Perfectly Adjust Your Andis T-Outliner Tension and Blades | How to: AD the Barber 

That "snap" is the key to it bro thanks...............trimmer sharper than brand new now

I been cutting 25 years ain't never knew this omg fire video bro

I had some Outliner IIs that I've had for over 25 years...they quit working so I took them apart and cleaned them up. Still wouldn't cut. I literally threw them in the trash and was ready to waste $90 on a new pair. I watched this video and you got me up and running again like they're brand new! Thanks man.

Been cutting for almost 50 years this July.. I have never thought about adjusting the tension bar, I took it for granted that the Factory setting were correct. Very good video.. Even Old dawgs can learn something new.

I was dead in the water with my trimmer. I took it apart to clean and it was never the same. I followed your video with the blade alignment and tensioner and now it works better than when I bought it! I appreciate your professionalism. Thank you.

Thanx a whole lot Fam it's 3 am in Houston TX. and I followed your instructions and got my joints right. I even adjusted my wahl t linners. I appreciate the free game RNS.

This is the best video out of all of them. Concise clear and clearly shows how to adjust blade and tension spring with correct position.

This is the absolutely best demonstration for adjusting the tension on the Andis Outliner trimmers

This is the best quality, most detailed T-outliner video I have found. 5 stars, thank you!

Setting that tension and removing that back screw has my liners hitting way better thanks.

I admire your professionalism, you saved me money from buying a zero gapper, thanks!

I wanna thank you champ! You save me from throwing away my favorite Andis clippers. I took my Andis apart to clean them and could put it back together. When to Sally's Beauty Store and was told they don't repair or sharpen blades any longer , what a blower 🤦 So I came home and started searching for instructional videos and came across yours... Thanks for your instructions on maintaining your clippers.

Yo bro , I’ve been trying to learn this technique for years. No one wants to show me . Even took my clippers to the repair shop to get them sharpened and they still weren’t hitting with that razor crisp line . Yo I looked at your video twice and tried your technique and my Andis T outliners work like “ butter “ . Yo thanks 100 fam

Finally bro after 20 yrs, your vid made me scream for effin joy, thanx alot for the vid!!!!

Yo! Besides the camera not focusing, I have ZERO idea why someone would give this video a thumbs down. This is great! You're a life saver! My skin is too sensitive for a razor, and my Andis weren't cutting properly. This video changed the game! Thanks.

I always go to your videos when I'm having issues with my clippers. Thank you so much! ❤️

Just did this to my t outliners and WOW! what a huge difference it makes, thank you bro!

Thank you! Every tutorial that I've come across in the last few years has not helped me at all. This was easy to follow and my blades are now zero gapped with the correct tension!

After trying to zero gap the clippers they would not cut at all i tried for 1hr to adjust them yesterday without sucess after watching your video about tension spring adjustment that worked like charm! Thank you !

Thanks brotha!!! Been cutting my hair for years. I never knew about both adjustments. Despite that, as a high school teacher my students always tell me how fresh my cuts look. But I came across your video and followed both steps to the T. And it's definitely a game changer. Now my andis outliners are sharp as hell with a lot more power. My shape up looks better than my last trip to the barber. Can't thank you enough!

Amazing tutorial. I was having trouble with my outliner not cutting properly and this definitely did the job. Cheers!

Thanks Very Very Much.! I WATCHED MILLIONS OF VIDEO'S. THIS 1 SHOWED ME HOW TO fix my Andis on the First time I watched this video. Thanks Again 🎉❤😂

BRO YOU JUST SAVED ME FROM BEING UGLY ANOTHER DAY, NOW MY TRIMMERS ON POINT, THANKS MAN

Concise, simple and well explained. Great video. Thank you!!!

appreciate you taking ur time out to show us how it's done ✊, great look

WOW! My T-outliners are hitting so sharp and they are as smooth as butter this is perfect for this coming weekend as I’m going to be doing a ton of back to school cuts. Thank you so much!

This is the best video ever that I have seen on adjusting outliners. Thanks for sharing your knowledge.

Thank you Sir, I followed your tip and now my blood pressure is normal.

Thanks for the tip. My main issue was with my tension and the number one thing that worked for me was removing the second screw by the power switch. Amazing!

Bro thank you so much man. I've been looking for a simple straight forward video. You covered everything man. Thank u.

So Awesome! Watched this last night and adjusted my Andis T-Outliner tonight. Had some trouble after replacing blades and had no idea why....now I do. It works as god if not better than fresh out of the box. Thanks so much for this. With some practice we can all get our Andis T-Outliners dialed-in and working as well as we would like! Have an "on the money" blade setter on the way, but the mirror technique worked well for sure. Thanks a TON:))

I haven't tried it yet, but I must say, this appears to be one of the best videos (if not the best) when it comes to adjusting the tensioner. Clear instructions, clear picture with no blur. Thanks.

great video man, I have the same t liners for the last 12 years never adjust then only thing I ever did was change the blade. learned something new today 👍👍

Awesome...clear, cut, and detailed instructions. I'm a fan. Subbed.

I have watched a half dozen videos and went through multiple guides. I was never able to get my trimmer to cut again. I followed your video and it cuts perfectly for the first time in years. Thanks!

My man, I cannot thank you enough...I tried 3 different blades in one day (all zero gapped), and thought that my T-Outliners were shot...after watching your video, in 2 minutes I was back to cutting my hair...thanks so much! Appreciate your informative and easy video...you seriously helped a ton!

bro, I truly appreciate all the knowledge u drop!

AD!!!! Man, you win hands down regarding adjusting Andis T-Outliner blades! I have watched several videos and yours is the most thorough as you incorporate adjusting the tension screw inside the clipper! I appreciate your instruction and am now a subscriber! Thanks a million!

No matter what came out over the past 35+ years I kept my t outliner. But as I got new blades I decided I had to find the right video! Sure glad I bumped into you! So much has improved for fading and cutting! Over the years. Glad I found you! I’ll subscribe and look for recommendations. Thank You 😊

just got my first set of t liners. about to put this video to use as soon as i get home, seeing the comments i thought out the box my beard was crispy, cant wait to use this

Hands down a perfect tutorial. 10/10

Never knew u could adjust the tension as well, this explains a lot.. Good lookin out

After searching for a while I can say this is the BEST video out there for the outlines! Thanks!

Thank you so much! I've had these liners for 2 years and now they work! Completed quarantined hair cuts coming soon.

Great video man! I travel for my job so I invested in these to keep me looking good while on the road. Your video got me set up right. The lines are Day n Night from before I did the steps in this video! Other thing that was annoying that you did not mention is that the slide piece can fall out of place. I kept fumbling it over and over. Thanks again!

Wow. Thanks so much. I've been pissed about these trimmers since i bought them 1 1/2 years ago. They were hardly cutting at all. I even bought a new blade at one point, still no luck. I followed your info and voila... they work great!

Omg I appreciate you, I’m a single mom trying to give my son a line before school tomorrow. Thanks so much for your help!

I've been cutting my own hair and going to barbers for 55 years. Liner after liner still the same dull line. I never knew to adjust both the blade and the tension. So I tested your guidance. 1st I adjusted the blade. Wow 10 times better than Ive ever adjusted my blade. It was just like going to my barber. However when I adjusted the tensioner! Game changer. Better than the line up with beard I get at the barber. Thank you brutha. This solution is the right way to adjust your blades. Peace ✌🏾

Adrin,your a cool dude homie.alot if barbers wont take the time to show and help other barbers. RESPETO HOMIE

taking that bottom screw out of the casing makes the clipper more powerful was a new one on me thanks for that I appreciate it. 💯

Great video, we all have this problem and most have no idea why a new clipper or new blade sucks. Now, thanks to you, we all know how to fix this never ending problem. Thank you for sharing this with us.

Best video I've seen for adjusting clippers. I've thrown away several pair of trimmer because I couldn't adjust them properly. I followed your instructions/video, and everything came out perfect the first time!

Thank you so much for teaching me how to do this. I love you ♡♡♡ and you information about how to become a better barber.

This was a great video. Clear with good explanations. Third one I've watched today, but you did a fantastic job Bro. I followed every point step by step. Everything worked like a charm.

bro you got it all day u done nothing but kept it real with us some no one done in mm? 4 a long time thank you

Watched your video and adjusted my T-Out liners they hit like crazy! Thanks looking forward to watching more of your VIDS.

Thanks for going into great detail about this process. I'm going to try this out. Great video btw..

Your a life saver man. I was fixing to buy new pair. My friend gave me these she said they wouldn't cut and she bought a new pair. Lol I fixed them thanks to your tutorial.

The finesse, worked like a charm.

I'M NEW TO USING CLIPPERS AND EVEN THOUGH THIS VIDEO IS 3 YEARS OLD YOU TAUGHT ME SOMETHING RIGHT FROM THE START ON BLADE ADJUSTMENT. THANK YOU...

Thank you bro, i been doing this for 30 years and i knew i was doing something wrong.

Thanks man! I thought that my trimmers were broken. This saved me the purchase of a new pair.

I’ve been shaving my head for the last few years with a pair of Andis, this really helped me to figure out how to tune them in right. Thanks very much

Exactly what I needed no surprises. Did just what you said to do and it’s cutting like a dream. Thanks! 10/10!

I appreciate you sir! You gave precise instructions and got me back in the game! I've been using my T-liners for months unadjusted!

Thx Guy..I am a woman and just bought my Outliners today...I like da crisp clean cut and purchase to stop buying so many razors but I will Btryin to do myself..wish me luck😯😃

Brilliant video! I'm shopping for an Andis tomorrow, will try these steps!

Good vid brotha, knowledge is power.

thanks fam on the vid.. great info

thanks man very helpful

Been cutting since i was 11, 35 now great vid for new barbers. RESPECT!!!

After watch this tutorial my trimmers are rejuvenated! Thank you!!

thanks man... really appreciate this video! I threw away my last pair of t outliners because I thought they were broken. all they probably needed was an adjustment lol. thanks again!!! peace

Thanks... Just followed you step by step and just did a all even... Edgers cut like BUTTER

The blade setting with mirror worked great.

I was procrastinating on my finals studying and came across this video. I adjusted the tension on my a día, which I had stopped using about a year ago because I got a pair of pater outliners I liked. And whoah buddy! My T outliners are hitting better than they ever have! This video is gold

I really enjoyed the video, it was very helpful and informative. I'm new to all of this and was wondering if you could explain what does adjusting the blade and tension do for the haircut. Thanks

finna get my shits right

I am a beginner barber been cutting for almost a year, and Wow what a difference.This video helped fixing my tension and zero gapping my trimmer.👍🏽💈

Bro I absolutely want to thank you for making this video! For years I’ve been trying to get my outliner II and t outliners barber quality sharp and in my unsuccessful attempts my clippers have not been solving my razor bump issue. Your tutorial has my clippers hitting and shaving my face effortlessly. I was on the verge of throwing both of my clippers away because I thought they were too old but nope once I got that above half moon on my tension spring I was golden! Only thing is my tension spring never clicked in to place but I tightened the screw enough for the half moon and I was good also the one screw in my case trick didn’t work I needed both screws or my outliners rattled too much! Overall absolute 10/10 video thanks again!!!!

Very informative vid, AD! QUESTION: What is the best blade setter on the market, in your opinion? I've seen a few different ones.

Corona sent me here LoL 😂. Good clip man...pray for me lol

I actually got My T outliners and I did exactly what you said and it came out perfect. I followed your step step by step.

I was about to buy another outliner but I said, "let me check and see if RU-vid has a video on how to fix this" and BAM! There you were. Thank you much. You saved me 60 dollas. How many six packs is that?! LOL

Been trying to learn how to shape my self up and my boys for a while now $80.00 a month for 12 months is almost a stack a year on hair cuts is a little crazy. I had bought a set of Andis Pivot Pro 6 years ago. Is it the same process in setting the blade on the trimmers as the t liners?

Dam I was wondering why my new ones wasnt doing shit out the box duhh. Thanks fam

This video brought new life to my t-outliner's. Simple and effective. Thanks

Man I have been having the hardest time adjusting my blades, Thank you for this video by far one of if not the best dummy proof way to adjust your clippers.

Hi thanks for your video. I'm in cosmo school and they gave us Wahl.... Any idea how to adjust them or what blade setter to get for that brand?

thanks bro thought I fucked my shit up

Just wanna thank you cuz!!! 1st of the year & l finally learned how to adjust my T-0utliners with the mirror... YOU made it easy. Thanks AGAIN

great video! really helped me out i have a brand new outliner and it worked great for about 3 days til it started pulling hairs. thanks for the help!!

Dope bruh. I should just mail u mine and let u hookem up

The first thing imma yaba daba doo

really cool video. I never adjusted any of this stuff on my clippers until now. I have had them for years, and now they work like new.

Good looking out AD...20 years in that tension technic I never knew about...getting up early tomorrow morning and adjusting them.

What does adjusting the tension do?

Great info! Shitty focus on the cam tho !

Picked these up during COVID-19 pandemic and used this to adjust both of mine thanks!!

Yo thanks man i was going through it rn and your video is the only one that actually worked for me.