Andis t liner how to fix when teeth don't move 

This video is exactly what I needed, I’ve been trying to figure out this issue for years. You solved 3 years worth of headache in a 6 minute video!

5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.

I been looking rough for about a month. I was 5 minutes away from buying a new pair. Saved me 60 bucks!! Much appreciated

Just got the Andis Stylist Combo & the T-Outliner blade wasn't moving out the box thanks for the vid just what I needed!

Skip to 3:10 you’ll thank me later. But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼‍♂️idiot

Thanks to this video it saved me a headache because I was about to throw this buzzer out the window lol

5 years later and this video is still saving andis clippers. Thank you bro!

Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good

Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!

Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!

Great video. Just to add, I would try to line up the white ball just below the middle point. If it's too low that means its too tight.

Thank you, just fixed mines and they are working even better

Had mines for over 10years and I was just about to buy a new one! Thanks bro

Dude thank you!!!! I had this issue for almost year after replacing my blade. Thanks for sharing, my andis T liner works great now !

Thank you!!! You are the realist for giving all of us these helpful tools.

My man, you just saved my some money. Fixed mine on first try. Funny enough it was the screws by the switch that had to be loosened. Thanks!!

Thanks man!! I thought my outliner was done but i followed your steps and it works!!

Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇

great help, thanks for the direction, I just finished up working on mine and my dads!

I was about to trash this clipper because it would not cut...now it's cutting again better than before 3 years old!!!

This works. Such a quick and easy fix. I only had my timers for about a year.

Thank you 🙏 it works now ,I had left mines in the truck and I believe from the heat the screw inside got super tight .loosened it up a bit and it works better than before

Thank you bro! I was going to send mine off to get repaired but this worked perfectly.

Hell yeah thanks man this is what was wrong with mine , cuts so good and sharp now thanks .

Awesome video. Thanks for the help!

Amazing tutorial, worked like a charm!

Thank you so much. Was just about to buy another one until I stumbled on this video. It really works.

This helped out a lot. Thank you

Exactly what was going on with mines, the switch was bad, I bypassed the switch and I'm good, better that buying a new pair ....👌🏾👍🏾

Works like a charm thank you sir. You saved me $75

Thnks I was able to fix my husbands clippers!!!!! Saved mad money

Fixed. You the man, thanks my dude.

Man your the best! I was this close to buying a new razor ‼️💯👌🏾

Thanks going to try this in the morning. Mine went days ago.

Needed this vid, man! Came thru for me in the clutch. Much appreciated!

Thank you bro!!! This just saved me another 40 from a haircut #godblessyou

Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.

Great vid thanx for that ...cant count how many new pairs ive bought

Helped me fix mine, thanks bro!

Exactly what I was looking for . Thanks for your video and much obliged.

THAAAAAAANKKKKKKK YOUUUUUUU!!!!! So grateful that you took the time to make this and share it. 💛✊🏽✊🏽✊🏽

A lifesaver man thank you.

Dis a Game changer!! My Second pair was ready toss them like the first one back cutting like new

This video showed me perfectly how to fix my Andis!

Man than you so much. I was about to run out and buy a new one. It sounded like the motor was going out.

Thanks bro! Working even better.

Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue

Thank you!

You saved me $70. Thanks for sharing this

thank you was about to buy a new one. i try this and it works better than before

Saved me $60-70. Thank you❗️

Thank you explained everything 10/10

Tanks so much bro like it’s working better than before.

Works like wonder thank you man!

Thank you very helpful, just fixed mine. You saved me a $1000 Jamaican dollars.

Thankyou this video saved me from going to buy a new pair of clippers

Thanks for the video!

Thanks a mill!

Thank you so much! It worked right away! Appreciate it!💪🏾💯

Good looking out

This worked Thank you!

Thank you and God bless!

This video came just in time. Good Looks

This worked 100% you saved my weekend thanks a million. Thumbs up

Very helpful my brotha

Def worked for me! Thanks

great vid!! works wonders.

It works !! Thank you

Appreciate that. Works like a charm now.

Good looking bro thanks a million!

I love hearing cp24 in the background 😂

Thank you brotha

Very helpful!! Thanks very much!

Thank you so much 👏🏽👏🏽👍🏽👍🏽

Man thanks so much 💯

Great video! Only thing is it coulda been 3 min. Thx 🙏🏽

Nice job! Works like a charm

Does this stop them from puling your hair? My brand new one pulls, even after a shot of oil, and it's quite unpleasant.

Huge thanks man 👍🏽

Thank you bro I was about to buy a new one

Quick and simple, thank you

Gracias!! It worked..!!

Than you! I almost threw mine out

Thanks bro… worked perfectly for me…

Thank you brother

Thank u , saved me some dollars🙏

thanks so much man! You saved me $50 hahah

This video just saved my clippers

This worked thank you for the video!!

Thank you for this video, it worked for me!!

It worked! Thanks.

Saved my ass appreciate it man 🤙🏾

Thank you!!

Perfect thanks!

It work perfect, thanks

Thanks the fix worked!

Helpful video thanks alot

Godsend. Thank you 🙏🏾

Thanks man

Thanks much!!!