No video :(

Perimeter Protection with Hikvision thermal bi-spectrum cameras

Подписаться 250

Просмотров 9 тыс.

50% 1

This is what we currently consider to be the best solution for perimeter protection.
We simulate a guard electronicly, all-in-one:
1. EARS (alarm) Thermal camera - line crossing
2. EYES (CCTV) day/night colour cameras
3. MOUTH (audio) powered horn speakers
When an intruder moves in a restricted area, an image pops up (App / monitor / off-site monitoring comp.)
The camera instantly plays a warning message over the horn speakers. (customizable message)
Live communication is possible from the Hik-Connect App, the guardroom, or the off-site monitoring comp.
We integrate the thermal/colour dual-cameras with PTZ cameras, PIR sensors, or any other triggers.
The PTZ camera will turn & zoom in on any triggered area.
(Radar us also available to do this: 120° radius of up to 400m)
An IP video intercom and wireless alarm can also be integrated with the cameras, App & recorder on the same platform.

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@michaelh5722 Год назад

Really enjoyed learning some extra tips I can do with my own installation. People in my part of the world don’t take security as seriously as this.

@bolandsystems9707 Год назад

Yeh, we sit with mostly petty crime committed by people who will steal whatever they can get to pawn for food. That then escalates to cable theft or any other copper (metal) product, to sindicates aimed at electronic equipment.

@Dolly-Days 11 месяцев назад

Very nice setup! I know I’m just the 8 cameras I have, it was about $2,000

@SafeAndSecureAlarmsTV 6 месяцев назад

Hi love these videos. What is your experience with the thermals vca detection in moderately dense folioage - pine trees and large bushes. Does it still detect human intrusion? Thanks

@bolandsystems9707 6 месяцев назад

Hi. No, it detects heat, therefor it needs a clear line of sight. A cleared strip of about 2m is usually requested outside the fence. Max. & min. sizes must also be tested near & far

@Quadraphoria Год назад

Our cameras and lights were mounted similarly, however the camera and light was stollen. We had to reinstall inside the yard with electric fence and perimeter beam

@alroylewis1603 Год назад

Woow love the set up question the external speaker are they 12 volt r 120 volt

@bolandsystems9707 Год назад

12Vdc. See comment higher up for info

@nayakacreativity3639 Год назад

How much storage did you use to record all of that cameras ?

@bolandsystems9707 Год назад

4TB. Triggers are accurate, so not to many unneccesary recordings. More than a month's rec.

@amirm1553 2 года назад

Great video! Whats the detection range on that thermal cameras and what modell do you use?

@MrBoomin 2 года назад

These seem to be Hikvision thermal cameras and set up

@bolandsystems9707 Год назад

Sorry for late response... The new bi-spectrum QA-models spec 77m, but we don't push past 60m. You need around 8-10m deadspot coverage under each camera by the previous camera overlapping. DS-2TD2628-10/QA www.hikvision.com/africa/products/Thermal-Products/Security-thermal-cameras/heatpro-series/ds-2td2628-10-qa/

@jameswells3657 Год назад

Please tell me what speaker you are using. I would put the speaker separate from the camera so that attention is not directed towards the expensive camera, which could be vandalized.

@bolandsystems9707 Год назад

TOA 10W, 15W 8ohm combined with an amplifier PCB placed in a small water tight box so we can access volume settings. 100W 12V amp PCB with vol. pod (TOA has a 12V powered horn, but I find this PCB better & cheaper) Other cheaper PCBs don't have a pod. www.robotics.org.za/XH-M542?search=100w%20amp

@bolandsystems9707 Год назад

Inwill be posting a video of our latest project with the newer QA-model, combined with DS-2T46G2-ISU/SL Acusense cameras, horn speakers, 4-button IP video intercom, gate motor with FLUSS Bluetooth App triggered gate, UPS with small LiFePO4 battery (change-over period till generator kicks in) We had to add 48V batteries to one PoE Dahua rugged switch, which is not on the UPS. (PFS3106-4P-60)