Тёмный

Perkins Diesel Engine Timing Marks in Full HD 

Подписаться
Просмотров 434 тыс.
% 1 975

See what the timing marks are supposed to look like for the injector pump, camshaft, crank, and idler gear on a Perkins 4.236 Diesel Engine in HD. I'll explain what do look for and how to line them up properly.
My favorite pants EVER great for everything including kneeling (removable kneepad pocket sewn in) stretchy waist, belt loops, pocket knife pocket THE WORKS! → amzn.to/2plr7YY
Consider following me on social media! You'll be among the 1st to see what projects I'm working on. You can ask for video on it or just check up on what I'm working on now!
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Pull-a-Part Challenge video 3 → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Fu4V9I8i6mU.html
Disclaimer:
DO YOUR HOMEWORK before making a decision based on information you find on RU-vid, or anywhere else when it comes to your car, the environment, or your safety.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and respiratory protective devices when working on vehicles and or with tools seen or implied in this video.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling empowered! And if nothing else, perhaps you had a laugh and were entertained!

Авто/Мото

Опубликовано:

 

15 апр 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@spelunkerd
@spelunkerd 6 лет назад
Good for you, to give back to the community for anybody in the future who may need similar info. Those who make the effort to give back are a very tiny fraction of all users.
@Viyunimwera
@Viyunimwera 2 года назад
So5c injection timing
@dancs5414
@dancs5414 6 лет назад
I've been working on this 88 Camry 3sfe for some time now. I was checking grounds and continuity. I considered buying a tone generator tool that you used on d6Spanky corolla fuel issue video. I did find some interesting readings yesterday with continuity checks. The VTA wire and IDL wire from the throttle sensor to the computer. IDL gave a consistent reading. VTA was unstable. Now I do want a tone generator. Trace down the short.
@piewolfe
@piewolfe 6 лет назад
I've got an '86 4.236 on a Cat loader-backhoe. It has plenty power, cranks on second turn and idles with a purr at 450 rpm with oil pressure over 40 psi... No leaks anywhere. A lot of keeled sailboats use these for auxiliary power. The US corporate headquarters/distribution center for Perkins is in Jacksonville. Just across the river 20 miles from me.
@nottypinoy
@nottypinoy 5 лет назад
I'm trying to figure out the timing ratio between the crank and the inj pump. I'm thinking that the inj pump will hit all 4 cylinders in 1 rotation, which would be 2 rotations for the crank? Your ideas. I am trying to install the inj pump back onto the engine. Possibly the side cover shall be opened to align No 1 visually inside the pump...?
@titokhairdin7019
@titokhairdin7019 2 года назад
سخش
@amir-khanengineer
@amir-khanengineer 3 года назад
Good work
@SteveRobReviews
@SteveRobReviews 6 лет назад
Looks quite similar to my Kubota 2 cyl diesels. Cheers bud .
@hamzahabits7912
@hamzahabits7912 3 года назад
Thanks for sharing this video God bless you
@stratta_yt
@stratta_yt 6 лет назад
Oh man this takes me back to 2012-2013 where I worked on a few engines.
@klodiankurti3679
@klodiankurti3679 3 года назад
Do you know how to set time
@yopyop3933
@yopyop3933 3 года назад
Did you ever come across a Perkins with a vacuum pump??
@alatberat99
@alatberat99 2 года назад
good job
@DENicholsAutoBravado
@DENicholsAutoBravado 6 лет назад
Sweet!
@agerardomp
@agerardomp 6 лет назад
Good Job Brian; thank's to share allways with quality video And información! And congratulations because you are so clase yo 250 K subscribers, big hold! (ABRAZOTE! from México city)
@agerardomp
@agerardomp 6 лет назад
Close to
@briansmobile1
@briansmobile1 6 лет назад
Gracias amigo!
@djunansyahyunan7587
@djunansyahyunan7587 3 года назад
Very nice and good Thanks infrometion for me
@jakethetool9024
@jakethetool9024 2 года назад
I’d sure like to know if that distributor gear can jump timing, with the cover in place? My starter was cranked, ever so briefly, but I managed to align and install the pump, and haven’t pulled the cover to investigate.
@MitzvosGolem1
@MitzvosGolem1 5 лет назад
I had a few motors which appear half a tooth off not on mark. I put paint marks or scribe before disassembly to avoid issues. One odd tooth on one gear insures equal wear since two teeth never consistently mesh on the same power pulse. Ducati has this idea . Look up a Napier Deltec engine ..
@emmamariephoto
@emmamariephoto 3 года назад
Just wondering if you know which mark for flywheel timing is required for a P[erkins 236 on a Massey Ferguson 175? Thank you
@flat6targa
@flat6targa 6 лет назад
The idler should have a hunting tooth ( one more than twice the other gears, 24-49 etc) in it and you should be able to take it off and line a the other marks up and put it back on. At least that is how it works on the engines I have worked on.
@alastairwaters9114
@alastairwaters9114 4 года назад
Do you know how to lock the crankshaft gear on a perkins 1106a 70t ? I have cylinder 6 on the rock. Timing Mark's aligned on gears at the front. Cam shaft lock pin is in however on the 1103 and 1104 there is a pin that locks the crank but on the 1106 it's not there. Any info you can help me with I would be grateful cheers
@deutschapx8039
@deutschapx8039 5 лет назад
this engine type still works in our pushback car, douglas.
@robertoswalt319
@robertoswalt319 6 лет назад
Brian, I have a couple of off topic questions I hope you can answer for me. My father passed a while back and I am cleaning up the garage. I ran across several full cans of R12 refrigerant. Is there any market for R12 anymore? Is it legal for someone like me to sell it? Thanks
@45spradlin
@45spradlin Месяц назад
Is that to take it to top dead center im replacing an injection pump on a perkins 2160
@franciswanuke572
@franciswanuke572 2 года назад
Help me have the same engine which I am rebuilding after finishing all tried to start it's failing to start.timing it's correct,fuel is coming out nicely
@embededfabrication4482
@embededfabrication4482 13 дней назад
How can we find TDC when adjusting valves?
@hubertrobinson8825
@hubertrobinson8825 3 года назад
Once you line them up it takes several turns to bring them back where it should be I don't remember how many turns been a long time since I worked on one the 203 and 152 engines takes a lot more turns than the 236 or 248 engines
@mauricioibarra589
@mauricioibarra589 Год назад
Hi Friends, is this info good for a 1104D - 44t engine? thank you.
@rajbahadur2162
@rajbahadur2162 5 лет назад
Nice vidyo sar
@creigmacc
@creigmacc 6 лет назад
Popular motor on 28 foot Nordic Tug boats. Amazing efficiency, 4000 hours is just getting seated in.
@briansmobile1
@briansmobile1 6 лет назад
This one is at 6k hours, but at dirt and water and then sat for 12 years in the weather with the intake open. I guess that's bad?
@briansmobile1
@briansmobile1 6 лет назад
*ate
@creigmacc
@creigmacc 6 лет назад
briansmobile1. Seen many of these motors in Marine applications where they didn't have OEM air filters. Guess they figured dust can't float over water. If you're still working on this one I'm sure many of us would love to see more of the rebuild.
@yopyop3933
@yopyop3933 3 года назад
Does anyone have a Perkins with a vacuum pump in it? The one that goes under the fuel inyeccion pump..
@marciaruggiero3466
@marciaruggiero3466 Месяц назад
What if you can’t get them to line up? I, about 1 off no matter how many times I rotate
@Hamid-ei2hg
@Hamid-ei2hg Год назад
Sir can I ask you a question?
@rollymendoza1028
@rollymendoza1028 4 года назад
Hope you can help me, what is the valve clearance for this engine??
@ZahidIqbal-ln8we
@ZahidIqbal-ln8we 3 года назад
8 for inlet and 12 for exhaust.
@franciswanuke572
@franciswanuke572 2 года назад
Can wrong timing valves makes the engine not to start just from rebuilding
@samaunlapene871
@samaunlapene871 5 лет назад
my machine at the time of star's initial sound was rough. I asked for enlightenment
@ibrahimabdullah7793
@ibrahimabdullah7793 5 лет назад
I CAN START ENGINE WITHOUT ANY TIMING MARK OF CRANK CAME AND INJECTION PUMP, YOU CAN FIND FIREING ORDER FROM CAME SHAFT , CAM AND CRANK MAKE FIREING ORDER,
@danielkaffeh
@danielkaffeh Год назад
Valve adjustment
@franciskomba3600
@franciskomba3600 5 лет назад
How to do timing on Perkins 1300series
@alastairwaters9114
@alastairwaters9114 4 года назад
Heui?
@Allendog05
@Allendog05 6 лет назад
Jerry sent me here
@wyattoneable
@wyattoneable 6 лет назад
That could be confusing indeed. I'd be lining up the two marks with the two marks and yeah, I better not try this at home.
@redullamichael986
@redullamichael986 3 года назад
Gosto k matuto s timing Ng howo
@KJ7XJ
@KJ7XJ 6 лет назад
more soobie vids :)
@briansmobile1
@briansmobile1 6 лет назад
Okay!
@easydoz1
@easydoz1 6 лет назад
Who is Perkins?
@briansmobile1
@briansmobile1 6 лет назад
Frank Perkins was an entrepreneur from England. He started a prolificly popular high speed diesel engine company in 1932 that bears his name. Today the company is a subsidiary of Caterpillar. Perkins engines are found world wide in boats, tractors, material handling equipment like mine, and power generation equipment and even trucks and taxicabs etc.
@GammaCruxis
@GammaCruxis 6 лет назад
I counted 58 - I could be wrong though lol
@DENicholsAutoBravado
@DENicholsAutoBravado 6 лет назад
I'd have to put it in paint then mark it off a bit. In real life it's easy to put your hand on a tooth and count from there but digitally it's much harder - I tried on another video once where the comment was about how many degrees timing was off based on tooth count vs how many teeth into degrees. :)
@Jscboxer
@Jscboxer 6 лет назад
56 is what I finished with, maybe I need to retake 1st grade.
@mindaugaskvasys4960
@mindaugaskvasys4960 6 лет назад
I counted 56 too xD
@fredflintstone8048
@fredflintstone8048 6 лет назад
Doesn't seem confusing to me because you're not going to be able to line the marks up any other way than how you did it. Give it a try.
@hotord205
@hotord205 6 лет назад
👍
@ammaralyasiri4191
@ammaralyasiri4191 4 года назад
Troubleshooting manuals perkins 1300 series olympian pdf
@ivicaice7
@ivicaice7 6 лет назад
This is not a good explanation anyone can put the marks together but you didn't told the most important thing.BEFORE YOU PUT THE MARKS IN PLACE THE FIRST PISTON MUST BE IN TOP DEAD END and then align the marks otherwise you won't start the engine.
@klodiankurti3679
@klodiankurti3679 3 года назад
Can you help bro...i have a perkins ad4 203
@ozzstars_cars
@ozzstars_cars 6 лет назад
That's a lot of marks and teeth.
Далее
Manual installation process of highway guardrail
0:15