Simple Box Joint Jig for the Router Table 

The fumes from that gasoline powered drill press must be awful. I hope you're using proper ventilation! Have you considered electric? My nephew's friend's grandfather used an old hand-crank Bentweiler single stage which ran on half diesel half gasoline. He used that thing every day for decades and one day he just passed out in his shop while running his planer. His sleeve got stuck, it drew him in and planed off a good inch from his front side. Needless to say he did not make it. Anyway, thanks for the great jig video.

I love the lawn mower-powered drill press!

Great jig for the router table and I subscribed for 2 reasons: 1. Love the way you produce your videos. Quick, to the point, no unneeded talking. 2. For the sound effects. Those are spot on. Laughed each time you used a power tool. Well done!!

I’m going to program my table saw to play music everything I turn it on. I’m tired of the noise it makes.... Good video 👍🏽

Impressed with the build of the jug. Saved it as a bookmark for reference.

Gonna try this. Maybe I'll use a thinner board so I don't lose cutting length. Cool video btw, I like the sound effects when you use the powertools

I thought that a gas-powered drill press wasn't out of the realm of possibility, but I really wanted to know how a cricket-powered hand-held drill would work. Certainly more environmentally beneficial than the gas! You channel is a new discovery for me. I'll subscribe!

Wow, Briggs and Stratton 4 stroke drill press! Nice!

Really nice seeing people being safe in the shop!

Love the sound effects! Great video.

I already make the router table you posted here. Now I'm gonna make this!!! Thank you for the detailed video. it's really simple to watch and do the same. Gongrats. Greetings from Uruguay!!!

Using a gas powered lawn motor engine to power your drill press. Now that's re-purposing innovation. Impressive!

sehr sehr clever👍 das geräusch vom rasenmäher gefällt mir super😀 bitte wieder verwenden

lawn mower engine powered drill press - so fkn 'clever' !!!

I love the lawnmower drillpress

you are my new favorite, what with the appropriate sound effects.

Really cool jig! (and it seems like it converts the router's noise to birds chirping too :D )

I really liked that IC Engine operated drill machine 😃😃😄😄

Excellent build video. This looks like the one from Wood magazine. I built mine out of 18mm Baltic Birch for our router table. I use upcut spiral bits ans compression spiral bits, for 1/4", 3/8", ad 1/2"

this video made me smile many times. Good work!

Good job and your video was relaxing I was watching with a big smile !!

Love the Harley-ized drill press!

great, i liked the sound you add to every tool, eveyone should do that, wounderful jig

That is one of the nicer looking ones. I totally want to make one.

Brilliant Sound FX

I enjoyed the music choices and audio editing and also, nice jig. I'm going to make it.

Thank you for sharing this video Ollari! Excellent jig and one which I want to make for myself. Loved the sound effects and music too, Thank you from South Africa

Hast du super gemacht. da ich noch nicht in Besitz so einer Lehr bin, werde ich sie mir nachbauen. Übrigens, was mir besonders gefällt ist deine Rasenmäherbohrmaschine :-)))))

Thank you emvery much for this video. I am rather new to true woodworking and have set up a pretty good shop but need to build many jigs. This ine just made the list!!

this just convinced me to build one for my router table rather then my table saw, smaller and simpler to set up

It really impresses me the sound of your table saw motor. Instead of noise it plays music !! Where did you buy it?

This will be on my 'to do' list. Köszönöm!

Hahaha I'm enjoying your sound effects so much!

Thanks for the video like yours over the other ones. One thing I have to ask your drill press sounds like a gas two stroke boat motor

Worth the time to watch this video AND built the jig! Thankyou!

Great video. You must spend a ton of time on editing. That last transition of wiping your finger under your bench was clever for continuity sake. Thanks for sharing! : )

Nice video, very informative. Btw, the gas powered drill press killed me.

От фанеры только щепки летят и тут же прилетают обратно. Круто пилим!!!

great build man! as always! love your work!

Another excellent build sir!! Thank you for sharing!! Salute!

I would have liked measurements but, I decided to make it slightly larger anyway. I liked the way you made it for interchangeable faces dovetail or box joints. Yes very entertaining with sound fx, should do one with car exhaust sounds 😁👍 Thanks again.

Love that lawnmower mate. Bloody funny. Haha. Great vid

Perfect!!! Greeting from Indonesia... 👍👍👍👍

Love the sound design. Great job overall

Thanks for your video. Best regards from Mexico City.

Thanks from México. Saludos

I really like the way it works.

Dude the sound schem was priceless

I like your sound design 👍

makes me smile, everytime!

Cool vid and great project! I was a little distracted from the content with the sound effects though :P

Really like your videos, especially in that you don’t record the irritating noises from saws and drills - drives my wife nuts ! Anyway, I’ve had a go at building one of these and have learned several things; 1) It needs considerable accuracy to achieve good joints. Take it slowly and be precise ! 2) It is crucial to ensure the jig is aligned with the router bit at exactly the same place at each use. Any lateral movement will result in wider or narrower spacing of the slots resulting in a sloppy or non-existent fit. 3) The height of the peg determines the minimum thickness of your workpiece. If you try and cut shorter slots ( eg 9mm but have a 12mm peg) you cannot rest your workpiece squarely on the sled. It will simply rock in mid air and be quite dangerous. 4) This one perhaps might just be me, but . . . making the first cut especially ( where the workpiece simply butts up against the peg) is difficult. The router bit wants to apply its torque to the wood simultaneously trying to lift and turn it away from the peg. You need to hold it really firmly for an accurate cut and it feels quite scary. Advice would be to clamp the piece in position for this first cut. Once you are able to position the workpiece on the peg then things get easier. I am using a 3.25hp router (Triton) with a brand new 3/8” two flute straight bit (Titman) and it scares me. Have I set the router speed too slow or fast ? The router is on number 4 ( of 6) and the max bit speed is rated at 24000rpm. So, off for my third attempt at getting the front plate and peg right ! Given you will need a different one for each bit diameter, and possibly a couple for different peg heights, I can easily see the need to make several interchangeable plates . . .

Very clever, Seb ! Thank you !

Looking good, not sure I'd make one myself but the video was entertaining nonetheless

Nice! And I like your gas powered drill press. :-)

Thank you for saving us the noisy moments, and I'm sorry for your nail ... it's painful

Very nice! Simple and effective! 👍

Nice sounddesign!

Super sinnvoll, super stilvoll, super brauchbar, super geil.

Me gusta como suenan tus herramientas. Buen trabajo!

Thanks my friend!! I appreciate your job and idea.

At first I was like, what? But then I was like, ah, ok. Cool sound editing.

klasse arbeit, klasse video und super geräuschkulisse. einfach eine tolle idee.

Awesome sounds effects love the editing and how simple the jig is. Where is that lovely screwdriver from? Or did you make it? Very cool.

Great video!

Very handy jig 👍 that reminds me I need to cut the grass 😂

хорошее приспособление,скоро понадобится.СПАСИБО.

Thanks so much for this

Szép kidolgozás. Ügyes vagy.

Tried this today, must have messed up the spacing. Fingers too big. You make it look easy

How could you accurately make the little index pins without a table saw?

Thanks. That's a simple solution

How come your drill press sounds normal when other tools play music?

Boa noite!!! Simples, Claro e Objetivo, o Melhor que eu vi até agora!!!

@00:54 how did you not glue that to the table? I didn't see you back it off and I would assume the squeeze out would make it get stuck. I'm legit curious about that. Thanks for the music when it was necessary 👍

This build seems to depend on the thickness of the board at 3:45 exactly matching the width of the router bit. Is that correct? How can I be sure that they are identical?

Great video! What type of gasoline does that drill press run on, and how do you get the frogs to put so much torque in?? I loved this!!!

Is that one of those new 4-stroke drill presses?

A fűnyíró efekt valami zseniális, elösször azt hittem csapágyas az oszloposfúród 😁🤪

super idea with the different sounds muahahahah, funny. Nice Video !

Bellissimo lavoro, complimenti!

I like the background sounds...

Instant subscription!

I made this jig following your video. Do you place a sacrificial board in front of the workpiece to avoid tear out on the workpiece. Thanks for the video.

Cool jig made it but my router bit is two short need longer bit to reach material. What can I use? Thanks have a great day. Doug

You delivered, I liked and subscribed :)

Really good idea accompanied with some great sound choices!

Amazing channel and videos too, subscribed!!

Very nice. This one will be a "watch later" to build one of my own. Love the dedicated tool sounds. Now I'm curious to see what some of your other tools will sound like. ;-)

Gracias por enseñar tu excelente trabajo.

Nice video! Your drill press needs the carb rebuilt :)

Excellent video! What was the product that you applied to the sliding sled for the jig to make it more slippery and help it slide smoothly? It was in a glass jar. Also I am curious what you added to give a tiny bit of clearance for the slider rails. Looks like strips of paper or veneer.

I need one !!!!

How do you get your router bit to stick up so far above the table? I had to cheat how far it went in the collet to get it above the table, forget putting a slide on top of that, yet.

the sound effects on this video are ABSOLUTELY DELIGHTFUL

Buena plantilla, es fantástica amigo. Saludos.

Good idea for a finger joint jig, and a good video of how you made it. I've started one and will finish tomorrow when the glue's dry. At 3:43 can you confirm you are setting your table saw to the size of the router bit you use, but where did that piece of plywood come from? Plywood is usually pretty random in size. Just wondering. Thanks.

Cool jig👌👌

excellent ! faut que je fasse ça !

Love the sound effects!