Permanent Jewelry Webinar Replay from April 5, 2023 - Melissa Muir & Sunstone Engineering

Подписаться 44 тыс.

Просмотров 23 тыс.

50% 1

PERMANENT JEWELRY WELDING SECRETS:
Here is what we will cover in this webinar.
* Power settings and what they mean
* 3 key electrode facts that change everything
* Argon: What it is and why you need it
* How to close a jump ring or link
* Selecting proper chain size and type
* Troubleshooting flat spots, blow out's, and incomplete welds
* What you need to know about fine chain
* How to keep you and your customers safe
Be sure to subscribe: bit.ly/2dyBgwT
Links to Discounts and Tools Used In The Webinar:
DISCOUNTS
$50 Admission to the Permanent Jewelry Expo (PJX) in Las Vegas at Caesar's Palace, May 29-June 1. MMWEBINAR
$100 off an Orion Pulse Arc Welder: MELISSA100
CORDLESS DREMEL
amzn.to/3ZXHvyj
TRONEX SHORT HANDLE PLIERS
www.micro-tools.com/products/...
TRONEX LONG HANDLE GROUNDED PLIERS
www.micro-tools.com/products/...
XURON
www.micro-tools.com/products/...
SWANSTROM HAND SHEER
www.riogrande.com/product/swa...
SPEED WIRE HOLDERS
www.stuller.com/products/spee...
PLATINUM/STERLING FILLER WIRE
www.silverweldingwire.com
WELDING GLASSES
www.micro-tools.com/pages/sea...
amzn.to/3mjQ5cM
STYLUS & ELECTRODE COVER
sunstonewelders.com/products/...
ORION PILOT ELECTRODE SHARPENER
sunstonewelders.com/products/...
To contact and follow me use these:
Email: Melissa@melissamuir.com
Web Page: www.MelissaMuir.com
Shop: toolcandystore.com
Pinterest: / melissa_w_muir
Instagram: / metalsmithmelissa
Twitter: / melissamjewelry
Facebook: / melissa.muir.jewelry.a...
Amazon Affiliate Page: www.amazon.com/shop/melissamj...
Affiliate Disclosure: I do receive a small commission from some of the links and companies for purchases made through these links. This helps to purchase better equipment for the studio so I can share more great tools and features with you. Thank you for your support.

Опубликовано:

9 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@cristinamarculet2488 15 дней назад

Great, thank you! Helps me a lot!😍

@MelissaMuir 5 дней назад

Glad to hear that! Thank you so much for your support. I really appreciate it.

@EverythingParanormal666 4 месяца назад

love your content its so informative and easy and clear to follow so thank you for you time and effort

@MelissaMuir 4 месяца назад

Thank you for that feedback. I really appreciate it. ❤️

@user-my1xi9mf5q 11 месяцев назад

your videos are SO informative! thank you so much for sharing, this is very helpful for beginners looking to get into the permanent jewellery space :)

@eb1138 Месяц назад

Great video. Thank you for sharing your learned experiences

@MelissaMuir 27 дней назад

Thanks for watching!

@emilyharo6077 11 месяцев назад

Thank you so much for sharing your knowledge. Such great information in this video!

@christinaroosman65 9 месяцев назад

Melissa, I'd love to have your jump ring notes with the energy number that works best for each thickness! Could you post the images?

@hannahwink Год назад

You were so informative!!! Great video❤

@KyIeMcCIeIIan Год назад

I just bought a fully welded chain mail shirt. It's just butchers mail, only 24 gauge stainless wire, but still needs an argon set up to be properly tailored. Hence, my need for an education in welding small wires. Thank you so much for the video! Please never delete it!

@rubyfrankie 10 месяцев назад

awesome video, very informative

@MelissaMuir 9 месяцев назад

Thank you

@kyleatudub 9 месяцев назад

i love a three holer. Way better than two. Support U.S. made!!!

@sheriobrien3000 9 месяцев назад

Melissa, thank you, thank you, thank you! I just purchased the Orion PJ for permanent jewelry and for other uses. I have been metalsmithing for 3 years now taking courses with The Jewellers Academy. Your video is a breath of fresh air. Knowing the jewelry making side of things leaves me with so many questions from other training I am finding online and some of the comments I am seeing in the PJ groups on social media. I am definitely interested in additional training with you. Please let me know how I can find out what your offerings are. Thank you again for sharing your expertise.

@MelissaMuir 9 месяцев назад

Thank you so much. I really appreciate that feedback. You can shoot me an email and we can work out a one-on-one schedule melissa@melissamuir.com

@AmoreAG 8 месяцев назад

Hi! I was hoping you would be able to share pictures of your welds in your notebook like you did for your sterling silver. I know you said it's best to do your own but this would be a great starting point! I have been looking everywhere for somewhat of a guide for wattage with certain metals/sizes. Thank you for your very informative video!

@KC9RXP 10 месяцев назад

I weld alumimum, steel, and stainless. Copper sometimes. A lot of this translates to silver and gold apparently. Blunt the tip with aluminium also.

@duocmat5192 Год назад

👍👍👍♥️

@360nky Год назад

do you have links to the suppliers you mentioned in the video? there are so many websites out there it would be helpful to have the right ones

@miguelangelsotelo4390 Год назад

Cuando se pone en El LADO de coarse tune y microtune para cadenas

@lisavelazquez9616 8 месяцев назад

Are these speed wire dispensers available empty? I already have so mich filler wire! Thx! Edit: never mind! I see it now!! Amazing vid...as ALWAYS!!

@MelissaMuir 8 месяцев назад

Thank you. Apparently they didn’t used to offer them empty. So glad they do now.

@debbiebebington9803 10 месяцев назад

Hi you should always sharpen a tungston rod vertically then wipe off never use a grinding wheel or diamond tip dremmel, use a belt sander is best and only use this for sharpen tips,the way you show, tungston tip used should be red tipped tungston is 2% theoratated You have done your research well Debbie welding instructor for offshore pipeline welding

@MelissaMuir 10 месяцев назад

Great point!

@ingrislt 28 дней назад

Hi, with this Device can weld aluminium?

@MelissaMuir 28 дней назад

Yes. You can

@ravnroxi Год назад

Great information! You are really good at explaining in a way that makes sense and practical. I was able to follow (understand) even though I'm not a professional. Heck, I'm not even a hobbyist anymore. I was....TWENTY YEARS AGO but haven't "made" anything (other than for myself for years) I just found you in a search for permanent jewelry. For years I've have had my bracelets soldered on by a dear friend (who pasted away last year) I've been unable to find a jeweler that will do it for some reason. Do you have any suggestions "how" I should ask? I've taken 3 bracelets (two sterling one a "Kabonna" & a "Bixby" and one GF but over a hundred years old GF (I wore this GF bracelet everyday for 10 years and it still looks like solid gold, I don't know how they did GF back then, but the quality is simply AMAZING) to in and had security chains installed and they always break at the jumping even though they're "supposedly" to be soldered .

@MelissaMuir Год назад

That is an amazing gold fill. Are you positive that it is goldfill? How did your friend solder the bracelet on? With a torch?

@casade2831 8 месяцев назад

Hello, When welding gold, does pulse welding introduce any additional material to the part being welded, or does it merely connect the gold material without adding extra substance? If so, is it essential for the wire to be made of gold? Thank you for your video.

@MelissaMuir 8 месяцев назад

Without adding anything it is fusing the materials. When I add material, I want it to be the same as the material that I am welding.

@chiharufujita-nl2ng 5 месяцев назад

I am thinking about buying Orion mPulse Pulse Arc Welder or 100c. I am worried about power of welder. I am using 14K gold field wire from 26gage to 10gage for my jewelry. which one do you recommend for me? Could you give me an advise ? I learned about using 18K filler for welding 14KGF in this video, so I am going to use 18KG too. I am really excited to use welder machine. Thank you!!

@MelissaMuir 5 месяцев назад

It will have a harder time with 10 gauge. The lower gauges of wire should do well. But as you get higher, you will need more power. And you won’t get as deep of a weld. The mPulse will certainly not do well above about 14 gauge. Go as high as you can afford.

@awakenyourzen Год назад

Curious to know if this same welder can be used for jewelry fabrication and repair? (ring bands, embellishments, etc.)

@MelissaMuir Год назад

Yes. Absolutely. If you look at some of my other videos you will see that I have a few videos where I use it for fabrication and such

@awakenyourzen Год назад

@@MelissaMuir thank you. I want sure f it was the same unit. That helps me with justification to buy :)

@MelissaMuir Год назад

@@awakenyourzen the mPulse30 doesn’t have a lot of power. So it would Be able to do small things. I have the 200i that does most of my bigger stuff.

@JilChitsa Год назад

Gosh where have you been throughout my journey? I’ve set up as a business but struggling with keeping my welds strong. No matter what I do the jump rings don’t touch, any advice?