Тёмный
No video :(

Peterbilt 359 Restoration Ep. 10 Frame Blasting 

TwinStick Garage
Подписаться 149 тыс.
Просмотров 210 тыс.
50% 1

#littlebylittle359 #twinsticks #twinstickgarage
Just a good ol' boy born and raised in Alberta, Canada, I’m the proud owner of this 1979 Peterbilt 359 rescued after it was left for dead in a farmer’s field.
Originally used for hauling heavy equipment in the Alberta oil fields, my Pete later ended up pulling a gravel belly dump b-train until it was eventually “retired” to haul the occasional hay bale load for local farmers before being parked in a field near the owner’s home near Mundare.
In the late 90’s I learned the art of trucking from my cousin driving an almost identical 359. I went on to become a mechanical engineer working for a large international corporation but all the while never losing my love for classic trucks and always had my sights set on a twin stick 359.
After placing an ad on Kijiji looking for one, I was contacted almost immediately by the owner of a Pete with a 6x4 Spicer who was very surprised that anyone would want a two-stick transmission. I went out to see the truck that weekend and ended up buying it “as is/where is” (see Season 1 episode 1). I ended up mounting new tires and wheels on the front and had it towed home.
Powered by a Caterpillar 3406A, it has a deep reduction plus Spicer 6x4 double overdrive transmission. The tractor is all original but unfortunately suffered from generations of mice growing up in the interior while it was idle.
I’m currently in the process of restoring this Pete and plan to use it primarily for personal use when finished. I’m looking forward to driving it to shows or the lake with my 5th wheel camper in tow.
I’m not planning a “full classic resto,” but rather a “make it as nice as possible” and as close to original as I can. Planned upgrades include a drop visor, 8-inch straight pipe miter stacks w/pickett elbows, new Bostrom low rider seats, upgraded sleeper, new interior, Texas Blade front bumper, chrome air cleaners, polished tanks and wheels, lots of lights, train horns, classic dual round headlights, and a new paint job in Peterbilt Sovereign Blue with Seminole stripes.
My backyard DIY outdoor restoration of this classic truck in the sun, rain, snow and wind is currently being fully V-logged on RU-vid … checkout “359Twinsticks” to see them all / @twinstix
Support 359Twinsticks on @patreon patreon.com/35...

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 193   
@ronnies379peterbiltexperie2
On a Twinstick binge ! Love the work from 5 years ago
@pitbulltrucker783
@pitbulltrucker783 6 лет назад
Keep making videos man look forward to how it turns out👍👍
@CAROLINAWILDMAN
@CAROLINAWILDMAN 6 лет назад
Love watching the progress 👍🏼👍🏼
@Stage2user
@Stage2user 6 лет назад
i like your project and i want to see more videos. great job !
@jockschmelzer8723
@jockschmelzer8723 6 лет назад
Gidday from Australia. Really looking forward to seeing you get this Pete rolling! Great project- keep up the great work & posting updates. Love the twin sticks!
@kenmakowski9422
@kenmakowski9422 6 лет назад
Looking good. Keep it up buddy. I’m gonna watch till you get it done.
@familytraditiontransportat7951
You will not be disappointed with the Dan's shop wiper (dirks) kit. I've done two in both my 359s and they work great! Flawless install. Keep up the great progress
@mjmontenegro2092
@mjmontenegro2092 6 лет назад
I think your doing a great job because your restoring history
@fhwolthuis
@fhwolthuis 2 года назад
Great video's! A truck without front brakes? Amazing! Can't imagine that having been possible here in Europe 😂
@MegaDtard
@MegaDtard 6 лет назад
Super excited to see more of this bad ass truck. Keep up the awesome work.
@maidenrulz73
@maidenrulz73 6 лет назад
Glad to hear you’re putting the single rounds on.....I’ve been looking forward to another vid...keep em comin!
@fontana101
@fontana101 6 лет назад
Glad to see a fellow Albertan making awesome videos, can't wait for the next episode!
@brianjoyce7477
@brianjoyce7477 6 лет назад
Very joyful watching your hard work on this 359. Drove one many years ago and would like to again. My brother totaled it on Donners Pass. No lives lost but big mess. Oh those trucker stories to tell. Good luck and I’ll be watching your progress. Be well
@TwinStix
@TwinStix 6 лет назад
Brian Joyce thanks for the kind words
@JDT-tk5fu
@JDT-tk5fu 6 лет назад
Looking good keep up the hard work. I think the single round is the only way to go on the Petes. Dont let the money pit commits bring you down, I am currently restoring a John Deere 4430 and have sank alot in it but its just about finished and I cant help but to smile every time I walk in my shop and see it. BTW be sure to put some type of primer over the bare metal as you sand blast cause blasting paint off is alot faster than having to blast rust off.
@michael8271
@michael8271 6 лет назад
Love watching your videos of this older peterbilt please keep making them
@phillipmccormick1508
@phillipmccormick1508 6 лет назад
all right now good to see ya well keep my eye on you, ya. go for it ya.
@keithraines298
@keithraines298 6 лет назад
I had the windshields replaced last year in my 1986 peterbilt 349 the guy had no problem ordering the replacements. They had a little more tint then originals. If they make them use laminated glass not just plate glass.
@scottrandal3219
@scottrandal3219 5 лет назад
The rubber duck is perfect for this truck love it
@BestBettsPools
@BestBettsPools 6 лет назад
Looking good. Can’t wait to see it moving again. Good job!
@FelipeFadini
@FelipeFadini 2 месяца назад
The duck on the hood is the same duck from Convoy, the movie. "Rubber Duck's" Mack has one of these in the hood as well. Nice!
@Boabndi
@Boabndi 6 лет назад
i watched all the other videos today for the first time and i was worried i wouldn't see another video until next year lol
@jonathoncopeland7492
@jonathoncopeland7492 6 лет назад
Good choice on the head lights. That look way better on it. I mentioned that early on one of your earlier videos.
@joepeterbilly2922
@joepeterbilly2922 6 лет назад
Hey Man, good videos. My '87 359 has a factory air switch for the front brakes on the dash just above the suspension and lock up switches. I run them all the time, but if it's icy or gross I can shut 'em off. It's great, you can always steer and don't have to worry about one side or the other locking up. (Also good if the fronts are out of adjustment lol). People have to remember, that old gear was built and run long before ABS came on the scene.
@TwinStix
@TwinStix 6 лет назад
Joe Gannon ... no school like old school 😎
@Stevop79400
@Stevop79400 6 лет назад
I love what your doing. Can’t wait to see more. That truck is bad ass. Never knew about front breaks.
@manuelmacias1057
@manuelmacias1057 6 лет назад
Very good job, I will be following your work and I wish you the best for this restoration greetings from Mexico
@Theuf28
@Theuf28 6 лет назад
very interesting my friend! keep videos coming please! i cant wait to see it restored!
@rags-fv6ko
@rags-fv6ko 6 лет назад
Thanks for the update looking great
@thecrowgto5191
@thecrowgto5191 6 лет назад
Amazing job makeing her like new again keepIt up love watching these
@fizixx
@fizixx 5 лет назад
I just started watching your progress. Everything looks great so far. You're making progress. Takes time, when you're doing things solo, and of course....money doesn't grow on trees. I had NO idea there weren't front brakes. I'm not sure I'd be ok with that. I'd suggest, for small, manageable parts, get a stand-alone sandblaster that is self-contained. You won't go through sand nearly as much and it's a breeze cleaning parts. You could probably just build your own, but they aren't expensive, given that you have the space to keep one and you have the compressor(s) and lines. Keep up the good work!
@chrisw.3000
@chrisw.3000 6 лет назад
Keep up the progress. Gives me something to look forward to.
@joehinkley668
@joehinkley668 6 лет назад
The duck comment is pricless 😂😂😂😂😂 lookin good
@blacksmoke5009
@blacksmoke5009 6 лет назад
A diamond in the ruff ! Nice video thanks for sharing 👍
@cooper109
@cooper109 6 лет назад
Incredible that it never had front brakes from the factory... great job
@hiby9105
@hiby9105 5 лет назад
air trac suspension, tough as nails never breaks!!
@myroadtours6147
@myroadtours6147 6 лет назад
Brakes, who needs brakes...okay, j/k lol. Anyhow, cool project! Love old Petes!
@matowixunplugged7927
@matowixunplugged7927 6 лет назад
Making a truck with no breaks that's a smart design
@TwinStix
@TwinStix 6 лет назад
Paul Williams no front brakes ... will have all new rears ... perfectly acceptable according to Canadian transport law. Keep in mind this and many other trucks like it pulled thousands of loads in this configuration with no issue
@matowixunplugged7927
@matowixunplugged7927 6 лет назад
359 TwinSticks but front breaks on all vehicles do most of the stopping power it's physics. It's just surprising that they didn't put on front breaks were they trying to save money. It's a beautiful truck did you get it at a good price when it was sitting in that field I wonder why the owner left a good truck like that to rot away. Thanks
@TwinStix
@TwinStix 6 лет назад
Paul Williams front brakes can be a hinderance on a muddy road ... cause the tires to lock up and slide you into the ditch ... even on the new truck the majority of the braking comes from the back due to the significant load placed on the rears by the fifth wheel. Got a good deal on the truck as I bought it as is where is ... new exhaust pipes are gonna cost me more than I paid for the whole truck. This truck was the previous owner’s pride and joy but his health caused him to park it many years ago.
@matowixunplugged7927
@matowixunplugged7927 6 лет назад
359 TwinSticks thanks.
@jerrythegaffer
@jerrythegaffer 6 лет назад
Enjoying watching looking forward to the next episode
@deanbrown4512
@deanbrown4512 6 лет назад
You are doing a great job.
@isakalfredsson8264
@isakalfredsson8264 6 лет назад
Amazing build can't wait for more!
@blueoreocookie
@blueoreocookie 6 лет назад
Great videos
@oswaldmarquez4543
@oswaldmarquez4543 6 лет назад
I can't wait to see the next video this 100 percent awesome.
@tnmoe-
@tnmoe- 6 лет назад
Looking good man, you're lucky, we just had a freezing rain storm in Onterrible. Got as much snow as we had most of the winter today.
@kurtguy4336
@kurtguy4336 6 лет назад
Thing will be badass. Still disagree with a newer bunk though if that’s still the plan
@TwinStix
@TwinStix 6 лет назад
Kurt Guy ya the bunk I bought will probably go on ... condition is too good and will save a bunch of $$$ ... it’s a 63 flat top from an 89 Pete 379 so it will be exact other than the door on the driver side is smaller. I’ll always have the cool cap from this one if I get ambitious and want to swap
@kurtguy4336
@kurtguy4336 6 лет назад
So the interior will match ?
@TwinStix
@TwinStix 6 лет назад
Kurt Guy ... Ya make the cab match the new or I guess newer sleeper I bought that has a gray and black interior.
@andrewmunczenski3632
@andrewmunczenski3632 6 лет назад
can't wait to see more progress.
@hommie789
@hommie789 5 лет назад
Jake switch looks good but you should have two, one for on off and a second 3 position switch for low, medium and high or middle two cylinders on low, front two and rear two for medium and all 6 for high. Straight on off you either have all running with is overkill for most situations or half which could leave you scrambling when you need more at the wrong time. front brakes were an option that a lot of trucks never came with. If you have a "rain/dry" switch in the cab it had front brakes otherwise it didn't.
@SOT03Y
@SOT03Y 6 лет назад
Enjoying watching the videos so far mate, keep up the good work
@kize32
@kize32 6 лет назад
That duck will ruin the truck's aerodynamics
@PiotrT-ue1jw
@PiotrT-ue1jw 6 лет назад
You got yourself new subscriber. Cool project! Can't wait to see more ;)
@BAZZAROU812
@BAZZAROU812 6 лет назад
Been following you and looking forward to your next video..
@dodgeramdiesel1734
@dodgeramdiesel1734 6 лет назад
Awesome series. Keep up the great work
@jameswilliams5015
@jameswilliams5015 6 лет назад
You should have used a 5000 psi pressure washer. It would have stripped all that rust and paint off and a little cheaper
@DrewGangl
@DrewGangl 6 лет назад
Keep em coming buddy
@samuraisubzero3384
@samuraisubzero3384 6 лет назад
keep it up, your doing a good job 👍
@garysisk3431
@garysisk3431 4 года назад
I am late to the party, whats new. I just seen your stuff yesterday, been watching Weston do his truck rebuild and this came up. REally enjoy seeing the keeping the old trucks alive, keep them coming
@curt2580
@curt2580 3 года назад
Weston? what’s his channel?
@edspencer7121
@edspencer7121 6 лет назад
Gotta love those old Petes. It's a shame the previous owner abandoned her like that.
@TwinStix
@TwinStix 6 лет назад
Wasn’t by choice ... his health took a turn for the worse so he was forced to let her sit out there. I’m grateful he was willing to part with her and let me take a run at bringing her back to life
@edspencer7121
@edspencer7121 6 лет назад
359 TwinSticks Good you were able to get the old girl. It would be cool vid giving the previous owner a ride when you get here done. Been following these vids since I subbed.👍
@WEARETHEJAARMY
@WEARETHEJAARMY 5 лет назад
At 3:30 We have a radio EXACTLY like that one Almost brand new Looks good And is in good condition it works aswell.
@horseriding2991
@horseriding2991 6 лет назад
Love the truck
@dustinrieck312
@dustinrieck312 6 лет назад
I am not sure if you are going to but if you are cleaning the frame up you should pull the 5th wheel off the frame it will be nasty under there I pull mine off once a year to clean and paint under it to stop the rust. Like to see guys bring back the old trucks they will last longer then the new cheap junk they build now.
@TwinStix
@TwinStix 6 лет назад
Distin Rieck ya that’s the plan ... lots of rust jacking between the inner and outer channels as well that’ll need to be cleaned out
@tewetersonog9855
@tewetersonog9855 6 лет назад
dude great find keep up the videos :)
@tony4metallicaify
@tony4metallicaify 6 лет назад
I want more videos, truck is looking good.
@lucasdemerchant2351
@lucasdemerchant2351 6 лет назад
I can't wait to see it run
@TwinStix
@TwinStix 6 лет назад
Lucas Demerchant ya it’ll be pretty cool to have her move under her own power again
@201roadrage201
@201roadrage201 6 лет назад
Great videos. I would LOVE to build a project truck. Keep up the good work!
@ethanbarnaby3523
@ethanbarnaby3523 4 года назад
Awesome fkn video !
@waltereldridge9447
@waltereldridge9447 6 лет назад
How about replacing the floor with nice hardwood. That would look great.😊👍
@fatihi1982
@fatihi1982 Год назад
Nice
@justinlopez4806
@justinlopez4806 6 лет назад
As long as you sand the tanks down good you could polish the tanks out good
@javierestrada6927
@javierestrada6927 5 лет назад
Call the truck big blue
@user-rs1990
@user-rs1990 6 лет назад
For the headlights, use LED sealed-beam units.
@TV_Offroad
@TV_Offroad 6 лет назад
Turn on those ad's brother get you some extra revenue coming in on this project, invested on this build with you!
@ehhjeep
@ehhjeep 6 лет назад
Look up history of Al Peterman that started Pete. Please think about a wood panel in front of the seats. Black and grey will look killer.
@stevefairweather159
@stevefairweather159 6 лет назад
I would keep the dual round “classic” factory headlights, it makes the front fenders look too wide with small single headlights when it’s coming at you. Keep it classy and stock. Just my 2 cents. Your truck is so worth restoring !
@hotrodhog2170
@hotrodhog2170 5 лет назад
They weren't dual round, they were dual rectangle headlights.
@GrandmaKeith
@GrandmaKeith 5 лет назад
Put some super singles in the rear
@13raden
@13raden 6 лет назад
this is awesome! Just watched all the videos. I work at Stahl peterbilt. Hope the parts guys are treating you well. Ill have to ask the foremans if they recognize the name that was on the sleeper.
@TwinStix
@TwinStix 6 лет назад
Aaron’s been a big help
@randyhale4181
@randyhale4181 6 лет назад
Very cool🤘🏻🤘🏻🤘🏻🤘🏻
@adrenalinowner7992
@adrenalinowner7992 6 лет назад
Watch the rear diffs for rot as you go through everything, I will be doing this kind of work as well with my 2002...
@mwhitelaw8569
@mwhitelaw8569 6 лет назад
Since you shop at 4states trucks you should check out the floor in Bryan's 359 It'll give you some ideas
@kman-mi7su
@kman-mi7su 6 лет назад
Coming along nicely! I like the homage to the Rubber Duck Mack truck on the hood LOL! Did you get a replacement sleeper yet? I remember talking to you on here and you said the original needed too much work and you weren't going to sink the money into it. Budgets count, been there done that myself. I recently let go of my 94 Mack CH after owning her since new, she had started to rust in places and needed an overhaul and the transmission had gone out. Miss the old Bulldog, she was a family member at this point. Got a good deal on a four year old one.
@TwinStix
@TwinStix 6 лет назад
Yup picked up the sleeper and it’s sitting in the shop waiting to be mounted. Old sleepers the next thing to come off. You can see the new sleeper in an earlier video I posted. Planning to paint the can and hood that same colour
@kostyan_389
@kostyan_389 3 года назад
👍👍👍👍👍👍
@actorzone856
@actorzone856 6 лет назад
A bloke here in aus has for sale a Mack Superliner on Trucksales Australia, he restored it spent $350,000, now selling, asking $300,000 so trucks can cost a lot of money plus time to restore.
@TwinStix
@TwinStix 6 лет назад
actorzone is that Jon Kelly of HHA? I’m thinking it’s the one he featured on an episode of Megatruckers on Netflix
@actorzone856
@actorzone856 6 лет назад
359 TwinSticks, I don't know, i was looking at Mack trucks and came across this advert, If you look up Trucksales.com.au obviously and Australian website its listed for sale at the moment as i checked it before commenting
@marcinjakubik8218
@marcinjakubik8218 6 лет назад
Keep making these vids
@HaulingDonkey
@HaulingDonkey 4 года назад
I am curious... why are there two trolley brakes by the steering column? I have only ever seen one before.
@jimnickles2347
@jimnickles2347 6 лет назад
Run that air line on the rear axle UNDER the radius rod, it will break when you go through a hole, and chafe badly.
@user-dq7ou5si6p
@user-dq7ou5si6p 6 лет назад
Очень интересный проект, привет автору из России, у нас такой грузовик не найти)))
@user-kp5ep8od8w
@user-kp5ep8od8w 6 лет назад
Артем Кузьмин Украина тоже смотрит. Интересно смотреть восстановление техники.
@user-jp4dj8ty2s
@user-jp4dj8ty2s 6 лет назад
Артем Кузьмин есть и не такие
@carlcarlandcarl
@carlcarlandcarl 6 лет назад
was waiting for this video, nice job tho!
@samuelkrinninger3060
@samuelkrinninger3060 6 лет назад
I've been waiting for this video
@mikedubz5576
@mikedubz5576 2 года назад
I have an old 2004 Ken t800 and want to do a sandblast paint on the rear Chassi when i go ask what is the number i should expect to hear as far as price?
@robertcowan8211
@robertcowan8211 6 лет назад
also air track susp bushing kits
@thecrowgto5191
@thecrowgto5191 6 лет назад
U can get aftermarket tanks for pretty cheap
@eliakimseleguim2716
@eliakimseleguim2716 5 лет назад
Como está a condição dos eixos traseiros? Estão bom, você não vai desmontar para revisar?
@warrenholmar1129
@warrenholmar1129 5 лет назад
Front brakes due to ice they aren't fitted?
@a.a7648
@a.a7648 6 лет назад
cool
@tttco
@tttco 6 лет назад
love the progress. great job!!! how much were the chrome air cleaners?? I have a 351 Pete with one old steel air filter I would like to replace. my truck has a 5x4
@TwinStix
@TwinStix 6 лет назад
T&F Logging guy that sold me the truck threw them into the deal but I’ve seen them in the local paper for $500 ... nice to hear another twin stick is still running out there
@connerduffy2105
@connerduffy2105 6 лет назад
Can you make another video on the progress?
@g41thomas
@g41thomas 6 лет назад
Coming along pretty nicely. Can you please tell us how much is the total budget you considering for this job? Thank you
@TwinStix
@TwinStix 6 лет назад
Just gonna keep at it until it’s done ... wherever I land it’ll still be south of a new one 😏
@magnuslonnb4869
@magnuslonnb4869 6 лет назад
plastic brake lines is ok , but make sure its ápproved tubes , its are many brands and shit plastic hoses out on the market ,
@littlewingpsc27
@littlewingpsc27 6 лет назад
Great progress. Do you have experience doing this before, or are you learning as you go? Looks like a lot of work, but also a lot of fun. A real cool project.
@TwinStix
@TwinStix 6 лет назад
littlewingpsc27 ... nope ... learning as I go 😆 but having a great time doing it
@kodipauley4076
@kodipauley4076 6 лет назад
You aught to start doing some junkyard watching and find you a disk brake setup to put under it
@danwake4431
@danwake4431 6 лет назад
Just discovered your videos today. You have a good voice for this type of thing. What are the two levers on the right of the steering column that say something about parking on them?
@TwinStix
@TwinStix 6 лет назад
Thanks ... the longer lever controls the air to the trailer brakes ... think of it like the slider on your trailer brake actuator on your pickup. All rigs have these but this truck has a second shorter lever for the CAT Brakesaver ... essentially a reverse torque converter that applies engine oil either automatically or when you pull the lever in manual mode ... the drag of the oil slows the engine and drive train so it’s another tool you have for stopping. There is a warning on both that says “do not use for parking”
@eyeballdude
@eyeballdude 6 лет назад
I don’t know if it’s because I’m swedish or why, but for me, to see a (relativly) modern truck without front brakes, from the factory is mindblowing! Sad to day but no wonders that american trucks aren’t allowed here. Just curious: Until when was it allowed to drive around without front brakes? Or is it allowed still, if you haul a trailer? Great vids btw!! 👍
@xxpr0nag3xx
@xxpr0nag3xx 6 лет назад
I don't know the year it was mandatory for steer brakes but i do know that the reason you didn't need steer brakes was because they do almost nothing when loaded. Cars brake about 75-90% in the front because all the inertia is transferred to the front bumper when you brake. When a On rad truck brakes, its more like 15-30% as all the inertia is transferred to the fifth wheel pin centered over your drive axles. Also not having front brakes lessened the chance of a jack knife when braking. Instead of what little inertia is transferred going to the front bumper going straight to the ground, the steer tires sort of carry it forward. Its not REALLY measurable and with or without a guy wont notice much of a difference, but the old timers i talk to say that braking down hill felt more safe in a non brakes steer then a brakes steer.
@eyeballdude
@eyeballdude 6 лет назад
And there you go! I've learned something new today also! =) Thank you for the good informative reply! Keep on trucking
@joshtalbert801
@joshtalbert801 6 лет назад
I got a set of used fuel tanks off my 379 with b model if u need any
@TwinStix
@TwinStix 6 лет назад
Josh Talbert awesome ... send me an email to 359twinsticks@gmail.com with the details
Далее
Peterbilt 359 Restoration Ep.11 Frame Rework
2:52
Просмотров 181 тыс.
Я ДОСТРОИЛ ЗАВОД - Satisfactory
19:13
Просмотров 167 тыс.
Cute kitty gadgets 💛
00:24
Просмотров 11 млн
Х.евая доставка 😂
00:23
Просмотров 1,3 млн
Peterbilt 359 Restoration Ep. 45 Mudflaps and Chrome
21:54
Mr. Harry's 1 of 1 1986 Peterbilt 359 with a CAT 3408
22:01
Peterbilt 359 Restoration Ep.23 Power Divider Removal
19:30
New Frame 1987 Peterbilt 359 Restoration Part: 4
19:35
How To Make Your 4x4 Chassis Brand New Again
5:31
Просмотров 159 тыс.
Я ДОСТРОИЛ ЗАВОД - Satisfactory
19:13
Просмотров 167 тыс.