Perkins Diesel Engine Build Pt 2 Piston Install Plastigauge PPG Peaks

Подписаться 457 тыс.

Просмотров 40 тыс.

50% 1

Part 2 of the build series! Diesel piston rings are STRONG so they can have higher compression. Watch it SNAP my ring compressor tool LIVE! Learn how plastigauge works to measure oil tolerances. Learn tips and tricks for installing pistons. BFATE includes bomber wreckage, extreme altitude, and a smooth landing.
Red engine assembly lube used → amzn.to/2OgJ3Qh
Tough little impact gun used → amzn.to/2lxdaWg
Engine stand → amzn.to/2lxyhIo
Snap Ring pliers → amzn.to/2Nel82I
Plastigauge → amzn.to/2LKQFsp
Download a Perkins Engine Manual FREE → www.kdtrading....
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Pull-a-Part Challenge video 3 → • The Pull-A-Part Challe...
Disclaimer:
Training and discretion is recommended before attempting anything portrayed in this video.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and reputable gear when paramotoring.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling like a FORCE for win! And if nothing else, perhaps you had a laugh and were entertained!

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@wyattoneable 6 лет назад

It's been a long time since I reassembled an engine but when I did I was sure glad plasigauge was around. It's such a simple concept but way accurate. Fun flying around mountain tops.

@strongmonty 5 лет назад

When torquing the connecting rod nuts, I noticed that one side of the nut is "normal" and the other has a smaller ring machined into it. Obviously, the normal side would hit torque first as it has more surface area than the "ring" side. I've searched online and checked my pics from the teardown but I'm coming up empty. Could you drop some knowledge please, Brian?

@ArchesMechanic 6 лет назад

As I said in a previous video. Very interesting to watch these. Even though all engines are different...the similarities of the steps are very interesting to watch. I, to this day have never rebuilt the bottom end of an engine but hope to someday.

@greasyhandsauto-shaunbutte9726 6 лет назад

I love that you’re human. I’m sure compressing 5 rings is a bit more difficult than the traditional 3. Nice work!

@briansmobile1 6 лет назад

Aren't we all? I made at least 3 mistakes on this video too! lol Been putting in some crazy long hours lately. : D

@bfields1448 8 месяцев назад

Kohler magnums engine has ball bearings on the rods and crank. Harbor China freight

@ozzstars_cars 6 лет назад

Nice explanation Brian. Enjoyed the video. Once again that parasail view is amazing!

@terrancekabir4896 3 года назад

i dont mean to be so off topic but does anyone know a way to log back into an instagram account..? I somehow lost my account password. I would appreciate any tricks you can offer me.

@kanekarter1249 3 года назад

@Terrance Kabir instablaster :)

@terrancekabir4896 3 года назад

@Kane Karter I really appreciate your reply. I found the site on google and im trying it out now. Takes a while so I will reply here later with my results.

@terrancekabir4896 3 года назад

@Kane Karter it did the trick and I finally got access to my account again. I'm so happy:D Thanks so much you saved my account !

@kanekarter1249 3 года назад

@Terrance Kabir No problem :D

@leor838 6 лет назад

You should have said abundant not prolific. Try putting on the ring compressor before you drop the piston in the bore next time.

@dudeandD 6 лет назад

either way

@DiegoPerez-um5lo 3 года назад

I have a problem with a perkin fase 2 354 can you help me.

@AntonioClaudioMichael 6 лет назад

There is also a yellow plastiguage also brian

@txsviking 6 лет назад

Another great video! Enjoying the series.

@robertoswalt319 6 лет назад

Great video, Also I am glad that your girls are curious about what you do. Hopefully they will feel empowered and ready to take on the world later on.

@briansmobile1 6 лет назад

There's something about that age where they are overconfident if anything. Too fun!

@willhikearizona 6 лет назад

Good video, I have always wanted to rebuild an engine. Someday when I have a nice shop like yours. What is the building on top of the ridge?

@briansmobile1 6 лет назад

That's for surveying purposes. It's used to triangulate locations in the valleys on either side of the mountain. It was just the cone/point, but with so many visitors they made up a little shack semi-enclosure below it too. That little building often sees about 100 visitors a day in the summer months. There's a log book in there to help people determine in/when folks go missing. There's usually a dozen or so rescue/death/missing person events per summer. I know there's at least 2 bodies on that mountain that are not yet recovered. If a lightning storm is hitting the top you can take refuge in the shack. I saw a male and female hiker descending the trail that night halfway between the shack and the saddle.

@bahmanimaize Год назад

Merci beaucoup pour votre information sur le moteur ❤❤

@landlockedviking 6 лет назад

One day I hope to put one of those in a truck,a six though. The couple I've seen done got amazing mileage. Great vid!

@briansmobile1 6 лет назад

Was it you that showed me the guy who put one in an older Chevy pickup? That was sweet! Turbo is always a good idea too. This Skytrak sips fuel.

@landlockedviking 6 лет назад

briansmobile1 I don't recall but the one was a 50's chev, the other was a 70's Ford. On the chev they mated it up with a custom bell housing and ran a 5 spd dodge tranny

@AntonioClaudioMichael 6 лет назад

Great video brian

@creigmacc 6 лет назад

Soon buying a Nordic tug with this motor, awesome video series!!

@briansmobile1 6 лет назад

Thanks so much! Glad to hear it. It's been a ton of work, but it's been fun too.

@rehaandieselengineworks2145 4 года назад

Hi big bro I'm diesel mechanic Plz send 3.9 parkin workshop menual pdf files

@jobeppe 5 лет назад

I was scared when you rotated the engine without supporting the pistons from bottom, they could fall off. It happend to me reassembling a Porsche 911 engine, I rotated the engine on the stand and one piston decided to fall on the floor.. luckily nothing happend to the piston and the rings.. but it was scary! Porsche pistons and rings are expensive

@bojahnoali 6 лет назад

Nice work my professor excellent job

@briansmobile1 6 лет назад

Thank you

@justencase1523 5 лет назад

PLASTIGUAGE IS AWESOME! I learned something new. Thank You Brian. I bought a mini ex with a blown engine and I need to rebuild it so I am thankful for your video.

@leebarnes655 6 лет назад

There is no plastic in plastigauge. Plastic is being used as a verb here. Instead, it is just what it looks like it is - wax.

@adrianlastname4864 6 лет назад

I enjoy your no bullshit, straight to work approach.

@blackwaltz13 6 лет назад

instead of using plastigauge i just tighten each rod and turn the crank to make sure smooth no play and no resistance as i rotate . but what the hell do i know right

@hotord205 6 лет назад

you make very interesting and informative video keep up the great work 👍👍👍👍

@dojmike 6 лет назад

One piece ring compressors. The only way to go. Not sure if there is one made to fit these pistons.

@carlosmedelestrada9558 6 лет назад

excelente video............EXCELENTE INFORMACION.

@doug1030 6 лет назад

Gee you might find it at your local parts store.

@jardo531 6 лет назад

Watching this is oddly satisfying.

@Rhyno430 6 лет назад

wow, i am surprised someone hasn't complained about the plastigauge in the comments.

@leebarnes655 6 лет назад

Such as? Not really needing to do it on a fresh grind with new bearings? Do it like you want to - I only use it on used parts to find out where it is at currently. .003 and .005 undersize bearing shells are commonly available for tightening up a bottom end if you don't want to yank the crank for a grinding. And some would hoot and hollar about that while I still don't care what they think or say. Doing it just to show how to use it is worth doing when you are a you tube creator. Too many don't know about this tool, that's not good at all.

@Rhyno430 6 лет назад

Lee Barnes my, you get awfully defensive about a simple comment. You also seem to assume I don’t like the stuff, why would you assume that? People like to bitch about it, especially in my area, don’t know why, don’t care why, simply whenever it’s talked about around my area, someone bitches about it, or anywhere I’ve seen it mentioned really. My theory is they’re all racers and frequently blow up engines and want something to bitch about.

@leebarnes655 6 лет назад

Just didn't understand your simple comment. No assumptions made here, just a possible angle guessed at and chased a bit, more because I wanted to go there than what I read. Thankfully I haven't run into that particular crowd but I have next to nothing in common with people that can waste money on racing other than some HP books for light reading. I would be in your camp with don't care why they could bitch about it. It's not lying about anything, if they can't keep a bottom end in it, that's all on them and their quest for RPM. Only thing I've run into is a lol snarky shot about maybe using a micrometer for that instead and of course that's a pretty silly waste of time when this stuff has been doing fine as is almost from day one. 45 years ago when I cut my teeth this stuff was already older than dirt. I dismissed it as obviously he hasn't been around too very much. I will use a micrometer but mostly to check for an egg shaped rod journal and a nearest undersize guess.

@alexxela8782 5 лет назад

😵😵😵

@satamanschmidt3428 6 лет назад

Call the boys at Total Seal here in Phoenix and they will make you a size specific cone type compressor. That's the only way to go.

@Limeayy 6 лет назад

8:48, no assembly lube link.

@briansmobile1 6 лет назад

Thank you! This one was wrapped up in the early hours... and I've been sick! : P

@Limeayy 6 лет назад

oh ok. Sorry to hear that. Keep up keeping up Brian! :D

@leebarnes655 6 лет назад

STP motor oil treatment will do just as well, my mentor used it all the time before they thought to dye it red, call it something else and overcharge like the dickens for it. While I moved onto white lithum grease in the handy squeeze tube and I don't have sticky drops of STP on the floor anymore. Or my hair, pants, shoes,...

@Limeayy 6 лет назад

Lee Barnes why white lithium for assembly lube?

@leebarnes655 6 лет назад

Lime, first tube came in the engine kit so I tried it and fell in love with how it stays put exactly where you put it and never drips out and away like the STP type does. The tube said right on it - Engine Assembly Lube, blue and white about the size of a tube of caulking with handy screw on cap with nozzle. I don't even have to touch it. Later on I found out what it actually is, same stuff GM put on the door hinges and latches for decades on end, Bet I could go out to the 62 corvair and dig some out now, the stuff really stays put.