Тёмный

Penetrating Oil Showdown Episode 2. Will Seafoam Deep Creep prevail? 

Project Farm
Подписаться 3,2 млн
Просмотров 19 млн
50% 1

This test demonstrates that not all penetrating oils are equal. In fact, the see-through plastic/rusty bolt test shows which ones actually penetrate and which ones don't. Which penetrating fluid is best? In this showdown, Brake Fluid, Seafoam Deep Creep, Fluid Film, BG In-Force, WD-40 Rust Specialist, CRC Knock'er Loose. Consider selecting the bell in the upper right hand corner to get notified of future videos. Deep Creep won the competition with CRC Knock-er Loose coming in a close 2nd.
Products Tested In This Video (in no particular order):
Seafoam Deep Creep: amzn.to/34nEApm
BG In Force: store.ngpracing.com/bg-produc...
Fluid Film: amzn.to/32kAvQl
CRC Knock'er Loose: amzn.to/2YrGLo1
WD-40 Rust Specialist: amzn.to/34jOSXE
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Хобби

Опубликовано:

 

10 июн 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32 тыс.   
@shadels_load
@shadels_load 3 года назад
I love how he replies to comments on a 3 year old video, now that's dedication.
@ProjectFarm
@ProjectFarm 3 года назад
Thanks!
@I_killed_that_beard_guy
@I_killed_that_beard_guy 3 года назад
He is friend of Chrisfix that's why
@A.C.71
@A.C.71 2 года назад
@@ProjectFarm Thumbs up and comment just for replying to the comment of how you comment on a 3 years old video..lol
@johncollins5552
@johncollins5552 2 года назад
We are going to test that😉
@paulmurphy2503
@paulmurphy2503 2 года назад
Its a bot that replys
@stingray4540
@stingray4540 3 года назад
Hell one hour isn’t realistic. I give them about 30 seconds before I start cranking on them.
@CaucAzN1024
@CaucAzN1024 3 года назад
I give it maybe 4-5 minutes.. sometimes. Lol.
@therealdojj
@therealdojj 3 года назад
It's about being prepared If I knownive got a job to do I spray the stuff in sometimes days in advance just to make sure 👍
@slevinkrauss6873
@slevinkrauss6873 3 года назад
@@therealdojj depends on situation but I totally agree. I'll blast everything under a vehicle before I tear down for resto the night before. But, if they are in a place where I can I purposely just snap them or cut anyways. But I agree, prep and thought are key when able. But I also agree with the other guys in time is everything. Most the time these oils are mainly for the exposed threads and having lube with the heat of friction from removal. I find this video entertaining but pointless as well. Besides everyone in the old world knows that brake fluid and apple cider vinegar are the ultimate for anything you have time to free up.
@therealdojj
@therealdojj 3 года назад
@@slevinkrauss6873 I can't agree with it being pointless, it's very informative and simply laid out The beauty of Project Farm is the simplicity of the testing that many other testers over complicate by giving too much technical information
@slevinkrauss6873
@slevinkrauss6873 3 года назад
@@therealdojj I didn't mean for it to sound rude and I misled. It was a entertaining video and as curious as most were... With experience we all kinda know the answer. But I'm the guy that spins the display gear system with Lucas in it at the parts store every time I'm there :)
@sweypheonix
@sweypheonix Год назад
Everyone else is so impressed with his dedication and scientific rigor and I am as well. But I'm so much more impressed that he said "nuts" and "penetration" 100 times and didn't snicker once! He's like a real adult!
@Friend_of_the_One-Eyed_Ladies
You need better friends.
@susmongusidkaltaccountbass4301
Sad the copied comment got more attention
@markh.6687
@markh.6687 Год назад
Uh....he said "nuts"....huh huh huh! -- Beavis from Bevis and Butt-Head
@sweypheonix
@sweypheonix Год назад
@@Friend_of_the_One-Eyed_Ladies Better implies that I have any to begin with
@sweypheonix
@sweypheonix Год назад
@fosterpainter 2 people aren't as cool as you
@elektro3000
@elektro3000 Год назад
I was always taught that PB Blaster and other penetrating oils work best if left to work for a LONG time, at least overnight if not 24 hours. Sure, sometimes I spray it on with less than 5 minutes to work, but my experience is that spraying the day before works MUCH better. No hard data to back it up, though. I'd love to see you give the PB Blaster, Liquid Wrench, and Seafoam Deep Creep a 24 hour test.
@ProjectFarm
@ProjectFarm Год назад
Thanks for the video idea.
@trellway
@trellway 7 месяцев назад
PB Blaster has been around forever I think since the 50's I was surprised to not see it here to be tested.
@ayodeledavidakinpelu7936
@ayodeledavidakinpelu7936 7 месяцев назад
Exactly!!! Add pb blaster to the lineup
@timwelsh3630
@timwelsh3630 5 месяцев назад
@@ayodeledavidakinpelu7936he tested PB blaster in the video before this it was actually one of the worst performing ones
@harveywallbanger3123
@harveywallbanger3123 5 месяцев назад
Not all threads are seized for the same reason. Penetrating oil does not help if the threads are seized due to physical deformation due to heat or excessive force. This can sometimes happen on even a single thread without you realizing it, and no amount of soak will fix it. I still do a 24 hour soak anyway. If it won't break loose then, I go straight to the oxy-acetylene torch and get serious. Learned this lesson the hard way many times over.
@electronicsNmore
@electronicsNmore 6 лет назад
Some companies love you, and some aren't too happy with you, but your viewers love what you do. 😀
@ProjectFarm
@ProjectFarm 6 лет назад
You've got a GREAT channel. Thank you for taking time to comment on this video. I really try hard to provide a fair test and hope that companies and viewers are content with the testing methods. Thanks again!
@wobblysauce
@wobblysauce 6 лет назад
+
@SamDru
@SamDru 6 лет назад
electronicsNmore well said
@electronicsNmore
@electronicsNmore 6 лет назад
coviekiller5 The only problem with a video going viral is that you greatly increase the odds of lowlifes, trolls, and other degenerates posting comments on your video. I've been though it a few times, and still deal with it on a daily basis.
@aafjeyakubu5124
@aafjeyakubu5124 6 лет назад
This video right here is just one reason why I love this channel.
@gleb7247
@gleb7247 4 года назад
me at 3 am: time to go sleep also me: watches video about penetrating oil
@DeliriantPsychosis1442
@DeliriantPsychosis1442 4 года назад
Subbotnik 4:45 am currently
@SomeRightGuy
@SomeRightGuy 4 года назад
Try explaining to anyone why penetrating lube videos at 3 am is perfectly normal
@louisronan5903
@louisronan5903 4 года назад
Right here with ya.
@kennfn4077
@kennfn4077 4 года назад
Me right now
@Ashphinchtersayswhat
@Ashphinchtersayswhat 4 года назад
Need to get out more
@kliajesal4592
@kliajesal4592 7 месяцев назад
It's amazing to see how much the presentation of this channel has improved over the years.
@ProjectFarm
@ProjectFarm 7 месяцев назад
Thanks!
@Turco949
@Turco949 4 месяца назад
Only rational to expect it; success requires constant development/improvement. In the long term, 'Status Quo' is bad for business success.
@23Butanedione
@23Butanedione 4 месяца назад
I thought you said penetration
@blueridgetroutdad
@blueridgetroutdad Год назад
This is my favorite site. Some guys who are subject matter experts beat you up a little. No worries. They know a lot about that one subject. Most of them flaunt their knowledge in a courteous way educating others who want to go that deep. For the rest of us who on a broad talent and skill field want to do our best, jack of all trades - master of none, you hit the bulls eye. Thanks for giving us knowledge to the equipment 99% of us jacks want, need and use. Good job!😊
@ProjectFarm
@ProjectFarm Год назад
Thanks!
@Josmi
@Josmi 3 года назад
I really don't know why RU-vid showed this to me, but I am pretty happy. Great vid!
@ProjectFarm
@ProjectFarm 3 года назад
Glad you enjoyed it!
@OneDayIMay91Bil
@OneDayIMay91Bil 3 года назад
Hahah i have no reason to have got this as a prompt either , but glad I did great vid lets bump that algorithm and comment and like
@tanujkumar321
@tanujkumar321 3 года назад
+1
@rebeccaconlon9743
@rebeccaconlon9743 3 года назад
Same here
@2handsome2die
@2handsome2die 3 года назад
Same.
@tyler70878
@tyler70878 4 года назад
This guy always does every test the RIGHT way, and most controlled I've found compared to the rest of the RU-vidrs👌
@ProjectFarm
@ProjectFarm 4 года назад
I appreciate that!
@CHEVI789
@CHEVI789 3 года назад
I agree, love watching this guy's comparisons, he's saved me from buying crappy products, the companies that he shows are best SHOULD pay him a fee.
@vessmachineen193
@vessmachineen193 3 года назад
yes you are right
@bucracass1196
@bucracass1196 3 года назад
I agree he is pretty thorough on things he does
@jsteez7656
@jsteez7656 3 года назад
Project Farm probably cause he made it p
@marcomejia2197
@marcomejia2197 Год назад
I believe this video is the reason you channel blew up and made me watch all your videos ! Thank you !!
@ProjectFarm
@ProjectFarm Год назад
Thanks for sharing!
@armsrooterplumbingservices6718
I own a plumbing business with my dad. The most difficult part for me as a woman is loosening up corroded old screws. We come across them a lot. Thank you so much
@ProjectFarm
@ProjectFarm Год назад
Thanks for the feedback.
@BH-gh6qm
@BH-gh6qm 8 месяцев назад
i could help you unclog your pipes
@yayisnotasinger
@yayisnotasinger 7 месяцев назад
yikes bro.. @@BH-gh6qm
@jeffystevens
@jeffystevens 3 месяца назад
​@@BH-gh6qmlmao 😅
@wmcourte5161
@wmcourte5161 2 месяца назад
@@BH-gh6qm😹😹
@JerryRigEverything
@JerryRigEverything 5 лет назад
That electronic torque gizmo is sweet.
@ProjectFarm
@ProjectFarm 5 лет назад
Thank you!
@johns5591
@johns5591 5 лет назад
There are a lot of different types of those, some used to connect to a data logger for testing etc. Not terribly expensive either, but they need periodic calibration.
@RugalBernsteinOfficial
@RugalBernsteinOfficial 5 лет назад
Now i see why RU-vid recommended me this video
@RealNovgorod
@RealNovgorod 5 лет назад
That space pen is sweet!
@techsupportranjit7637
@techsupportranjit7637 5 лет назад
I dare you to durability test me
@jlo82585
@jlo82585 5 лет назад
"in the real world, no one waits three hours before doing the job" as a government employee I can tell you that you are wrong.
@ProjectFarm
@ProjectFarm 5 лет назад
lol. This is hilarious!
@mommytkl
@mommytkl 5 лет назад
Lmao
@ThickThock
@ThickThock 5 лет назад
lol truth
@dustinlittle2214
@dustinlittle2214 5 лет назад
I too can attest to that however on my own personal projects I will spray lubricant on the night prior and come back to it the next day. I'd rather be patient than have to drill out a stripped or broken bolt
@cashmoney7497
@cashmoney7497 5 лет назад
Jon long I wait 15 minutes.
@BAPcaptures
@BAPcaptures Год назад
keep on doing what you do. You are great. factual, informative, really enjoyable.
@ProjectFarm
@ProjectFarm Год назад
Thanks, will do!
@codyg7936
@codyg7936 Год назад
@@ProjectFarmHow about testing different 10k winches? I’m not sure if anyone has suggested this but I couldn’t find a video for it, thanks for all you do!
@AnonymousWaz
@AnonymousWaz 12 дней назад
Thanks for taking the time to do these videos.
@aregaminghd
@aregaminghd 5 лет назад
Don't ever stop what you're doing. You're 1 in a million. Most others in your position would've taken sponsorships from companies to talk up their products a long time ago.
@ProjectFarm
@ProjectFarm 5 лет назад
Thank you very much!
@chubsfatboy2738
@chubsfatboy2738 5 лет назад
He did by not trying PB Blaster that's the best there is and works in seconds
@remizu2901
@remizu2901 3 года назад
The fact that this guy takes the time to reply to his viewers comments makes me happy. Take my sub.
@ProjectFarm
@ProjectFarm 3 года назад
Thanks for watching and subscribing!
@shahied123
@shahied123 3 года назад
Same
@scotth.4840
@scotth.4840 3 года назад
The fact that he still replies to comments on videos that he uploaded over 2 years ago is what I like.
@Andrelaflay
@Andrelaflay 4 месяца назад
this whole channel is a literal God send
@excellenceinanimation960
@excellenceinanimation960 10 месяцев назад
You did a great job and I appriciate all the hard work you put into the testing!
@ProjectFarm
@ProjectFarm 10 месяцев назад
Thanks and you are welcome!
@ryancrisp6786
@ryancrisp6786 3 года назад
Let's all take a minute to appreciate the time it took to make this video, just in an attempt to save our knuckles from snapping off bolts.
@ProjectFarm
@ProjectFarm 3 года назад
Thank you very much!
@plageran
@plageran 3 года назад
3 hours waiting compared to a headache of drilling and retapping threads
@jeremyc4893
@jeremyc4893 2 года назад
@@plageran Patience is a virtue.
@plageran
@plageran 2 года назад
@@jeremyc4893 yup
@fisher1512
@fisher1512 2 года назад
always remember, every 2 hour job is one broken bolt away from becoming a 3 day ordeal.
@TheTechAdmin
@TheTechAdmin 2 года назад
I absolutely love that you have such a _strong_ understanding of scientific method. I don't like when some people pick and choose when to be precise during an experiment.
@ProjectFarm
@ProjectFarm 2 года назад
Thanks!
@Projectfusion
@Projectfusion Год назад
I use these videos to teach my students the scientific method.
@TheTechAdmin
@TheTechAdmin Год назад
@@Projectfusion That's great. For each test, you should ask: - Why is he doing *_this_* test? - How could you make this test better? (There won't always be an answer for this)
@trvman1
@trvman1 Год назад
My only suggestion is when you do these test, is how about putting the bolts sideways or horizontal rather then vertical when putting on these oils. I don't know about most people but the nut/bot's I usually have to get lose are sideways. So the oil won't penetrate as easily as what is shown in this video.
@doltBmB
@doltBmB 11 месяцев назад
there is no scientific method
@McNateDoggYT
@McNateDoggYT 6 месяцев назад
Dude honestly thankyou for the hard work I truly appreciate your admiration for educating and informing others it’s been a pleasure to watch!
@ProjectFarm
@ProjectFarm 6 месяцев назад
Thanks!
@NotMyRealNameBro
@NotMyRealNameBro Год назад
You are my go to video expert/scientist when it comes to settling arguments with my friends on superior products. Nobody performs tests on the same degree as you. Thanks for your work
@ProjectFarm
@ProjectFarm Год назад
You are welcome!
@lynth
@lynth 3 года назад
Me: Never do anything involving any kind of mechanic work. RU-vid: Hey, you wanna watch this 11 minute video of someone testing different kinds of rust dissolving fluids to better work with mechanical parts? Me: "Uh... sure, let's take a look!"
@ProjectFarm
@ProjectFarm 3 года назад
Thanks for watching!
@ridhosamudro2199
@ridhosamudro2199 3 года назад
Pretty sure now karma has marked you and "that one screw" is rusted shut by fate
@NotionSeller
@NotionSeller 3 года назад
literally me
@MalaysianTropikfusion
@MalaysianTropikfusion 3 года назад
@lynth Yeah, I'm like you, too. I guess the technicality was what drew me to watch it. I don't even do any DIY.
@machieltipo
@machieltipo 2 года назад
As good of a video as this is, its amazing to me that your videos have gotten significantly better since 2018. Just speaks to the standard that you've established for what a great product testing video looks like.
@ProjectFarm
@ProjectFarm 2 года назад
Thank you very much!
@Mr.Avuncular
@Mr.Avuncular Год назад
@@ProjectFarm hey I've found something if you can find it in your area in which you live i stumbled upon a dye used by a titanium casting company here in Oregon that just so happened was my neighbor who lived next to me worked at the place he said he had some stuff and it had the color of a yellowish antifreeze but the consistency of WD 40 I'm telling ya this stuff is the bomb it will creep, unstick,loosen remove undo just about anything if there was a space in the part when it was new this stuff would get into it and break it free.A gallon of this stuff lasted me 8 years totally awesome liquid penetrant but was florescent under black light and worked 110% everytime 👍👍
@Deontjie
@Deontjie Год назад
He should have tested Q20 as well. The original.
@benisplayin
@benisplayin Год назад
The test is very well designed. There are many variations and conditions to factor in allowing an accurate decision to be made. Just by having more than one bolt tested for each product under the same procedure eliminates many test variables. Nice work. I do so enjoy!
@kiiiburn
@kiiiburn 8 месяцев назад
The prices on these things have skyrocketed (like most other things). Thanks for the video, your methods are great and the condensed videos make for easy watching and learning.
@ProjectFarm
@ProjectFarm 8 месяцев назад
Thanks and you are welcome!
@bobbywshunter
@bobbywshunter 4 года назад
PB Blaster would be what I want to see, that's been my go to for years.
@ProjectFarm
@ProjectFarm 4 года назад
Thanks for the video idea.
@SnakesWrath
@SnakesWrath 4 года назад
Same here. PB Blaster should be compared to the ones that actually worked on this video
@Alkatross
@Alkatross 4 года назад
I know pb blaster works. But I wonder how it stacks up here. My guess is somewhere on the seafoam side.. Too bad the world will never know. I'm shocked at how similar they all are.
@jasonkubik1016
@jasonkubik1016 4 года назад
I chose Mopar penetrant over Pb!
@MrMarco7259
@MrMarco7259 4 года назад
PB Blaster for the win! If that dont work, break out the torch.
@hayabvsa
@hayabvsa 4 года назад
* Should be sleeping 3 hours ago. . . * "Oh nice a random video about penetrating oil! Let's see whats up with that first!"
@ProjectFarm
@ProjectFarm 4 года назад
Lol
@rahuldoes
@rahuldoes 4 года назад
Hayabusa隼 Sad reality of our vacuous lives.
@noddymilsom
@noddymilsom 4 года назад
Yeah, I’m supposed to be going on a 5k run.. ooh look oil
@Moicetto
@Moicetto 4 года назад
Same
@godfistleesin1971
@godfistleesin1971 4 года назад
i swear this is me everyday :D :D going down the youtube rabbit hole at 4 am is the highlights of my days
@pennellorob
@pennellorob 9 месяцев назад
A video actually worth my time that I watched in its entirety. Well done
@ProjectFarm
@ProjectFarm 9 месяцев назад
Thanks!
@westsolon7480
@westsolon7480 Год назад
Thank you for superb content, concise info, linear logic & all your effort❗️
@ProjectFarm
@ProjectFarm Год назад
You are welcome!
@dannymalone6400
@dannymalone6400 2 года назад
Having been a mechanic at a lawn care company, working around salt rusted equipment, fluid film is not a penetrating oil. It is a protective film for moving parts. I used it on the chains and motors of salt spreaders. PB blaster seems to work the best for penetrating oil tho. Great video man
@ProjectFarm
@ProjectFarm 2 года назад
Thanks so much! Thanks for sharing.
@donaldbarton6701
@donaldbarton6701 2 года назад
Agreed. PB blaster is my absolute favorite
@hillbilly4christ638
@hillbilly4christ638 2 года назад
Right blaster! Kroil or mmo are good choices.
@rockytop4
@rockytop4 2 года назад
@@hillbilly4christ638 kano nashville tn higher than a cat's back great stuff but yes pb is my winner for the $
@sgtrock1
@sgtrock1 2 года назад
Correct.
@SickPerversions
@SickPerversions 3 года назад
I dunno how i ended up watching this, but... here, take my like, sir.
@ProjectFarm
@ProjectFarm 3 года назад
Thanks!
@THE_Mirage
@THE_Mirage 3 года назад
Yeah same...
@BabaFragmentsAlter
@BabaFragmentsAlter 3 года назад
yeah same
@THEBULLETPROOFGARAGE
@THEBULLETPROOFGARAGE Год назад
Really love how methodical you were with this test! I learned a lot!!! Thanks!
@ProjectFarm
@ProjectFarm Год назад
You are welcome! Glad to hear!
@TheJackFlash
@TheJackFlash Год назад
This guy's channel is f*cking awesome. He asks the questions I have always been curious about. Thanks!
@ProjectFarm
@ProjectFarm Год назад
Thanks so much!
@bucknaked9095
@bucknaked9095 3 года назад
Years ago I learned that after spraying Liquid Wrench, I would tap several times on the seized piece. Theoretically, the tapping would set up vibration to allow the product to flow in better. Worked about 85% of time, thirty years ago.
@ProjectFarm
@ProjectFarm 3 года назад
Great tip!
@christianswakeup3004
@christianswakeup3004 3 года назад
60% of the time, it works all the time
@giovanniderose192
@giovanniderose192 3 года назад
Normally I would first complete this step when I kick it a few times out of anger.
@mousetoad7040
@mousetoad7040 3 года назад
even tapping without fluid can help break the rust loose, but with fluid is better of course
@MrE_
@MrE_ 3 года назад
@@christianswakeup3004 50% of the time it worked 60% of the time
@robinmurphy3085
@robinmurphy3085 2 года назад
I was a mechanic, I used a lot of penetrating oils ! At that time PBBlaster was the best but had / has very high VOC’s .. then I was working on a friends AC and ran into town to get Blaster, but the parts store didn’t even carry it. They had Free all penetrating oil and the salesman claimed it’s better than anything he has used! Reluctantly I bought a can and it’s now the only product I use! I literally drive an hour to buy it if I run out! It is that good, and has much lower VOC’s just an FYI! I always enjoy your channel and the smart ways you go about everything! Thanks!
@ProjectFarm
@ProjectFarm 2 года назад
Great feedback on the Free All! Thank you
@lifediversified8932
@lifediversified8932 2 года назад
it makes me VERY pleased to read that VOCs are a consideration and with all the eyes on this vid, the ripples should make a positive difference. well-done video. i've watched it more than once since its release.
@amirabelardo8203
@amirabelardo8203 2 года назад
I will give it a shot too for my diy .thank you .that is the one with blue writings on the label right?
@americanstriper8666
@americanstriper8666 2 года назад
What is VOC?
@lifediversified8932
@lifediversified8932 2 года назад
@@americanstriper8666 volatile organic compond
@Jourei_
@Jourei_ 10 месяцев назад
Damn, I really like the calmer style, slower and no yelling.
@hhyperdd
@hhyperdd Год назад
I have really come to enjoy your videos. Great and relevant topics. Good work.
@ProjectFarm
@ProjectFarm Год назад
Thanks and you are welcome!
@YesuAiNimen
@YesuAiNimen 5 лет назад
This guys videos are really cool. The best part is how is more than willing, even eager for legit criticism. That's the sign of a person who is genuinely striving to be better.
@ProjectFarm
@ProjectFarm 5 лет назад
Thank you very much! I like constructive criticism a lot. It has helped me improve the science that goes into testing products. My goal is to give each product a fair test and figure out which ones are the best. I've purchased too many poor quality products in my lifetime, wasting time and money. I want to find out for myself and others which ones are best. Thanks again!
@MP-bi9gd
@MP-bi9gd 5 лет назад
I totally agree!! Great video, very detailed & he listens and communicates w/his audience!! Im about to subscribe!
@MidnightPolaris800
@MidnightPolaris800 5 лет назад
vuduhwy completely agree. My favorite channel on youtube
@daniels5040
@daniels5040 4 года назад
Why am i watching this, i'm not even a mechanic
@ProjectFarm
@ProjectFarm 4 года назад
Thank you for the feedback!
@daniels5040
@daniels5040 4 года назад
​@@ProjectFarm No problem, but i appreciate your video, maybe it'll be useful for me in 3 or 4 years.
@daniels5040
@daniels5040 4 года назад
@el bojo loco well, he might think it is
@mhale1982
@mhale1982 4 года назад
Right? Me too. Super interesting though!
@premzyy1791
@premzyy1791 4 года назад
You are one now
@anselrod5699
@anselrod5699 Год назад
Excellent as usual, your videos are exemplary!
@ProjectFarm
@ProjectFarm Год назад
Thank you!
@DJVINNIE
@DJVINNIE Год назад
EXCELLENT AGAIN!! GREAT JOB AS ALWAYS THANKS!!
@ProjectFarm
@ProjectFarm Год назад
Thanks!
@TheJttv
@TheJttv 6 лет назад
Love the acrylic demo. Would not be surprised if that method gets used to advertise in the future.
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you!
@matel1s
@matel1s 6 лет назад
Acrylic looks nice, but i think it shows not how good it penetrates rust, but how good it desolves plastic.
@102819921
@102819921 6 лет назад
Odious Ktenology ok, kind of a misnomer here. Just don't mix pool tablets and organic solvents. Methanol, ethanol, gasoline, they will all do that... Boom.
@bobedwards8896
@bobedwards8896 6 лет назад
i agree, i think a way of showing how deep it gets through is simply drilling holes around the material being screwed into, at different places vertically
@Marco-fi6gv
@Marco-fi6gv 6 лет назад
You need to test PB blaster. It's the best stuff I've ever used.
@jfk64kennedy95
@jfk64kennedy95 3 года назад
dude, highly recommend gloves, just had 3 friends in late 50's, early 60's 1 auto mechanic and 2 furnace service techs, who never wore gloves die from a form of Leukemia that petroleum exposure a cause
@ProjectFarm
@ProjectFarm 3 года назад
Thanks for the recommendation.
@mrraz9820
@mrraz9820 3 года назад
We are gona test that
@Oblithian
@Oblithian 3 года назад
@@mrraz9820 yeah I hope not by getting leukemia
@lunchie80
@lunchie80 3 года назад
I just finished a long term employment with a major oil company in the refining sector. Can confirm a suspicious number of Cancer related deaths in fit and younger people with NO family history, SPECIFICALLY around the production of the 'solvent' end of the product spectrum. Specifically Naphtha and its derivatives. LHN or Light Hydrotreated Naphtha(a process unit feed stock cut around the C5 to C7 hydrocarbon range) is used in a LOT of automotive chemicals, specifically brake cleaners and such. LHN is very high in Benzene by weight and benzene is bad news.
@ministryofwrongthink6962
@ministryofwrongthink6962 3 года назад
@@mrraz9820 dude.. lmao
@hankschrader149
@hankschrader149 Год назад
17 MILLION views?!?! Congrats man well deserved!
@ProjectFarm
@ProjectFarm Год назад
Thanks!
@randomthingch1970
@randomthingch1970 Год назад
looking at this older video, i just freaking love how far you came from love from indonesia!
@ProjectFarm
@ProjectFarm Год назад
Thanks!
@HumbleMechanic
@HumbleMechanic 6 лет назад
Man this is a great video! I really appriacte your testing methods.
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you!
@DENicholsAutoBravado
@DENicholsAutoBravado 6 лет назад
HumbleMechanic heck yeah, man!
@josephhpenaa5214
@josephhpenaa5214 6 лет назад
HumbleMechanic Li
@endmesomebody1253
@endmesomebody1253 4 года назад
This man seems so wholesome i wanna meet him
@ProjectFarm
@ProjectFarm 4 года назад
Thank you very much!
@bilbobaggins4710
@bilbobaggins4710 4 года назад
Gay
@guybrooks3480
@guybrooks3480 4 года назад
@@bilbobaggins4710 are you admitting that here , or......?
@chethaynes5802
@chethaynes5802 4 года назад
You are correct. He once issued himself a warning ticket for traveling 5mph over the speed limit ! :-P ! :-P
@TheSecondR
@TheSecondR 4 года назад
reddit, get tf out of here
@user-ik5mn8qv5z
@user-ik5mn8qv5z 11 месяцев назад
Nice recommendation at 2:37 in the morning. It’s this kind of content I’m looking for when I’m trying to sleep.
@michaellinner7772
@michaellinner7772 8 месяцев назад
I have always had great results from all Seafoam products. I'm not too sure about brake fluid loosening nuts and bolts however, Dot 3 makes an excellent paint remover. Good job as always Todd.
@ProjectFarm
@ProjectFarm 8 месяцев назад
Thank you!
@gbin21
@gbin21 6 лет назад
This is some quality content here.
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you!
@DENicholsAutoBravado
@DENicholsAutoBravado 6 лет назад
gbin21 And even as a man who loves women, that is a handsome profile picture.
@trickym5748
@trickym5748 6 лет назад
DE Nichols that’s abit gay
@DENicholsAutoBravado
@DENicholsAutoBravado 6 лет назад
Richard, that can easily be seen that way yes. Without a real name for the user name, the face is probably fake too. That was my other honest thought. I had gone with the kinder one. lol Hey, I'm all kinds of entertaining if I can be if I can attract someone to check out my content. :) Automotive technician here.
@trickym5748
@trickym5748 6 лет назад
DE Nichols you must be American and your far from entertaining
@shanemaurer6698
@shanemaurer6698 4 года назад
I've no idea about anything I just watched, yet I loved every second of it.
@ProjectFarm
@ProjectFarm 4 года назад
Thank you for the positive comment!
@HerpDerpson210
@HerpDerpson210 10 месяцев назад
i like your testing style this is definitely how you should test and compare products from different manufacturer
@ProjectFarm
@ProjectFarm 10 месяцев назад
Thank you!
@crazyliclay
@crazyliclay Год назад
Man it's crazy to see how your channel has evolved over these years! Glad to see you've continued your mission! Good work and God bless!
@ProjectFarm
@ProjectFarm Год назад
Thanks so much!
@averyalexander2303
@averyalexander2303 6 лет назад
I would love to see rust preventives tested. As I say, prevention is the best cure.
@ProjectFarm
@ProjectFarm 6 лет назад
Great recommendation--I'll do it!
@stormsilagy5744
@stormsilagy5744 6 лет назад
If you do this check out some of the gun lube/rust preventatives on the market. The one that consistently comes in first in tests I've seen is Hornady One Shot
@kreizmann2943
@kreizmann2943 6 лет назад
Project Farm sweet would be useful to know for the rust on my atv
@hoepsipoepsi
@hoepsipoepsi 6 лет назад
Stonechip for the bottom sand it smooth and then paint with normal coloured paint of the car + clear coat for the bottom of it Looks stock Totally prevents rust forever For the rest... Just keep all dry and if not possible... Make caps over it to make water gets off of that spot instead of being still water (for like battery/fuse trays with old Fords)
@TBPony
@TBPony 6 лет назад
yes please, i would also love to see a video that shows how actually "rust preventative" these products are as they claim.
@dragos-lucian
@dragos-lucian 3 года назад
Project Farm: We'll check the bolts in an hour. Me after waiting 2 minutes: I paid how much for this garbage?!
@LeK-
@LeK- 3 года назад
So I am not the only one! ✌
@dragos-lucian
@dragos-lucian 3 года назад
@@LeK- Definitely not. 😂
@MrE_
@MrE_ 3 года назад
Lol. That's why shorter tests make sense for these products. Not many people wait the full several hours that the companies recommend
@mistercrimesb
@mistercrimesb 3 года назад
Well I've had experiences with WD...and basically just spray it, leave couple mins, smash with a hammer few times(to kick the rust out). Spray again, wait a few mins. ;)
@dragos-lucian
@dragos-lucian 3 года назад
@@mistercrimesb I cannot wait a few minutes though. I start twisting and trying immediately after spraying. Sometimes it works, sometimes it doesn't. I only have patience when I go fishing. 'Melting' rust I cannot wait.
@merritts3515
@merritts3515 Год назад
I've been getting in the habit of spraying Down rusted bolts days before I plan on wrenching. Very helpful
@ProjectFarm
@ProjectFarm Год назад
Thanks for the feedback.
@ryanwalker1457
@ryanwalker1457 Год назад
Kroil penetrate oil is an rust penetrate oil that I would like to have seen in your test. I use it at work and has done a good job for me. Love to see how it stacks against the rest.
@Kehbster
@Kehbster Год назад
It finished last place in the first episode.
@RichardPubesJr.
@RichardPubesJr. 11 месяцев назад
If you read this in an old timey gangster/gagster voice, its pretty good.
@jennajone45
@jennajone45 10 месяцев назад
My job uses Kroil too
@Rotary12
@Rotary12 10 месяцев назад
I like kroil and seems to work better than others.
@jimmy4x4socal44
@jimmy4x4socal44 6 лет назад
Hardest working guy on RU-vid! Thank you for your dedication! Thumbs up 👍🏻
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you!
@Magnabee97
@Magnabee97 2 года назад
I always used Liquid Wrench, but after seeing how well the Seafoam worked I’ll be switching to that. Another great video with very useful info. Thanks
@ProjectFarm
@ProjectFarm 2 года назад
Thanks for th feedback.
@keningilbert
@keningilbert Год назад
Great video as always! IMO it’s rare for anyone to wait more than a few minutes.
@ProjectFarm
@ProjectFarm Год назад
Thanks! Thanks for the feedback.
@johnrtrucker
@johnrtrucker 4 месяца назад
I always love coming back to older videos! Nostalgia! Lol one thing that makes or breaks a fluid in my book is how well it creeps up the threads from below. Maybe a possible future video?? 😂
@GlockBlocked19
@GlockBlocked19 3 года назад
Can't wait to school my father on this...no more holding the flashlight for me!
@ProjectFarm
@ProjectFarm 3 года назад
lol Thanks for watching.
@davidd3377
@davidd3377 3 года назад
That was beautiful! I am waiting for my grandson to get old enough to make me hold that light.
@stasja2970
@stasja2970 3 года назад
@@mostafagaaboba2702 "Aziz, light!"?
@jayrob7418
@jayrob7418 3 года назад
Lol
@MorrisonScotch
@MorrisonScotch 3 года назад
Haha
@matthewkringle2599
@matthewkringle2599 3 года назад
I’ve been recommended this video for 2 years now and I have finally obeyed RU-vid. They knew I would eventually click it
@ProjectFarm
@ProjectFarm 3 года назад
Thanks for sharing.
@chaplainmattsanders4884
@chaplainmattsanders4884 3 года назад
😂 me too!
@Engineer9736
@Engineer9736 2 года назад
Lol
@Squid-MAS4167
@Squid-MAS4167 Год назад
Your videos are so good keep it up!
@KWH803
@KWH803 Год назад
Great Job!!! Keep up the good work.
@ProjectFarm
@ProjectFarm Год назад
Thanks, will do!
@willstewich
@willstewich 3 года назад
One minute into this video and I’ve come to the realization that genuinely the world goes around because people like you put stuff like this on RU-vid I’m serious I really think what you do is so important thank you
@ProjectFarm
@ProjectFarm 3 года назад
You are welcome!
@tenncutt
@tenncutt 3 года назад
Pretty sure the world went around before youtube!
@wascawywabbit0987
@wascawywabbit0987 3 года назад
@@tenncutt Nope. It was flat.
@tenncutt
@tenncutt 3 года назад
@@wascawywabbit0987 oh yeah i forgot. Wait I thought it still was...
@wascawywabbit0987
@wascawywabbit0987 3 года назад
@@tenncutt :)
@suamesmacdaih3134
@suamesmacdaih3134 3 года назад
I loved this video as an auto technician deep creep is my go to. Usually I wait 30 minutes after with very little applied! It’s never failed me.
@ProjectFarm
@ProjectFarm 3 года назад
That is awesome!
@bobpaulino4714
@bobpaulino4714 2 года назад
Try Kano's Aero-Kroil sometime. I like seafoam but have switched to Aero-Kroil for the tough jobs.
@rickevans3959
@rickevans3959 2 года назад
Use the Heat wrench
@raycox1971
@raycox1971 2 года назад
I'm ordering 2 cans now!!
@marcosflores7095
@marcosflores7095 Год назад
Very informative. Thanks to you we have made wiser choices. Thanks
@ProjectFarm
@ProjectFarm Год назад
Thanks! Glad to hear!
@timdavanzati7510
@timdavanzati7510 28 дней назад
What a great and practical science experiment!
@ProjectFarm
@ProjectFarm 28 дней назад
Thanks!
@LukeCunningham
@LukeCunningham 2 года назад
I think the drip application method may have hindered the performance of some of the foaming oils, but I recognize just how hard it is to try to isolate all the variables.
@aaronschocke2147
@aaronschocke2147 Год назад
I use aluminum foil tape. It will cut through the tape eventually, but it can take long enough easily "bathe" bolts in awkward positions!!
@aaronschocke2147
@aaronschocke2147 Год назад
Use it to cup around the stubborn hardware
@zebedeesummers4413
@zebedeesummers4413 Год назад
yeah I know the amount used won't be as standard but the form is often there on purpose.
@DrifterZigzag
@DrifterZigzag Год назад
Heck ya i spray the f outta automotive stuff a bit rusty. I try not to risk breaking stuff
@tylergreen2113
@tylergreen2113 Год назад
I felt that way with the WD-40, I explained in my own comment but I sprayed each nut down good, waited 15-30 min sprayed them again and went in and they came right off
@johnmccallie2889
@johnmccallie2889 2 года назад
I've always sworn by PB-Blaster. I would love to see how it stacks up.
@pitterpatter3887
@pitterpatter3887 2 года назад
PB-Blaster is the best, 20 years in the trade it never failed me.
@ProjectFarm
@ProjectFarm 2 года назад
Thanks for the video idea.
@mabmf3824
@mabmf3824 2 года назад
@@ProjectFarm i also wanted to see PB blaster , been using it 25 years.
@truckinbobb
@truckinbobb 2 года назад
It was in the first group he tested.
@jeremyTallen1
@jeremyTallen1 2 года назад
Is there anything else?
@Ambivadox
@Ambivadox 10 месяцев назад
PB blaster every day for about a week prior and have yet to have a bolt/nut not come off easily. Love your videos.
@ProjectFarm
@ProjectFarm 10 месяцев назад
Thanks!
@z9944x
@z9944x Год назад
well done ! thanks for this video !
@navyretired230
@navyretired230 2 года назад
In the Navy we used wintergreen oil found in the medial lab to loosen slat corroded bolts. Environmentally friendly and easy to find. Also helps with sore muscles.
@faultyinterface
@faultyinterface 2 года назад
Felt like we used Wintergreen or Meangreen for just about everything.
@johndough6813
@johndough6813 2 года назад
Probably could even put it on toast.
@lennyb7301
@lennyb7301 2 года назад
Yes, wintergreen was a "secret" rust buster my Master Chief turned me onto.
@totallynotdelinquent5933
@totallynotdelinquent5933 2 года назад
wintergreen turns into the active ingredient in aspirin in your body, which is why it helps with sore muscles. It's also why you should be very careful with the ingestion of it, and why it should be kept away from kids
@dentoncrimescene
@dentoncrimescene 2 года назад
Sailors use it as penetrating oil?!
@shoyo3616
@shoyo3616 4 года назад
Me: I should be celebrating New year with my family RU-vid: wanna see which oil is better? Me: *YES*
@ProjectFarm
@ProjectFarm 4 года назад
lol! Happy New Year!
@shoyo3616
@shoyo3616 4 года назад
@@ProjectFarm happy new year aswell!
@clarkgwozdecki6782
@clarkgwozdecki6782 4 года назад
Funniest RU-vid comment I have read in a long time lol
@Steve-ow5fm
@Steve-ow5fm Год назад
Keep Doing What your Doing Your VIDEOS Are GREAT
@ProjectFarm
@ProjectFarm Год назад
Thanks, will do!
@superspecialty5169
@superspecialty5169 Год назад
I’m interested in seeing your test results, but first let me tell that there’s one that is absolutely the best! It was given to me from these shipyard workers from the mainland as they were on TAD. It worked on submarine components that were so rusted that we had to put it to the torch to free it up. When we applied it, letting it soak for 24 hrs it did the job!
@ProjectFarm
@ProjectFarm Год назад
Thanks for the feedback.
@andrewp.6844
@andrewp.6844 2 года назад
I'd like to see the same test performed on a upward-facing bolt where you can't get to the threaded side
@ianmackenzie686
@ianmackenzie686 2 года назад
Oh yeah. The real world examples. Top bolts of shock absorbers would a great real work test.
@paulcopeland9035
@paulcopeland9035 2 года назад
Why? The stuff doesn't work in the best of conditions, why make it harder on the "poor things"!?
@WingMaster562
@WingMaster562 2 года назад
@@paulcopeland9035 for science, shits and giggles. I mean, some of those even advertise that they work even upside down, whether that holds up to their claim and whether other products can do similar. Im curious too Also video did ask for recommendations for ideas
@fukkitful
@fukkitful 2 года назад
Capillary action
@j.m.5744
@j.m.5744 2 года назад
That is pointless. When you're conducting tests to determine if a product simply works as intended, any scientist would start with a basic test. If the product fails on a basic test, then you have your answer without creating multiple situations. When the product demonstrates an ability to work under simple conditions, this would then be the time to change the test.
@chinncannon
@chinncannon 2 года назад
I'm surprised to hear you say that 'nobody' waits three hours to let penetrating oil work in the real world! I was always told by my dad and other auto mechanics that if drilling out or extracting the bolt will be time consuming and expensive, then let the oil penetrate overnight and maybe even put some heat on it and spray more penetrating oil. It's often not feasable drilling out and re-tapping a bolt. Time and heat and oil are your friends.
@CP-tm7be
@CP-tm7be 2 года назад
Right! When I use penetrating oil, it goes on the day before I try to extract the bolt or whatever. Sometimes a couple applications over 2 days. But that's just home use. Mechanics are under more time constraints.
@ProjectFarm
@ProjectFarm 2 года назад
Great feedback. Thank you
@chronos2047
@chronos2047 2 года назад
maybe you and your dad but on the dealer shop and regular shop they don't wait too much, time means money.
@Cautela
@Cautela 2 года назад
Yep this is the correct way to use penetrating fluid on stubborn bolts/nuts; sometimes a few minutes to an hour will do the trick, but that's just luck. Spray, re-apply, and leave it alone overnight has always worked for me on all manner of vehicle exhaust fasteners.
@iHelpSolveIt
@iHelpSolveIt 2 года назад
That depends on your level of skill... And the size of bolt, for a 10mm bolt, centre punch three drill sizes and that done in less than 30mins
@swampboi1123
@swampboi1123 Год назад
Thanks a lot for everything that you do. Very informative.God Bless you.
@ProjectFarm
@ProjectFarm Год назад
You are very welcome!
@billmadle1235
@billmadle1235 Год назад
Such an amazing test very impressed
@ProjectFarm
@ProjectFarm Год назад
Thanks!
@mercman446
@mercman446 6 лет назад
I like the Seafoam vs. Liquid Wrench showdown idea! Another good video, BTW.
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you very much!
@viperkill3
@viperkill3 6 лет назад
Project Farm I'd also like to see this and to cover both test do a set of bolts like you did in this video and a second set like you did in the other and see if the results stay the same
@fringestream990
@fringestream990 6 лет назад
Sea foam just seems to be a great overall brand.
@mikewilliams9739
@mikewilliams9739 6 лет назад
Yes, this sounds like an interesting showdown. I'd love to see it too!
@cabinlife1886
@cabinlife1886 6 лет назад
I agree. Liquid wrench sells good here and I have a can of that. I want to know. Please test
@wayneschmidt490
@wayneschmidt490 6 лет назад
Outstanding! This is the type of experiment-substantiated video that makes RU-vid great.
@ProjectFarm
@ProjectFarm 6 лет назад
Thank you!
@CM-vy2ce
@CM-vy2ce Год назад
Knock er loose always works.. Sometimes I apply it 3 times daily for 3 days and the WORST rusted bolt will come loose
@ProjectFarm
@ProjectFarm Год назад
Thanks for the feedback.
@fullbeast3142
@fullbeast3142 Год назад
Finally a RU-vidr that does things right.
@davidhunsinger1587
@davidhunsinger1587 5 лет назад
*I can smell this video*
@ProjectFarm
@ProjectFarm 5 лет назад
lol
@red__guy
@red__guy 5 лет назад
The smell of menliness
@poolguy101
@poolguy101 5 лет назад
I feel like I'm in my garage now
@kevinwaycaster
@kevinwaycaster 5 лет назад
Most accurate comment on yt man!
@lorenfoster1037
@lorenfoster1037 5 лет назад
You can really smell it in real life
@justanobserver530
@justanobserver530 3 года назад
I do realize that you generally don't have hours to wait but when you do it really makes a difference on what works. I restore cars and I really don't mind when things that work the best take a while. I have used most everything, I think, and found Kroil oil seems to work the best. It sometimes takes much longer than most people are willing to wait but it's my go to.
@medicmule
@medicmule 2 года назад
When working on my own machines, I sometimes let things soak overnight as long as I don't need the machine immediately... Getting out a torch or broken bolts slow me down a lot more than just waiting.
@jerrygaber6150
@jerrygaber6150 2 года назад
I once rebuilt spring shackles on a 73 Nova spraying them with wd40 every day for 2 weeks. If you take time like that, go cheap. Works great!
@MrBadboy6061
@MrBadboy6061 2 года назад
If I have it, Kroil is the best, if not, I always use PB Blaster, everything else just takes too much time
@TitoRigatoni
@TitoRigatoni 2 года назад
@@medicmule yeah same here. I'm rarely doing just one job at a time, if I run into a stuck bolt I'll oil it and move on to a different job for a few hours.
@davidshettlesworth1442
@davidshettlesworth1442 Год назад
Thank you for this excellent video. Very informative and helped me pick the best penetrating oil for my many restoration projects. Carry On Sir!
@ProjectFarm
@ProjectFarm Год назад
Thanks and you are welcome!
@richardbinell2053
@richardbinell2053 Год назад
Thank you, Captain Badass.
@Quantum-
@Quantum- 2 года назад
I don't know about most people but I always prep my bolts the night before the job. I do my own work on my own vehicles. I'll soak them down night before, morning of and sometimes even a few minutes before actually doing the job. I get a lot of guys have little to no time to prep. But that time seems to make a good bit of difference for those that have the ability to utilize the time.
@ianmackenzie686
@ianmackenzie686 2 года назад
I'm with you. When not in a rush and having the luxury of time, I'll spray rusted bolts for several days and bang on with a chisel. This helped me remove three very rusted battery tray bolts with an air impact wrench.
@mrd4865
@mrd4865 2 года назад
@@ianmackenzie686 Same here. Unfortunately there are many times where something breaks and needs to be fixed now. In those cases heat, spray and impact.
@dokterzorro
@dokterzorro 2 года назад
Soak in the evening, wrestle in the morning. Ye Olde '40 works just fine if ya give it time.
@trevorm7013
@trevorm7013 2 года назад
I just get out the breaker bars and impact wrenches and just start busting nuts all over the place
@i.am.the.beasti.worship8030
@i.am.the.beasti.worship8030 2 года назад
@@trevorm7013 skeet skeet skeet
@mandc20022
@mandc20022 2 года назад
What I love the most about your videos is, you get straight to the point and dont try to fluff the length of the video, this is the quality content I appreciate.
@ProjectFarm
@ProjectFarm 2 года назад
Thank you!
@email6743
@email6743 Год назад
Jesus is the way, the truth and life, no man comes to the Father but by Him. To believe in Jesus Christ and His blood sacrifice for YOUR sins, you have passed from death to life, to believe not you are condemned already.
@amazingmachines3710
@amazingmachines3710 Год назад
Love your Channel, Very informative.
@ProjectFarm
@ProjectFarm Год назад
Thanks and you are welcome!
@christopherm.ferguson3124
@christopherm.ferguson3124 Год назад
Thank you. Helped me greatly.
@ProjectFarm
@ProjectFarm Год назад
Glad it helped!
@Mr.M1STER
@Mr.M1STER 6 лет назад
In the actual real world people apply penetrating fluid and give it 5 minutes before viciously attack the nut again with every tool they have in their arsenal.
@ProjectFarm
@ProjectFarm 6 лет назад
Great point!
@NobodyAskedForThis
@NobodyAskedForThis 6 лет назад
A combination of heat and wax is the quickest way to free up rusted fasteners.
@mrnsnp
@mrnsnp 6 лет назад
Yep, 10 minutes max, since you know, work must be done now. In which case, fire up the torch. Bet you it moves when its cherry red.
@trailrunnah8886
@trailrunnah8886 6 лет назад
True. Though if I know I'm going to be wrenching on something on the weekend, I may try to hit it a few times in the days before.
@assessor1276
@assessor1276 4 года назад
This is great work and highly valuable! Re: Fluid Film - I have always considered it a corrosion preventer and not really a penetrant. I was surprised at how well the brake fluid seemed to work though.
@d3tk914
@d3tk914 3 года назад
same for fluid film
@vplph
@vplph 2 месяца назад
Surprised how relaxed this video actually was compared to your nowadays' work(2024) . It has become .... speedy 😉👍
@mitubo
@mitubo Год назад
Useful video, thanks.
Далее
Which Penetrating Oil is Best? Let's find out!
10:39
Просмотров 3,6 млн
Qarindoshga uylansang😂😂
01:01
Просмотров 1 млн
ОБЗОР ТРЕЙЛЕРА STANDOFF 2 0.29.0 FUN&SUN
13:13
Best Penetrating Oil?  Seafoam vs Gibbs vs Liquid Wrench
11:33
Penetrating Oil HYPE! | Kroil, Seafoam, Liquid Wrench
29:50
Does Pre-FILLING The Oil FILTER Cause Engine DAMAGE?
14:03
Super gymnastics 😍🫣
0:15
Просмотров 92 млн