I literally thought about ordering wheel spacers for my f32 today. Would go with 20mm rear and 10mm front. Amazing that your video just came up, appreciated!
Perfect timing! The 20mm will look good in the rear but I actually think you should go wider in the front. I did 15mm in the front of my F32. I actually have a video about it
Are the lug bolts m14x1.25? Have the exact same car and just want to make sure. M14 1.25 or 1.5 is my concern whether it’s too short for spacers or not.
I have a 2013 328i with stock 17s I lowered the car but i feel they need spacers to complete the look. Was thinking 12.5 front amd 15 rear. I shouldnt have any issues like rubbing or anything right?
I have a 2013 328i m sport, I just lowered mine, I tuck on all four sides and I have -2 camber in the front, thinking of adding spacers to make the fitment a little more flush but honestly I don’t think you’d rub if anything look at videos and see which fitment you like the most
Hey so if you get these, they’ll actually come with extended lug bolts. Use those. Never use the stock ones with wheels spacers because it won’t have enough length to hold the spacer and the wheel. You can also do a stud conversion if you want but with the ones I feature in the video, don’t have to
@@ayyyman_ just seen the video def looks amazing with the 20mm and 15mm in the front ... thanks for much.. def debating 18 rear or just going with the 20mm...
I have the same setup - I’m thinking of going 15 at the rear and 10 in the front. Don’t want any tyre poke as I prefer a more flush look. What have you decided on?
@@wildey_1061 I’ve been told that we cannot go 10 in rear due to hub size. So I’m thinking 12 in rear. It’s near flush already. I don’t want it to rub. 15 in front and 12 rear? My winters is 225 squared, so I’m going to measure and let you know exactly how much is required