank you for your videos, a very good source of information and education.

@davidb8596 4 года назад

Bob. Looking to run NG in the ground. Have 3/4 PE for the run, but need to transition from threaded black pipe to the PE. Used Swagelok years ago for a similar run but they are so darned expensive. Would the Lyall #341051050800 do the same thing?

@boby115 4 года назад

@@davidb8596 , just need 2 risers to transition you from polyethylene to threaded pipe and two couplings. At the gas meter you will probably need a shut off valve ,tee for pressure test & insulated Union for cathodic protection of the riser. Don't use this junk ,call Lyall or Continental (2 of the better brands,lyco fit being the better one but you will need a special tool). Don't forget to call the gas company about the added load and they may need to upgrade the gas meter (?) If so ask them to leave you a drop for your riser. There is usually no cost for this depending on your gas company.

@boby115 4 года назад

@@davidb8596 , PS don't forget the trace wire.

@davidb8596 4 года назад

@@boby115 This is a simple connection. Replacing back patio and planning for a NG firepit the will sit (not built in) on the patio. Around the corner from the patio, there is capped black pipe protruding from the brick exterior wall that the original owners (who had built) had included in their customizing the construction. My guess is they had it run should they want a hot tub. Nonetheless, the NG source is the house system. As a result, I am looking at a 12 foot run (not including depth to bury) and dont have to mess with the meter. My plan is to uncap, add valve, 90 down, nipple, 90 to horizontal, nipple, compression/transition coupling, PE for the run, another coupling, then black pipe out of the ground where the fire pit will sit so its concealed. My issue is finding an appropriate compression connect to transition from pipe to PE and reverse at the run end. I dont want these "shark bite" or plastic couplings. The other couplings I have found are ones that are part of a "system". Item details often say that their coupling only works with their fittings and PE so I want to avoid that. Just looking for an ole fashion transition coupling that will accommodate black pipe (threaded or compression) in and PE compression out.

@boby115 4 года назад

@@davidb8596 , you don't want to put black Iron in the ground. I would use a 5/8" L Soft copper , connect underground from a 5/8 to 3/4 polyethylene Continental coupling ( copper to plastic). Come within about eight feet of the fire pit and go back to Copper. So in the end it should look like black nipple coming out of your brick wall, elbow facing down, shut off valve, Tee for pressure tap, flare adapter, flare nut on copper, copper pigtail running into your Trench, copper to PE coupling, PE pipe installed in 18" deep Trench, convert back to copper about eight feet away from the pit & make all needed flare connections. If it's less than 50 feet I would run it in all 3/4" L soft copper & no connections would be below ground. Disclaimer, this is approved in my area. This should always be done by a licensed professional and you still want to contact the gas company about load and their requirement for this type of installation. The gas company should be there to help and consult you on the proper method of installation they require ( in most cases there is no charge for this). Also note : some states and municipalities do not allow copper in the ground. Uncoated black iron pipe is prohibited nationally from being installed in the ground. Do your due diligence and good luck.

@andygilbert8166 3 года назад

6:12 - the wire is still detectable, it's called a metal detector! AKA the same detection method as used for the tape Mr. Gas Man 💨

@watercarepro9610 2 года назад

At 35 to $45 a pop, how does he figure these fittings are cost-effective?

@Kevinw4040 10 месяцев назад

What gauge wire is required for tracing wire?

@erikbradley3050 6 месяцев назад

I believe 18

@garygray906 День назад

18 inches

@admin2717 5 лет назад

What kind of gas pipe material I should use If I'm running the the gas pipe line outside the house (from the gas meter to kitchen as my basement is finished) ?

@GG-tt3sg 3 года назад

Rigid galvanized pipe

@walterbrunswick 3 года назад

@@GG-tt3sg where do you live that galvanized pipe is allowed for gas by your jurisdiction?

@GG-tt3sg 3 года назад

California Los Angeles

@walterbrunswick 3 года назад

@@GG-tt3sg what about close nipples and street elbows?

@GG-tt3sg 3 года назад

Can't use no street fittings Close nipples yes. No left and right fittings is a no go

@cameronreason 5 лет назад

Lycofit is the best..never leak!

@RosebudBB 5 лет назад

How far underground does in need to be? For how long a distance?

@Hunter-ep7tn 4 года назад

Rose Brennen depth depends on local code. Where I am it’s 18” from top of pipe to final grade but it changes depending on where you’re at

@RosebudBB 4 года назад

@@Hunter-ep7tn I'm in Manchester Ky and I can't seem to find any information from anyone

@rosendomacias1303 Год назад

Black Iron Pipe is never used for underground gas lines... You are supposed to use Fletcher pipe for that purpose...

@paulcollins6863 3 года назад

Can you use PE gas lines in a crawl space?

@arthurr8670 3 года назад

No, only under ground. Above ground has to be metal, at least as far as I understand it.

@circuitdotlt 4 года назад

Wait. Are you saying you can DIY instead of paying a company to do it? How is all the formal process done? Do you need to certify it after DIYing? Will anyone ever sign the paperwork if the job was carried out by someone else?

@heronimousbrapson863 4 года назад

I think this video must be for installation technicians in training, not do-it-yourselfers.

@circuitdotlt 4 года назад

@@heronimousbrapson863 it looks so easy that is hard to believe you need a certificate to do this...

@heronimousbrapson863 4 года назад

@@circuitdotlt It may be easy to do, but certification is probably required because flammable gas is involved.

@losttribe1993 4 года назад

@@circuitdotlt Alot of things in your home are easy to fix !

@circuitdotlt 4 года назад

@@losttribe1993 sadly, you need paperwork for some.

@OfficerSafetyIssues 3 года назад

Why can’t pe pipe be above ground underneath your house?

@PEXUniverse 3 года назад

This is because gas pipes are not meant to be kept inside a wall out of sight. Due to any leaks that take place can run a risk for accidental damage. More of a softy issue.

@OfficerSafetyIssues 3 года назад

@@PEXUniverse thanks

@krazyj1957 3 года назад

Will it work under a driveway?

@PEXUniverse 3 года назад

yes

@walterbrunswick 3 года назад

24" burial under driveway in my jurisdiction (Ontario Canada 🇨🇦)

@mab1552mb 4 года назад

May install this in my cross space?

@losttribe1993 4 года назад

Use corregated steal

@walterbrunswick 3 года назад

@@losttribe1993 corrugated stainless steel tubing (CSST)

@walterbrunswick 3 года назад

@@losttribe1993 don't steal, it's not nice

@losttribe1993 3 года назад

@@walterbrunswick Haha! Its my Irish accent ! I had to read a few times to get it!

@STEVEM730 3 года назад

How deep should you bury it?

@Chrominance87 5 лет назад

It's pipe? Does that mean it can be threaded?

@Hunter-ep7tn 4 года назад

Chrominance87 no. Only steel pipe can be threaded

@rogervaught3985 3 года назад

When I try to go to your website I get: Potential Security Risk Ahead

@RichardsMovies 11 месяцев назад

One word: Kaboom.

@maestrovso 2 года назад

These PE pipes are like tile business. They sell you the field tiles at reasonable prices to sucker you in. Then you get a huge sticker shock when you buy the inside and outside corner tiles and they really gouge you. The equivalent of these in PE pipes are the connecting fittings and the worst of all the risers. Be prepared to get reammed by the sharp reamer.

@snoopdogie187 2 года назад

I've noticed because I'm doing a system that is going to end up needing 5 risers, each coming off a 3 in line. Now I'm pricing if its cheaper to buy extra PE line to reduce the size underground, or reduce it above ground in steel.

@treeguyable Год назад

Yea, but, price copper, steel, and csst , and all the tools and fittings. This route is cheaper for me, when replacing 50' of copper line. Can't even find the copper/ brass ferrules I need, if I wanted to go back to copper. This should be a cinch.

@krazykraut0069 Год назад

this is a harry homemaker gas video..in alot of states anything up to the meter is gas company property..so dont know why you would be doing anything with your riser or pipe to the main..what about air testing the connections and riser?this video could get someone blown up...call professionals

@boby115 Год назад

Edward, this would be for fuel run installations past the gas meter, to things such as outbuildings ,pool heaters, generators,fire pits and the like. And yes this work should be done by a licensed professional plus the gas utility should be informed before starting, so all of the requirements are understood, and everyone stays on the same page.