Perfect, Easy Finger Joints - Table Saw Jig (no dado) 

Really excellent tutorial. Thanks. I built mine based on this today. First time I’ve made one and I’m well chuffed with the results. Subscribed

🐼 Big Bear Hugs from a 67 yr old grandma in Kirby, Texas, USA 🐼

This is on my list of required shop jigs, I'm slowly making my way through the list.

Very clear and the grooving blade is the actual solution I was looking for after watching about twenty different videos.

That’s,the best finger joint jig so far. Nice and easy to make and use. Thanks very much for sharing the plans with everyone.

Finger joints are so pretty! This is awesome!

I enjoy watching your skills come to life. Thanks.🙂🙂🙂🌟

This came just at the right time seeing as I am attempting to make my own tomorrow. This will save myself a lot of time figuring it out 👍🏻

What a clear, practical video. Just what I wanted and I'm going to make my jig tomorrow morning! Many thanks RnB.

Brilliant video and clear plans. Thank you so much. I’ve just upgraded my table saw and I will try and make this jig this week. Thanks again👍

Great vid as usual 👍👍👍 Such a clear explanation and very generous to supply free plans! I’ve just ordered a 4mm kerf CMT blade and can’t wait to have a go!

Thanks Keith! I've looked at a looot of box joint jigs over the last few months and yours is probably the most digestable. And right in the nick of time as I have a cabinet project coming up

i really enjoy this style of video just a guy who seems like a good dude explaining how he made something

Having just bought my table saw, jigs are on my list.

Thanks for thismate . Straight to the point. No bullshit. What a relief.

Great video, great jig, free plans. What's not to like. Many thanks Keith.

Very good tutorial on making a Finger Joint Jig! Very clear and patient instructions.

Simple and effective. Thanks Keith!

Good looking jig, Keith. Thanks for the free plans.

Coincidentaly, I've just bought that exact blade, hoping that it will work for finger joints. Happy to see that it DOES work. Thanks for the neat jig plans, they'll make life much easier.

Great quality video Keith. Well explained and a great simple jig. 👍🏼👍🏼👍🏼

Absolutely brilliant, my friend! Thank you for sharing.

I bought the same blade a month or so ago and made a similar jig. I’ve made a few jewellery boxes with it, it’s a great way to do them 🙂

Such a nice fit! So satisfying to see a perfect joint with no voids - well done!

So pleased someone works in millimetres....been away from imperial measurements so long it's all foreign now. Thanks ;-)

Great video, I'm looking forward to making one of these - thanks for the plans!

Thats brilliant Keith, I have seen loads more complicated jigs that don't give the results your does, and has I have the blade already this jig is going to be one of my up and coming projects... Cheers Paul

I always enjoy your videos. Oooh, grooing blade, I didn't know they existed! Thanks! I really must make one of these, I made one for the router table before I had a table saw. I've put on my to-do list!

A great piece of equipment. Thanks so much.

Thank you very much for this information and the plans for the jig. Much appreciated.

Ingenius, thanks for teaching how to make this.

Very clean job. I love your tools.

Great job! Nice that you have free plans as well!

Started looking at your channel today. Appreciating what I’m seeing, will subscribe. Thanks for the jig plan.

Great video Keith, Thank's for plan's option, Stay Safe !!!.

Thanks, just what i need!!! That video was spot on!!

Not a wood worker but like to see you demonstrate your craft.

Thanks a lot! With your permission I have downloaded the project. From Barcelona

Great video Keith, I saw a Rob Cosman video where instead of wood glue he assembles the joint first and then applies a thin super glue. You don't have to worry about wood swelling or set up time, the super glue soaks right in.Because of the nature of the joint it's extremely strong. (No accelerant). I'v been using this method for a couple of months now and find it works really well. Love your videos, Keep up the good work.

Thanks for the plans. Will be making one soon.

Thanks for the video. I made my own and it works great.

Very simple and easy Well done

I've used a jig of this type for years. I put the tab on my side of the fence so I can see what is going on. Also I clamp both sides of a corner and cut both at the same time - saves some time and makes a better fit. If you cut the sides short and add a small strip of contrasting wood on each end, you get this beautiful ladder effect on the corners! Have fun!

Hi Keith. Just come across this video but been subscribed for some time. The content is excellent - you are so down to earth, practical and explain in great detail. You are a credit to RU-vid woodworking - thank you

Very nice Keith, all I need now is a table saw.

They look amazing

Nice finger joint jig Keith! Thanks for sharing the video with us!💖👌👍😎JP

Thanks for Free Plans, Charlie, CZ

Great video, thanks for sharing!

Excelente projeto...congratulation!

thank you,allways a pleasure jack.

Great Job!

Как всегда восхищаюсь! И лайк!

Nice one Rag!

Thank as always great video stay safe ☕☕👍😷

Spot on Keith👍

good job...love your videos

Yes i enjoyed it. Thanks👍👏👏👏

Looks like a good one. Thanks for the free plans.

That was a beautifully neat joint. I wish I had a full size table saw, I struggle on a hobbyist saw & box joints just about work but are a bit sloppy. Though I did CNC a good set (all 6 sides)

Brilliant. Thank you

gr8 video m8,nice jig.

Excellent - thank you.

Good jig,thank you video

I really need to make one of these

Having the two fences is very clever

Really helpful, cheers.

Thanks Keith.

Alway enjoy your videos Keith. They’ve helped me in my business a lot over the years. With the box jig, do you think it requires a guard at the back to prevent injuries? Secondly, I’m really tempted by those CMT grooving blades. Are you happy with them? Ben.

AMAZING!!

Good video thanks.

Thank you 🙌

The way you marked the triangles's tips to trim them down (:50-:55) reminds me of a remark made 30 years ago by a former student of James Krenov's. I made some marks similar to yours and told him to cut where I'd marked. He said, "Where? Here at the tarantula?"

Thanks Keith, I'm having these plans and I shall be getting one of those blades - Matt at Badger Workshop has also mentioned it and as a UK [no dado saw owner] I'm keen to get into finger joints and this is my chance. Cheers.

Thank you so much!

Love this! Anyone got any advise for a good table saw under £200?

Thank you for this video. This is very helpful. Do you know if this blade will work for Dewalt Table Saw DWE 7485? I’ve been reading that this saw does not take Dado blades but wondering if this blade would be okay to use on it.

- Box joints add a level of sophistication to any piece. They're really classy. Thanx 4 sharing. Who makes your blade cover, it's quite interesting & looks safe ???

Brill!

Very clever mate, Just wondered what table saw you have, Thanks

Thank you.

Hi. This is awesome. Well done. I have a Dewalt 7485 table saw that has 81/4 blade, is there a thick blade for this saw ? Please advise. Thaknks

Hey, I just watched your 2017 video where you were making table legs without a lathe. I just wanted to tell you about Bourbon Moth Woodworking Make Your Own Lathe video. I hope you do not mind, I just thought about that. I love your work!

I need to rack out my van with ply. Would one of those battery nailers be suitable?

And about that, how is your ”dustdrawer” for the mitresaw work? I remember your dramatic video when building...Planning to build if working ok. Thanks and keep them coming!

If you had made the jig less wide you could have put a stop block on the sled to make it easier to micro-adjust the finger fit.

Thanks for the plans. Where does one find your blade guard? How well does the dust extraction work with it?

Brilliant video and design since dados are not available in the U.K. link for the blade please

-Enjoyed it, that was wonderful Keith. I went and bought the flat tooth blade you have from Amazon. I've got this now but just noticed your table saw blade gap plate thing. Did you make this for using with this blade. I do apologies Keith, I'm really, really new to woodworking and love watching all you guys making it look easy. Thanks for this x

Thanks Keith. A very nice simple jig. Did you look at any other blades besides CMT? I am struggling to find flat topped blades. John

THANKS👍👌

A great vidio . Im having trouble finding the 6mm x 25.4 bore. Any ideas jim in uk .thanks chris.

(IMHO) Would be nice to see where you're going, when you start cutting, " this is the X piece", this the back piece etc? Neat idea though, thanks.

Nice.

In this video I make a simple jig for creating perfect finger joints or box joints via an easy to make table saw jig. Free plans available here: www.patreon.com/posts/46648425 6mm grooving blade: amzn.to/2N4MnSl (UK) please note, this fits my table saw which has a 30mm arbour bore - adapter rings and other blade sizes are available too This video is supported by Milwaukee, check out their full range here: uk.milwaukeetool.eu/?Social&RU-vid&Rag%20N%20Bone%20Brown%20-Milwaukee%20Range M18 Mitre Saw uk.milwaukeetool.eu/en-gb/m18-fuel-254-mm-mitre-saw/m18-fms254/?Social&RU-vid&Rag%20N%20Bone%20Brown%20-%20Mitre%20Saw M18 18ga Nailer uk.milwaukeetool.eu/en-gb/m18-fuel-18-gs-finish-nailer/m18-fn18gs/?Social&RU-vid&Rag%20N%20Bone%20Brown%20-%20Finish%20Nailer M18 Drill / Driver uk.milwaukeetool.eu/en-gb/m18-fuel-powerpack/m18-fpp2a2/?Social&RU-vid&Rag%20N%20Bone%20Brown%20-%20M18%20twin%20kit #woodworking #fingerjoints #joinery Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications HELP SUPPORT THE CHANNEL: Support with RU-vid channel membership: ru-vid.com/show-UCVyE_6jEtVZGmYGXtUOL5FQjoin Support with Patreon: www.patreon.com/ragnbonebrown Support with PayPal paypal.me/ragnbonebrown MY TOOLS: For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases: UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown US affiliate store: www.amazon.com/shop/ragnbonebrown SHOP: Etsy: www.etsy.com/uk/shop/KeithBrownMaker teespring.com/stores/rag-n-bone-brown-merch

Hey how about a video showing a complete box, I got to the last side of the box and somehow made it backwards and it would not fit right. how do you keep track of the sides and order you are working on.

3:10 the height of the blade does matter. You should be only cutting to the depth of the fingers of the joint in order to prevent tear out or otherwise you will be using a backer board all the time.

Would you recommend always using hardwood for the pin and runners or was that just what you had on hand? If yes, I'd love to understand why as I'm very new to woodworking. I bought my first table saw recently and would love to try something like this for practice but most of my scraps are plywood, pine or old firewood the previous occupants left in the back of the garden, so I've no idea what it is!

Nice video as always! A small tip: you can use the back edge of the saw table to glue the sledge square on the rails.

Great video! Now I just need to convert MM to inches! No problem though...